|
A Monolithic End Mill With A Cylindrical Shank. Diameter - 10 Mm. The Length Of The Working Part Is 22 Mm, The Total Length Is 72 Mm. Shank Diameter - 10 Mm. The Angle Of Inclination Of The Spiral Is 30-35°. Number Of Teeth - 4. Group Of Processed Materials: P, K, N. End Mills With A Cylindrical Shank Are Intended For Milling Grooves, Ledges And Planes In Parts Of Various Grades Of Steel, Cast Iron, Non-Ferrous Metals And Alloys. The Material Of The Cutter Is Hss High-Speed Steel (P6m5 - Tungsten 6%, Molybdenum 5%) According To Gost 19265. Excellent Resistance To Wear And Damage. Series Of Cutters: Series 320 Material: Р6м5 Shank Type: Cylindrical Ød Of Cutters: 10 Type Of Cutters: End Angle Of Inclination Of Spiral Cutters: 30-35 Processed Material: P - Steel K - Cast Iron N - Colored Metals Ød Of Shank: 10 Number Of Teeth: 4 L :72 Lc:22, Templates For Determining The Nominal Pitch Size Of A Metric Thread 0.25-6.0 Mm, Full Profile 60°. Threaded Templates For Internal And External Measurements, Thin Toothed Plates. Checking The Thread Is Carried Out By Placing The Appropriate Plate On It Until The Template Is Firmly Attached To The Thread. Number Of Petals: Total - 24 Pcs. 12 S On Each Side. 0.25; 0.3; 0.35; 0.4; 0.45; 0.5; 0.6; 0.7; 0.75; 0.8; 0.9; 1.0. 1.25; 1.5; 1.75; 2.0; 2.5; 3.0; 3.5; 4.0; 4.5; 5.0; 5.5; 6.0., B1-30X20x40 Radial Tool Holder, Right. Cutter Holder Type B1, Radial, Right, Shortened Series. The Base Support Surface Is Located Below The Center Axis (Spindle Rotation Axis). For Radial And Longitudinal External Turning. Holders In A Turret Type B1 For Cutters With A Rectangular Section. The Block Of The External Holder Is Used For External Longitudinal Processing And Face Turning. The Cutter Is Installed With The Plate Up, The Support Surface Of The Cutter Is Below The Center Axis. The Cutter Holder Is Equipped With A Din 69880 (Gost 24900) Shank With Teeth, Which Is Installed In A Special Hole In The Turret Head Of The Machine. Execution:Right B1:70 B2:35 B3:10 D1:30 H1:20/16 H5:28 H6:38 L1:22 L2:40 Holder Series:B1, Diameter: F-50 Mm Brand: Steel 45 Length: 1 Meter 3 Pieces Gost 1050-88, A Monolithic End Mill With A Cylindrical Shank. Diameter - 8 Mm. The Length Of The Working Part Is 63 Mm, The Total Length Is 19 Mm. Shank Diameter - 8 Mm. The Angle Of Inclination Of The Spiral Is 30-35°. Number Of Teeth - 4. Group Of Processed Materials: P, K, N. End Mills With A Cylindrical Shank Are Intended For Milling Grooves, Ledges And Planes In Parts Of Various Grades Of Steel, Cast Iron, Non-Ferrous Metals And Alloys. The Material Of The Cutter Is Hss High-Speed Steel (P6m5 - Tungsten 6%, Molybdenum 5%) According To Gost 19265. Excellent Resistance To Wear And Damage. Series Of Cutters: Series 320 Material: Р6м5 Shank Type: Cylindrical Ød Of Cutters: 8 Type Of Cutters: End Angle Of Inclination Of The Spiral Of Cutters: 30-35 Processed Material: P - Steel K - Cast Iron N - Colored Metals Ød Of Shank: 8 Number Of Teeth: 4 L :63 Luke:19, Current Measuring Clamps. Function Of Non-Contact Determination Of Voltage (Ncv) Constant Current: 0.01 A ... 600 A, Error ±2% ±5 Units Of Calculation. Temperature: -40°С ... ~+1000°С, Error ±1.5% ±5 Units Of Calculation. Capacitance: 10 Pf ... 60,000 Μf, Error ±4% ±5 Units Of Count. Phase Detector. Automatic Selection Of Measurement Limits, Diameter: F-60 Mm Brand: Steel 45 Length: 1 Meter 3 Pieces Gost 1050-88, Photo Relay Frl-02 5-50Lk 10A Sensor Type: Built-In Material: Plastic Mounting Method: Open Adjustable Measurement Range: Yes Nominal. Voltage 230 V Degree Of Protection: Ip44, A Monolithic End Mill With A Cylindrical Shank. Diameter - 6 Mm. The Length Of The Working Part Is 57 Mm, The Total Length Is 13 Mm. Shank Diameter - 6 Mm. The Angle Of Inclination Of The Spiral Is 30-35°. Number Of Teeth - 4. Group Of Processed Materials: P, K, N. End Mills With A Cylindrical Shank Are Intended For Milling Grooves, Ledges And Planes In Parts Of Various Grades Of Steel, Cast Iron, Non-Ferrous Metals And Alloys. The Material Of The Cutter Is Hss High-Speed Steel (P6m5 - Tungsten 6%, Molybdenum 5%) According To Gost 19265. Excellent Resistance To Wear And Damage. Cutter Series: Series 320 Material: Р6м5 Shank Type: Cylindrical Ød Milling Cutter:6 Type Of Milling Cutter:End Angle Of Inclination Of The Milling Spiral:30-35 Processed Material: P – Steel K – Cast Iron N - Colored Metals Ød Of Shank:6 Number Of Teeth:4 L:57 Lc:13, Diameter: F-30 Mm Brand: Steel 45 Length: 1 Meter 3 Pieces Gost 1050-88, Plastic For 3D Printing. Color - Turquoise (Luminophore) Weight 0.5 Kg (1.75 Mm) Plastic Type Glows In The Dark. Extruder Operating Temperature: From 190 To 230C, Platform From 0 To 60C Pla In A Box 1 Coil., Coolant Supply Tube. Thread M6. Length 50 Mm. Material: Copper., Cable Channel (60*40) 40 M. White Folk Material: Pvc Plastic Length: 2000 Mm. Height: 40Mm. Width: 60., A Monolithic End Mill With A Cylindrical Shank. Diameter - 4 Mm. The Length Of The Working Part Is 11 Mm, The Total Length Is 43 Mm. Shank Diameter - 4 Mm. The Angle Of Inclination Of The Spiral Is 30-35°. Number Of Teeth - 4. Group Of Processed Materials: P, K, N. End Mills With A Cylindrical Shank Are Intended For Milling Grooves, Ledges And Planes In Parts Of Various Grades Of Steel, Cast Iron, Non-Ferrous Metals And Alloys. The Material Of The Cutter Is Hss High-Speed Steel (P6m5 - Tungsten 6%, Molybdenum 5%) According To Gost 19265. Excellent Resistance To Wear And Damage. Series Of Cutters: Series 320 Material: Р6м5 Shank Type: Cylindrical Ød Of Cutters: 4 Type Of Cutters: End Angle Of Inclination Of Spiral Cutters: 30-35 Processed Material: P - Steel K - Cast Iron N - Colored Metals Ød Of Shank: 4 Number Of Teeth: 4 L :43 Lc:11, Diameter: F-40 Mm Brand: Steel 45 Length: 1 Meter 3 Pieces Gost 1050-88
|
