|
Tender For Civil Repair And Maintenance Work At Epfo Renting Out Section (F.F.) At Bsnl Main T. Exchange Building In Chhindwara (Mp). (3Rd Call); 1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2 (i)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 3 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 4 (i)Of area 3 sq. metres and below 5 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 6 (i)For thickness of tiles 10 mm to 25 mm 7 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 8 (i)15 mm to 40 mm nominal bore 9 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 10 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 11 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 12 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 13 (i)1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 14 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. 15 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 16 (i)Fixed to steel windows by welding 17 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 18 (i)150x10 mm 19 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 20 (i)100 mm 21 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 22 (i)300 mm weighing not less than 330 grams 23 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete. 24 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. 25 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a)Single socketed pipes. 26 (i)75 mm diameter 27 (ii)110 mm diameter 28 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(a)Single tee with door 29 (a)Single tee with door 30 (i)75x75x75 mm 31 (ii)110x110x110 mm 32 (b)Single tee without door 33 (i)75x75x75 mm 34 (ii)110x110x110 mm 35 (c)Bend 87.5° 36 (i)75 mm bend 37 (ii)110 mm bend 38 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 39 (i)75 mm 40 (ii)110 mm 41 Varnishing with varnish of approved brand and manufacture: 42 (i)One or more coats with copal varnish. 43 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 44 (i)25 to 40 mm nominal bore 45 Providing and fixing PTMT grating of approved quality and colour. (a)Circular type. 46 (i)100 mm nominal dia. 47 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : (a) For fixed portion 48 (i)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 49 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 50 (i)With stainless steel cover plate minimum 1.25 mm thickness. 51 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 52 12 mm cement plaster of mix : 53 (i)1:6 (1 cement: 6 coarse sand) 54 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 55 (i)Two or more coats on new work. 56 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 57 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 58 (i)Two coats. 59 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. 60 (i)Old work (one or more coats) 61 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. 62 (i)With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. 63 White washing with lime to give an even shade : 64 (i)Old work (two or more coats) . 65 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 66 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. 67 (i)With cement mortar 1:4 (1 cement : 4 fine sand). 68 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 69 (i)Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 70 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 71 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (a)Semi rigid pipe 72 (i) 32 mm dia 73 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 74 (i)25 mm nominal bore 75 Providing and fixing uplasticised PVC connection pipe with brass unions : (a)30 cm length 76 (i)15 mm nominal bore 77 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 78 (i)15 mm nominal bore 79 (ii)20 mm nominal bore 80 (iii)25 mm nominal bore 81 Providing and fixing PTMT bib cock of approved quality and colour. 82 (i)15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 83 Providing and fixing PTMT stop cock of approved quality and colour. 84 (i) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. 85 Providing and fixing PTMT grating of approved quality and colour. (a)Circular type. 86 (i)100 mm nominal dia. 87 Cutting holes up to 30x30 cm in walls including making good the same: 88 (i) With common burnt clay F.P.S. (non modular) bricks. 89 Labour charges for taking out existing Floor spring from aluminium partition and refixing after minor repair,oiling ,greasing etc complete as per direction of E-in-C. 90 Labour charges for fixing frame work for partitions/ wall lining etc. available at sitemade ofupto 50x25x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. 91 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed Work 92 (i)15mm 93 (ii)20mm 94 (iii)25mm 95 (iv)65 mm 96 Removing chokage of H.C.I. or S.W. pipe with split bamboo. 97 (a) Underground 98 (b) Over ground 99 Dismantling & Refixing pit cover 100 Cleaning silt of inspection pit. 101 Uprooting and removing plants from the surface of walls parapet etc and making good damages.(Repairing of damages to be paid separately). 102 (a) Small plant of girth of exposed stem upto 75 m lift upto 6 mtr. 103 Washing and cleaning with oxalic acid powder using 33 gms./sq.m 104 (a) Floor/ dado other than marble 105 Credit Value:(i) Iron items
|
