|
Tender For Biennial Maintenance Rate Contract For Items Common For Office Buildings - Earth Work Excavaton In All Type Of Soil And Depositing On Bank With In A Lead Of 50M And Lift Of 1.5Mincluding Back Filling. Rate Is Inclusive Of Demolishing Bituminous Surface / Concrete / Rubble / Solingstone Etc If Any As Directed By Engineer-In-Charge. 2 Earth Work In Excavation In All Kinds Of Soils By Mechanical Means ( Hydraulic Excavator ) Lift Up To 1.5M Including Dressing Of Sides, Ramming Of Bottoms, Dewatering, Leading Water Into Drains, Getting Out The Excavated Soil As Directed, Within Csl Premises. All Kinds Of Soil 3 Disposal Of Unserviceable Materials From Site To Outside Csl Premises By Usingtipper & Jcb Lead Up To 5 Km , Rate Is Inclusive Of All Operational Expenditure, Including The Operational Cost Of Jcb, As Directed By Engineer-In-Charge. 4 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. 5 Supplying And Filling Inside Basement With Red Earth And Consolidating In Layers Not Exceeding 150Mm Thick Each, In Line And Level Including Watering, Ramming Consolidating And Dressing, Cost And Conveyance Of All Materials, Labour, Other Incidentals Etc Complete. 6 Filling Inside Basement With Red Earth And Consolidating In Layers Not Exceeding 150Mm Thick Each, In Line And Level Including Watering, Ramming Consolidating And Dressing, Cost And Conveyance Of All Materials, Labour, Other Incidentalsetc Complete. ( Excluding Cost Of Red Earth ) 7 Clearing Site Including Uprooting Of Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level, Removal Of Rubbish And Disposal Within Csl Premises As Per Direction Of Engineer-In-Charge Including All Labour, Other Incidentals, Hire For Tools And Plants Etc. Complete. 8 Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish And Debris Within A Lead Of 3Km Including All Labour, Other Incidentals Etc. Complete. 9 Supplying, Spreading And Consolidating Crusher Sand In Layers Not Exceeding 150Mm Thick Each In Line And Level Including Cost And Conveyance Of All Materials Labour, Other Incidentalsetc. Complete. 10 Shoring By Driving Down Steel Sheet Piles And Properly Anchored For The Eathwork Carefullly Without Damaging The Near By Structures, Dismantling The Shoring After The Completion Of Work Including All Labour, Hire Charges Of Materials And Equipments, Other Incidentals Etc. Complete. ( Measurement Will Be Made For The Area Visible For Retaining The Earth ) . 11 Providing And Laying In Position Cement Concrete Of Grade 1:4:8 Using 40Mm Nominal Size Stone Aggregate Including Cost And Conveyance Of All Materials, Labour For Mixing, Laying, Consolidating Curing Etc. Complete But Excluding Cost Of Cement And Cost Of Formwork. 12 Providing And Laying Plain Cement Concrete 1:3:6 Using 20Mm Down Gradedbroken Stones Including Cost And Conveyance Of All Materials , Labour For Mixing, Laying, Consolidating Curing Etc.Complete But Excluding Cost Of Cement And Cost Of Formwork. 13 Providing Form Work, Centering And Shuttering Including Strutting, Propping Using Shuttering Sheet, Supporting Beams, Supporting Jacks, Wooden Planks And Other Incidentals Etc. Including Removal Of Formwork After Completion Of Work And Clearing All Materials And Cost And Conveyance Of All Materials Labour Etc 14 Form Work For Bed Concrete 15 Form Work For Sides 16 Pumping And Laying The Ready Mixed M-20 / M-15 Grade Concrete Up To The Fourth Level Ofroof Slab Of Buildings For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work, Including Pumping Of R.M.C.From Transit Mixer To Site Of Laying Excluding The Cost Of Centering, Shuttering And Fabrication Of Reinforcement Fe 500D, Including Cost Of Admixtures In Reccomended Proportions As Per Is : 9103 To Accelerate / Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer-In-Charge.But Excluding Cost Of Cement, Cost Of Formwork And Cost Of Reinforcement. ( Cement , Formwork And Reinforcement Which Will Be Measured Separately ) . 17 Providing And Laying Reinforced Cement Concrete 1:2:4 Using 20Mm Down Gradedbroken Granite Metal In Ground Floor Upto 5M Height Including Cost And Conveyance Of All Materials, Labour For Mixing, Laying, Consolidating, Curing, Cost Of Dewateringetc.Complete But Excluding Cost Of Cement, Cost Of Formwork And Cost Of Reinforcement. ( Cement , Formwork And Reinforcement Which Will Be Measured Separately ) . 18 Providing And Laying Reinforced Cement Concrete 1:1.5:3 Using 20Mm Down Gradedbroken Granite Metal For Columns , Beams And Slabsincluding Cost And Conveyance Of All Materials, Labour For Mixing, Laying, Consolidating, Curing, Cost Of Dewatering Etc.Complete But Excluding Cost Of Cement, Cost Of Formwork And Cost Of Reinforcement. ( Cement , Formwork And Reinforcement Which Will Be Measured Separately ) . 19 All Work Upto Plinth Level 20 Above Plinth Level Up To Fourth Floor Level 21 Providing Formwork Using Wooden Planks, Joists, Shuttering Sheet, Supports Etc. Including Cost And Conveyance Of All Materials Labour Etc.Complete Removal Of Form Work After Completion Of Work For Beams, Colomns, Lintels& Sunshades 22 Upto Ground Floor Roof ( Upto 5M Ht. ) . 23 From First Floor Upto Third Floor Level 24 Fabrication Of Reinforcement For Rcc Work Including Cost And Conveyance Of All Materials, Labour For, Uncoiling, Straightening, Cutting, Bending, Laying & Tying With 22G Binding Wire Etc.Complete But Excluding Cost Of Steel ( Mild Steel Or Tor Steel ) But Including Cost Of Binding Wire. 25 Random Rubble Masonry In Cement Mortar 1:6 & Pointing With Cm 1:3 Including Cost And Conveyance Of All Materials, Labour, Other Incidentals Etc Complete, Excluding Cost Of Cement. 26 Foundation And Plinth Level 27 Superstructure Above Plinth Level 28 Brick Work In Cm 1:4 Using First Class Burnt Bricks ( 21X10x5cm ) Including Cost And Conveyance Of All Materials , Labour, Other Incidentals Etc Complete, Excluding Cost Of Cement. 29 Rate For Foundation And Plinth Level 30 Superstructure Above Plinth Level Up To Floor V Level 31 Brick Work In Cm 1:4For Half Brick Wall Using First Classburnt Bricks ( 21X10x5cm ) For Superstructure Including Cost And Conveyance Of All Materials, Labour, Other Incidentals Etc Complete, Excluding Cost Of Cement. 32 Foundation And Plinth Level 33 Superstructure Above Plinth Level Up To Floor V Level 34 Providing And Constructing 30X20x15 Cm Solid Concrete Block Masonry In Cm 1:5 In Walls Work Up To V Floorlevel, Using Best Quality Solid Concrete Blocks Including Cost & Conveyance Of All Materials, Scaffolding, Curing, Racking Joints, Watering, Labour, Delivery, Handling, Unloading, Storing Of All Materials, Wastage, Etc Complete But Excluding The Cost Of Cement As Directed By The Engineer - In - Charge. 35 Providing And Constructing 30X20x10cm Solid Concrete Block Masonry In Cm 1:5 In Walls Up To V Th Floor Level, Using Best Quality Solid Concrete Blocks Including Cost & Conveyance Of All Materials, Scaffolding, Curing, Racking Joints, Watering, Labour, Delivery, Handling, Unloading, Storing Of All Materials, Wastage, Etc Complete But Excluding The Cost Of Cement As Directed By The Engineer - In - Charge. 36 Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm / 230Mm / 300 Mm Thick Aac Blocks In Super Structure Above Plinth Level Up To Floor V Level With Rcc Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer In-Charge. ( The Payment Of Rcc Band And Reinforcement Shall Be Made For Seperately ) . 37 Woodwork Wrought And Put Up Including Cost And Conveyance Of All Materials Labour Other Incidental Etc. Complete. 38 Teak 39 Anjili Wood 40 Cheruteak 41 Wood Work Planed And Framed Work Including Cost, Labour Etc. Complete. 42 Teak 43 Anjili Wood 44 Cheruteak 45 Providing And Fixing Fully Paneled Shutters To Suit The Window / Door Frames Already Fixed In Position Using 90 / 100X35mm Shutter Frames And 16Mm Thick Panel Including Painting With One Coat Of Wood Primer, Cost And Conveyance Of All Materials Labour Etc. Complete.Excluding Cost Of Fixtures. 46 Teak 47 Anjili Wood 48 Cheruteak 49 Providing And Fixing Fully Glazed Windows / Ventilators To Suit Window Frames Already Fixed In Position Using 90X35mm Shutter Frames, 4Mm Thick Plain Glass, Painting One Coat Of Wood Primer Including Cost And Conveyance Of All Materials Labour Etc. Complete. Excluding Cost Of Fixtures 50 Teak 51 Anjili Wood 52 Cheruteak 53 Providing And Fixing Flush Door Shutters Using Cheruteak Wood Members 100X35mm Size For Verticals 2 Nos. Horizontals 3 Numbers And Panel With 12Mm Thick One Side Teak Veneered Plywood Made With 6Mm Thick Commercial Plywood Covered Both Faces With 3.5Mm Ost Boards Including All Cost Of Materials Carriages All Incidentals Etc. Complete Excluding Cost Of Fixtures. 54 Supplying And Fixing In Position Half Glazed Wooden Flush Door In Single Leaf Shutter Using Cheruthek Woodplaned And Framed Work Of Size 75Mmx25mm ( 5Nos. Horizontals And 3Nos. Verticals, Arranged Equally Spaced Panels For Each Leaf ) , Fixing 3.5Mm To 4Mm Thick One Side Veneered Plywood On All Faces Including Cost And Conveyance Of All Materials Like Veneered Plywood, Fevicol S.H. Adhesives, Screws, Nails, Labour, Other Incidentals Etc. Complete. ( Rate Is Inclusive Of Cost Of Fixtures Of Fittings Such As , One Hydraulic Door Closer, 100Mm Oxidised Iron Butt Hinges 4Nos., 150Mm Anodised Aluminium Barrel Tower Bolts 2 Nos, 6 Lever Best Quality 1No ( Godrej Or Equivalent ) Mortice Lock With Handle And Applying Two Coats Of Clear Varnish To Exposed Surfaces Etc. Complete. ) .The Door To Have Glazed Areas Ofheight Of 100.5 Cm Using 5 Mm Clearglass , Glass Fixed 103 Cm Above Floor Level On The Wooden Frame Etc Complete As Per Drawing. 55 Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block ( Concrete Block Will Be Measured In Relevant Item. ) 56 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. 57 Supplying And Fixing In Position Planed And Framed Work For Wooden Reapers For Ceiling Etc. 40X20mm Size. 58 Teak Wood Reapers 59 Cheruteak 60 Providing And Fixing Teak Wood Beadings 12Mmx12mmfor Fixing Expanded Metal / Wired Glass / Weld Mesh Etc To The Existing Window / Door Frames Including Cost And Conveyance Of All Materials Labour All Incidentals Etc Complete. 61 Supplying And Fixing 3.5 To 4Mm Thick One Side Teak Veneered Plywood Shutter Including Dismantling The Existing Door And Replacing The Damaged Wooden Membersincluding Charges For Repairing And Replacing The Damaged Wooden Members, Removal Of Decayedplywood, All Cost Of Materials Like Fevicol S.H. Veneered Plywood, Screws, Nails, Other Incidentals Etc Complete ( Area Of Plywood Will Be Measured And Payment Will Be Made For This Area. ) 62 Supplying And Fixing / Replacing Laminated Mica Sheets Of Approved Quality On Doors Etc. Including Cost, Conveyance, Incidentals, Etc. Complete ( Rate Is For Area Of Mica Sheet ) 63 Supplying And Fixing / Replacing Marineplywood To The Doors / Partitions / Floors Etc Including Cost And Conveyance Of All Materials Labour Charges, All Incidentals Etc. Complete ( Any Wooden Frames Required Will Be Paid Separatively. Rate Is For Providing On One Side ) 64 6Mm 65 8Mm 66 12Mm 67 19Mm 68 Repairing By Replacing The Damaged Plywood Paneling With 12Mm / 13Mm Thick Both Face Teak Veneered Plywood ( Prepared With 8Mm Thick Marine Plywood And 4Mm Thick Ost Veneered Plywood On Other Side Joining Together Well With Sr / Sh Adhesive ) After Dismantling The Damaged Paneling Without Damage To The Surrounding Area By Removing The Reaper Carefully And Refixing The Same After Placing The Plwood To Correct Line And Level Including Cost Of Screws, Nails, Labour, Scaffolding Cleaning The Debris Etc. Complete All As Directed By The Engineer- In- Charge. 69 Repairing By Replacing The Damaged Plywood Of Ceiling / Wall Panelling With10 Mm / 11Mm One Side Teak Faceplywood ( Prepared With 6Mm Marine Plywood And 4Mm Thick One Side Teak Veneered Plywood Joining Together On Other Side Joining Together Well With Sr / Sh Adhesive ) After Dismantling The Damaged Paneling Without Damagingthe Surrounding Areas By Removing The Reaper Carefully And Refixing The Same After Placing The Plywood To Correct Line And Level Including Cost Of Screws, Nails, Labour, Scaffolding Cleaning Of Debris Etc. Complete All As Directed By The Engineer- In- Charge. 70 Providing And Fixing / Replacing Stainless Steel Mosquito Proof Nets Made Of Thedoor / Window Frames Already Fixed Using Wooden Beading Screws, Nails Etc. Including Cost And Conveyance Of All Materials Labour Etc. Complete ( Planed And Framed Work If Required For Openable Shutters Will Be Paid Separately. Fittings Will Be Paid Separately ) 71 Providing And Replacing / Fixing Stainless Steel Fixtures To Doors / Windows / Ventilators / Partitions With Necessary Screws , Including Cost And Conveyance Of All Materials Labour Etc. Complete 72 125 X 90 X 4 Mm ( Ordinary Type ) -Butt Hinges 73 100 X 75 X 4 Mm ( Ordinary Type ) 74 75 X 60X 4 Mm ( Heavy Type ) 75 150 X 10 Mm Barrel Tower Bolt 76 100 X 10 Mmbarrel Tower Bolt 77 125 Mm Door Handles 78 100 Mm Door Handles 79 150Mm Aldrop 80 200 Mm Aldrop 81 One Touch Kick Down Foot Operated Door Stopper 82 150 Mm Hooks And Eyes 83 100 Mm Hooks And Eyes 84 Supplying And Fixing / Replacing Approved Quality Indian Make Mortice Lock With Handles. Including Cost And Conveyance Of All Materials Labour And Other Incidentals Etc. Complete. 85 Godrej 86 Puma 87 Supplying And Fixing / Replacing Approved Quality Indian Make Aluminium Lock For Doors. Including Cost And Conveyance Of All Materials Labourand Other Incidentals Etc. Complete. 88 Supplying And Fixing / Replacing Broken Glass Panes For Doors, Windows, Ventilators Etcincluding Cost And Conveyance Of All Materials And Other Incidentals Etc. Complete. ( Rate Includes Cost Of Wooden Beading, Putty, Clips Etc Of Approved Quality Wherever Required ) 89 4Mm Plain Glass 90 4Mm Figured / Pinheaded-Nearest 91 5Mm Plain Glass 92 Suppling And Fixing 8Mm Plain Glass With Edge Rounded For Table Top. 93 Supplying And Fixing Frp Doors With Frame Work Having 1.5Mm Thick Frp Skin Moulded With The Core Material Forming A Sandwich Panel. Necessary Wooden Supports Are To Be Provided For Fixing The Accessories Such As 100 Mm Ss Hinges 3 Nos, 100Mm Ss Tower Bolt 1Nos, 150Mm Ss Aldrop 1Nos, 125Mm Aluminium Handle 2 Nos, With Necessary Screws And Grips Including The Cost And Conveyance Of All Materials Above Mentioned Fixtures, Labour And All Other Incidentalsetc. Complete. 94 With Frame 95 Without Frame 96 Supplying And Fixing Single Moulded Pvc Doors With Frame Of Approved Quality And Brand By The Engineer In Charge. Necessary Wooden Supports Are To Be Provided For Fixing The Accessories Such As 100 Mm Ss Hinges 3 Nos, 100Mm Ss Tower Bolt 1Nos, 150Mm Ss Aldrop 1Nos, 125Mm Aluminium Handle 2 Nos, With Necessary Screws And Grips Including The Cost And Conveyance Of All Materials Above Mentioned Fixtures, Labour And All Other Incidentals Etc. Complete. 97 With Frame 98 Without Frame 99 Supplying And Fixing In Position Fully Glazedupvc Openable Window Using Following Sizes Or Nearest Available Size64 X 64 X 1.5Mm For Outer Frames, 60 X 25.4 X 1.5Mm For Shutters, Mullions / Vertical And Plain Glass 5Mm Thickincluding All Fixtures Like Adequate Locking Arrangements & Handles Using Gear Channel, Section Strengtheningby 1.2Mm Thick Gi C - Section All Around For Puter Frames, Shutters, Mullions / Verticals, Epdm Beadings Etc Including Cost And Conveyance Of All Materials Labour, Other Incidentals Etc. Complete. 100 Supplying And Fixing Fibre Moulded Type Glazed Ventilator Both Frame And Shutter Of Approved Quality And Colour With All Required Fixtures And Fitting Including Cost And Conveyance Of All Materials Labour Etc. Complete. 101 Conveying And Fixing Departmental Doors / Windows With Or Without Shutters ( Cost Of Fittings Not Included ) 102 Supplying And Fixing / Replacing G.I Weld Meshto Wooden / Structural Members, Doors Etc. ( Wooden / Structural Memberswill Be Measured And Paid Separately ) Using Necessary Screws / Welding, Painting With One Coat Of Zinchromite Primer Etc. Complete. 103 G.I Weld Mesh 25Mmx25mmx4mm 104 G.I Weld Mesh 50Mmx50mmx4mm 105 G.I Weld Mesh 50Mmx50mmx6mm 106 Supplying And Fixing, 22G Aluminium Sheets To The Wood Planks / Structural Members, Shelf, Doors, Windows, Walls& Roofs Etc.Including Cost And Conveyance Of All Materials Labour Charges, All Wastages, Other Sundries Etc. Complete. 107 Providing And Laying Plain Cement Concrete 1:1.5:3 Using 6Mm / 12Mm Down Graded Is Nominal Size Hard Broken Metal After Cleaning The Surface And Applying Necessary Bonding Agents Like Nitobond Sbr Or Equivalent @2 Litre / M3for Proper Bonding Between Old And New Concrete Including Cost And Conveyance Of All Materials Formwork, Labour For Mixing, Laying, Consolidating Curing Etc.Complete But Excluding Cost Of Cement. 108 Providing And Laying Plain Cement Concrete 1:1.5:3 Using 6Mm / 12Mm Down Graded Is Nominal Size Hard Broken Metal After Cleaning The Surfaceincluding Cost And Conveyance Of All Materials Formwork, Labour For Mixing, Laying, Consolidating Curing Etc.Complete But Excluding Cost Of Cement. 109 Supplying And Laying Non-Slippery Ceramic Flooring Tiles Not Less Than 300 X 300Mm Size Ofapproved Make , Quality And Colourafter Clearing The Floor Properly By Pasting With Chemical Adhesive Cerabond And Equivalent And Pointing The Joints With Coloured Cement To Match With The Tiles In Line And Level Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete. ( Basic Rate Of Tile Rs. 425 / M2 Excluding Gst ) 110 Supplying And Laying Non-Slippery Ceramic Flooring Tiles Not Less Than 300 X 300Mm Size Ofapproved Make , Quality And Colourafter Clearing The Floor Properly By Pasting With Chemical Adhesive Cerabond And Equivalent And Pointing The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge But Excluding The Cost Of Cement, ( Basic Rate Of Tile Rs. 425 / M2 Excluding Gst ) 111 Providing And Laying Ceramic Anti-Skid Floor Tiles Not Less Than 300 X 300Mm Size Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Bed Of Cement Mortar 1:3, Jointing With Grey Cement Slurry @ 2.2Kg / M2 Including Grouting The Joints With Coloured Cement To Match With The Tiles Including Cost And Conveyance Of All Materials, Labour Other Incidentalsetc Complete As Per Direction Of Engineer - In -Charge, But Excluding The Cost Of Cement ( Basic Rate Of Tile = ?425 / M2 Excluding Gst ) 112 Providing And Laying Ceramic Anti-Skid Floor Tiles Not Less Than 300 X 300Mm Size Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Bed Of Cement Mortar 1:3, Jointing With Grey Cement Slurry @ 2.2Kg / M2 Including Grouting The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge, But Excluding The Cost Of Cement ( Basic Rate Of Tile = ?425 / M2 Excluding Gst ) 113 Supplying And Laying Ceramic Wall Tiles Not Less Than 300 X 200Mm Size Of Premium Quality Of Approved Make , Quality And Colour For Dadoing By Pasting With Chemical Adhesive Cerabond / Equivalent And Pointing The Joints With Coloured Cement To Match With The Tiles In Line And Level Including Cleaning The Existing Surface Properly, Cost And Conveyance Of All Materials Labour Other Incidentalsetc. Complete ( Basic Rate Of Coloured Tiles Rs. 298 / M2 Excl. Gst ) 114 Supplying And Laying Ceramic Walltiles Not Less Than 300 X 200Mm Size Of Premium Quality Of Approved Make , Quality And Colour For Dadoing By Pasting With Cement Over Plastered Surfaceandjointing With Grey Cement Slurry @ 2.2Kg / M2 With Coloured Cementto Match With The Tiles In Line And Level Including Cleaning The Existing Surface Properly, Cost And Conveyance Of All Materials, Labour Other Incidentals Etc. But Excluding Cost Of Cement. Complete ( Basic Rate Of Tile Coloured Tiles Rs. 298 / M2 Excl.Gst ) 115 Providing And Fixing Ceramic Glazed Wall Tiles Not Less Than 450 X 300Mm Of 1St Quality, Of Approved Make, In All Colours And Shades As Approved By The Engineer – In –Charge In Dados Over 12Mm Thick Plastering With Cement Mortar 1:3, Jointing With Grey Cement Slurry @ 2.2Kg / M2 Including Grouting The Joints With Coloured Cement To Match With The Tiles Including Cost And Conveyance Of All Materials, Labour Other Incidentalsetc Complete As Per Direction Of Engineer - In -Charge, But Excluding The Cost Of Cement ( Basic Rate Of Tile = ?468 / M2 Excluding Gst ) 116 Providing And Fixing Ceramic Wall Tiles Not Less Than 450 X 300Mm Of 1St Quality, Of Approved Make, In All Colours And Shades As Approved By The Engineer – In –Charge In Dados Over 12Mm Thick Plastering With Cement Mortar 1:3, Jointing With Grey Cement Slurry @ 2.2Kg / M2including Grouting The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge But Excluding The Cost Of Cement. ( Basic Rate Of Tile = ?468 / M2 Excluding Gst ) 117 Providing And Laying Double Charge Glossy Vitrified Floor Tiles Not Less Than 600 X 600Mm Sizeof Approved Make, Quality And Colourafter Clearing The Floor Properly By Pasting With Chemical Adhesive Cerabond And Equivalent And Pointing The Joints With Coloured Cement To Match With The Tiles In Line And Level Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete ( Basic Rate Of Light Shade Tile = ?565 / M2, Dark Shade Tile = ?684 / M2 Excluding Gst ) 118 Light Shaded Tile 119 Dark Shaded Tile 120 Providing And Laying Double Charge Glossy Vitrified Floor Tiles Not Less Than 600 X 600Mm Sizeof Approved Make, Quality And Colourafter Clearing The Floor Properly By Pasting With Chemical Adhesive Cerabond And Equivalent And Pointing The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge But Excluding The Cost Of Cement, ( Basic Rate Of Light Shade Tile = ?565 / M2, Dark Shade Tile = ?684 / M2 Excluding Gst ) 121 Light Shaded Tile 122 Dark Shaded Tile 123 Providing And Laying Double Charge Glossy Vitrified Floor Tiles Not Less Than 600 X 600Mm Sizeof Approved Make, In All Colours And Shades, Laid On 20Mm Thick Bed Of Cement Mortar 1:3, Pointing The Joints With Coloured Cement To Match With The Tiles In Line And Level Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete ( Basic Rate Of Light Shade Tile = ?565 / M2, Dark Shade Tile = ?684 / M2 Excluding Gst ) 124 Light Shaded Tile 125 Dark Shaded Tile 126 Providing And Laying Double Charge Glossy Vitrified Floor Tiles Not Less Than 600 X 600Mmsizeof Approved Make, In All Colours And Shades, Laid On 20Mm Thick Bed Of Cement Mortar 1:3 Jointing With Grey Cement Slurry @ 2.2Kg / M2including Grouting The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge But Excluding The Cost Of Cement. ( Basic Rate Of Light Shade Tile = ?565 / M2, Dark Shade Tile = ?684 / M2 Excluding Gst ) 127 Light Shaded Tile 128 Dark Shaded Tile 129 Providing And Laying Ceramic Floor Tiles Not Less Than 600 X 600Mm Sizeof Approved Make, Quality And Colourafter Clearing The Floor Properly By Pasting With Chemical Adhesive Cerabond And Equivalent And Pointing The Joints With Coloured Cement To Match With The Tiles In Line And Level Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete ( Basic Rate Of Tile Rs. 502 Excl Gst ) 130 Providing And Laying Ceramic Floor Tiles Not Less Than 600 X 600Mm Sizeof Approved Make, Quality And Colourafter Clearing The Floor Properly By Pasting With Chemical Adhesive Cerabond And Equivalent And Jointing With Grey Cement Slurry @ 2.2Kg / M2 Including Grouting The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge But Excluding The Cost Of Cement. ( Basic Rate Of Tile Rs. 502 Excl Gst ) 131 Providing And Laying Ceramic Floor Tiles Not Less Than 600 X 600Mm Sizeof Approved Make, In All Colours And Shades, Laid On 20Mm Thick Bed Of Cement Mortar 1:3, Pointing The Joints With Coloured Cement To Match With The Tiles In Line And Level Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete ( Basic Rate Of Tile Rs. 502 Excl Gst ) 132 Providing And Laying Ceramic Floor Tiles Not Less Than 600 X 600Mm Sizeof Approved Make, In All Colours And Shades, Laid On 20Mm Thick Bed Of Cement Mortar 1:3, Pointing The Jointing With Grey Cement Slurry @ 2.2Kg / M2 Including Grouting The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge But Excluding The Cost Of Cement. ( Basic Rate Of Tile Rs.502 Excl Gst ) 133 Dismantling & Relayingfloor Tiles Work In All Floors Of The Building Set In Cm 1:3 20Mm Thick And Adding Necessary Cement Grout For The Proper Binding Of The Tiles To Line And Level, Pointing The Joints With Coloured Cement To Match With The Tiles Including Cost And Conveyance Of All Materials Labour Other Incidentalsetc. Complete, Excluding Cost Of Cement. 134 Dismantling & Relayingfloor Tiles Work In All Floors Of The Building Set In Cm 1:3 20Mm Thick And Adding Necessary Cement Grout For The Proper Binding Of The Tiles To Line And Level, , Pointing The Jointing With Grey Cement Slurry @ 2.2Kg / M2 Including Grouting The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge But Excluding The Cost Of Cement 135 Dismantling & Relaying Floor Tiles Work In All Floors Of The Buildingby Pasting With Chemical Adhesive Cerabond / Equivalent And Pointing The Joints With Coloured Cement To Match With The Tiles In Line And Level Including Cleaning The Existing Surface Properly, Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete, 136 Dismantling & Relaying Floor Tiles Work In All Floors Of The Buildingby Pasting With Chemical Adhesive Cerabond / Equivalent And Pointing The Jointing With Grey Cement Slurry @ 2.2Kg / M2 Including Grouting The Joints Of Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout, Including Filling / Grouting, Finishing Etc Complete As Per Direction Of Engineer - In -Charge 137 Supplying And Laying Ferrocon / Scorpio / Planet Green, Step Tiles Of Approved Quality And Colour Set In Cm 1:3 20Mm Thick And Cement Adding Necessary Cement Grout For The Proper Binding Of The Tiles To Line And Level Pointing The Joints With Coloured Cement To Match With The Tiles Including Cost And Conveyance Of All Materials Labour Other Incidentalsetc. Complete, Excludig Cost Of Cement. ( Basic Rate Of Tile Rs. 409 Excl Gst ) 138 Providingand Laying Granite Slab ( Flamed ) Of Approved Quality And Colour Of 18 Mm Or Nearest Available Thickness Laid In Cm1:3, 15 Mm Thick With Necessary Cement Grout For Proper Binding Of Slab Including Cost Of Granite Slab, Making The Edge Round, Polishing And Conveyance Of All Materials Labour, Other Incidentalsetc Complete Excluding The Cost Of Cement. ( Basic Rate 1829 / M2 ) 139 Supplying And Laying Marble Slab ( Cutni / Equivalent ) Of Approved Quality And Colour Of 18 Mm Or Nearest Available Thickness Laid In Cm1:3, 15 Mm Thick With Necessary Cement Grout For Proper Binding Of Slab Including Cost Of Marble Slab, Making The Edge Round, Polishing And Conveyance Of All Materials Labour, Other Incidentalsetc Complete Excluding The Cost Of Cement. ( Basic Rate 1500 / M2 ) 140 Providing And Laying 60Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50Mm Thick Of Compacted Bed Of 6Mm Aggregate, Pvc Sheet, Filling The Joints With Fine Sand Etc Including Finishing The Edges With Concrete All Complete As Per The Direction Of Engineer – In – Charge. 141 Providing And Laying 80Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50Mm Thick Of Compacted Bed Of 6Mm Aggregate, Pvc Sheet, Filling The Joints With Fine Sand Etc. Including Finishing The Edges With Concrete All Complete As Per The Direction Of Engineer – In – Charge. 142 Applying Florolac Paint Of Approved Brand, Quality And Colour To Floors After Rubbing And Cleaning The Surface, Including Cost And Conveyance Of All Materials Labour Etc Complete. 143 Supplying And Fixing Roofing / Cladding With 0.56Mm Thick Or Nearest Available Thickness Aluminium Corrugated Sheet Using Self Tapping Carbon Steel Screws Having High Corrosion Resistance With Required Drill Point, Washers Etc. From Reputed Manufacturers, With Minimum Overlaps Of 150Mm At Ends And Two Full Corrugations On Sides, Including Cost And Conveyance Of All Materials Labour For All Leads And Liftsup To A Height Of 5 Metres, Other Incidentals Etc Complete. 144 Supplying And Fixing Roofing / Cladding With 0.46Mm Thick Or Nearest Available Thickness Aluminium Corrugated Sheet Using Self Tapping Carbon Steel Screws Having High Corrosion Resistance With Required Drill Point, Washers Etc. From Reputed Manufacturers, With Minimum Overlaps Of 150Mm At Ends And Two Full Corrugations On Sides, Including Cost And Conveyance Of All Materials Labour For All Leads And Liftsup To A Height Of 5 Metres, Other Incidentals Etc Complete. 145 Supplying And Fixing Roofing / Claddingwith 0.56Mm Thick Coloured Aluminium Trafford Sheet From Reputed Manufacturers Using Approved Size Self Tapping, Self Drilling Screws With Epdm Sealing Washers To Be Fixed On Crest Of Sheets With Minimum End Overlaps Of 150Mm And Appropriate Side Laps Including Cost And Conveyance Of All Materials, Labour For All Leads And Lifts, Other Incidentals Etc. Complete. ( Finished Area Of Roof Sheet Before Laying Ridges / Valleys / Crimped Sheets Will Only Be Measured And Considered For Payment. Overlaps Will Not Be Measured ) 146 Supplying And Fixing Roofing / Claddingwith 0.46Mm Thick Coloured Aluminium Trafford Sheet From Reputed Manufacturers Using Approved Size Self Tapping, Self Drilling Screws With Epdm Sealing Washers To Be Fixed On Crest Of Sheets With Minimum End Overlaps Of 150Mm And Appropriate Side Laps Including Cost And Conveyance Of All Materials Labour For All Leads And Lifts, Other Incidentalsetc. Complete. ( Finished Area Of Roof Sheet Before Laying Ridges / Valleys / Crimped Sheets Will Only Be Measured And Considered For Payment. Overlaps Will Not Be Measured ) 147 Roofing / Cladding With 2Mm Thick Fibre Trafford Sheet Of Approved Make Using Approved Size Self Tapping, Self Drilling Screws With Epdm Sealing Washers To Be Fixed On Crest Of Sheets With Minimum End Overlaps Of 150Mm And Appropriate Side Laps Including Cost And Conveyance Of All Materials, Labour For All Leads And Lifts, Other Incidentals Etc. Complete. Measurement Will Be Taken On Finished Flat Area Only. Overlaps Will Not Be Measured. 148 Supplying And Fixing Roofing With Powder Coated Tile Profile Aluminium Sheet Of Appropriate Thickness Of 0.50Mm Thk Using Approved Size Self Tapping, Self Drilling Screws With Sealing Washers To Be Fixed On Crest Of Roofing Sheets With Minimum End Overlaps Of 150Mmand Appropriate Side Laps Including Cost And Conveyance Of All Materials Labour, All Leads And Lifts, Other Incidentals Etc.Complete. 149 Roofing / Cladding Of Buildings At All Heights With 0.50 Mm Thk Galvalum Trafford Sheet With An Overlap Of 150Mm At Ends & Two Corrugation / Manufacturer"S Directions At Sides.Fixing With Self Drilling Screws With Sealing Washers, Including Cost And Conveyance Of All Materials Labour Etc. Complete 150 Roofing / Cladding Of Buildings At All Heights With 0.60 Mm Thk Coloured Galvalum Trafford Sheet With An Overlap Of 150Mm At Ends & Two Corrugation / Manufacturer"S Directions At Sides.Fixing With Self Drilling Screws With Sealing Washers, Plain Washers And Bitumen Washers Including Cost And Conveyance Of All Materials Labour Etc. Complete 151 Providing And Fixing / Replacing G.I. Ridge Capping Valley Gutters 22G, 450Mm Wide Including Cost And Conveyance Of All Materials Cost Of Self Drilling Screws With Sealing Washers With A Minimum Overlap Of 150Mm At Ends, Labour For All Leads And Lifts Up To A Height Of5metres Etc. Complete. 152 Providing And Fixing / Replacing Aluminium Sheet Ridge Capping Valley Gutters 22G, 450Mm Wide Including Cost And Conveyance Of All Materials Self Drilling Screws With Sealing Washers, With A Minimum Overlap Of 150Mm At Ends, Labourfor All Leads And Lifts Up To A Height Of 5Metres Etc. Complete. 153 Supplying And Fixing Roofing / Cladding With 6Mm Thick Or Nearest Available Thickness Solid Poly Carbonate Sheet Of Approved Quality And Colour, Fixing Using Ms Sections And Rubber Beading Of 50Mm Wide Or Nearest Size, Aluminium Sections At Sides Using Self Drilling Non-Corrosive Screws, Including Cost And Conveyance Of All Materials Labour For All Leads And Lifts Up To Aheight Of 5 Meters, Other Incidentalsetc Complete ( Ms Sections Will Be Measured In Relevant Item ) 154 Providing And Applying Fibre Reinforced Elastomeric Liquid Water Proofing Membrane With Resilient Acrylic Polymers Having Sun Reflectivity Index ( Sri ) Of 105 On Top Of Concrete Roof In Three Coats @10.76 Litre / 10 Sqm. One Coat Of Self-Priming Of Elastomeric Waterproofing Liquid ( Dilution With Water In The Ratio Of 3:1 ) And Two Coats Of Undiluted Elastomeric Waterproofing Liquid ( Dry Film Thickness Of Complete Application / System Not Less Than 500 Microns ) . The Operation Shall Be Carried Out After Scrapping And Properly Cleaning The Surface To Remove Loose Particles With Wire Brushes, Complete In All Respect As Per The Direction Of Engineer-In-Charge 155 Supplying And Applying Crack "X" Or Equivalent Materialalong Walls On All Heights Includingcost And Conveyance Of All Materials, Labour Etc. Complete. ( The Rate Is Inclusive Of Making Grove Up To A Maximum Width Of 20Mm ) 156 Plastering The Gap On Walls Between The Joints Of Rcc Roof And Parapet After Taking "V" Cut With Cm 1:3, 20Mm Thick Including Cost And Conveyance Of All Materialslabour Etc. Complete. 157 Cleaning The Rcc / Weather Proofing Surface ( Including Rain Water Pipes / Down Water Pipes ) By Removing All Wild Growths And Disposing The Debris Within Initial Lead Of 150M Etc. Complete ( Where Actual Area Is Not Possible To Measure, Labour Will Be Paidas Per The Relevant Item. ) 158 Plastering With C.Mforfloated Hard And Trowelled Smooth Including Cost And Conveyance Of All Materials, Labour, Curing Etc.Complete As Directed By The Engineer-In- Charge But Excluding Cost Of Cement. 159 1:4, 12Mm Thk. 160 1:4, 15Mm Thk. 161 1:3, 20Mm Thk. 162 Plastering To The Underside Of Rcc Slab With Cement Mortar 1:3, 6Mm Thick Including Hacking The Location, Floated Hard And Trowelled Smooth, Including Cost And Conveyance Of All Materials Labour, Other Incidentals Curing Etc. Complete But Excluding Cost Of Cement. 163 Neat Cement Punning / Flushing Coat Over The Plastered Surface Including Cost And Conveyance Of All Materials, Labour, Other Incidentals, Curing Etc.Complete But Excluding Cost Of Cement. 164 Providing Chicken Mesh And Clamping Over The Concrete With Sufficient Overlapping Including Cost And Conveyance Of All Materials Labour, All Other Incidentals Etc. Complete 165 Providing And Applying White Cement Based Putty Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete 166 Painting With Primer Of Approved Premium Quality And Shade Afterrubbing And Cleaning The Surface Including Cost And Conveyance Of All Materialslabour, Scaffolding Other Incidentals, Curing ( Wherever Required ) Etc.Complete. 167 One Coat Cement Primer On Plastered Surface 168 One Coat Zinc Chromite / Iron Primer 169 One Coat Zinc Chromite / Ironprimer 170 One Coat Wood Primer 171 Painting With Ready Mixed Plastic Emulsion Paint Of Approved Premium Quality And Colour After Rubbing And Cleaning The Surface Using Wire Brush, Sand Paper Etc. Wherever Required Including Cost And Conveyance Of All Materials Labour, Scaffolding Other Incidentalsetc. Complete. 172 Two Coats On New Surface 173 Onecoats On Old Surface 174 Two Coats On Old Surface 175 Painting With Ready Mixed Luxury Emulsion Paint Of Approved Quality And Colour After Rubbing And Cleaning The Surface Using Wire Brush, Sand Paper Etc. Wherever Required Including Cost And Conveyance Of All Materials Labour, Scaffolding Other Incidentalsetc. Complete. 176 Onecoats On Old Surface 177 Two Coats On Old Surface 178 Painting With Exterior Quality Acrylic Emulsion Paint Ofapproved Premium Quality And Colour After Rubbing And Cleaning The Surface Using Wire Brush, Sand Paper Etc. Including Cost And Conveyance Of All Materials Labour, Scaffolding Other Incidentals Etc. Complete. 179 Two Coats On New Surface 180 Onecoats On Old Surface 181 Two Coats On Old Surface 182 Painting On Iron Or Wood Surface With Synthetic Enamel Paint Of Approved Premium Quality And Colour After Rubbing And Cleaning The Surface Using Wire Brush, Sand Paper Etc. Wherever Required Including Cost And Conveyance Of All Materials Labour, Scaffolding Other Incidentals Etc. Complete. 183 One Coats On New Surface 184 Two Coats On New Surface 185 One Or More Coat On Old Surface 186 Two Coats On Old Surface 187 Painting On Iron Or Wood Surface With Synthetic Enamel Paint Of Approved Premium Quality And Colour After Rubbing And Cleaning The Surface Using Wire Brush, Sand Paper Etc. Wherever Required Including Cost And Conveyance Of All Materials Labour, Scaffolding Other Incidentals Etc. Complete. 188 One Coats On New Surface 189 Two Coats On New Surface 190 One Coat On Old Surface 191 Two Coats On Old Surface 192 Painting With Aluminium Paint Of Approved Premium Quality After Scraping , Wire Brushing, Rubbing And Cleaning The Surface Using Required Equipments, Tool Brush, Emirypaper Etc Wherever Required Including Cost And Conveyance Of All Materials Labour, Other Incidentals Etc. Complete. 193 Onecoat On New / Old Surface 194 Two Coat On New / Old Surface 195 One Coat On Iron Items 196 Varnishing With Approved Quality Varnish After Rubbing And Cleaning The Surface Including Cost, Conveyance, Labour, Other Incidentals Etc Complete. 197 Using Copal Varnish One Coat On Old Surface 198 Using Clear Varnish One Coat On Old Surface 199 Finishing The Wooden Surface With Touch Wood Finish With Approved Premium Qualityafter Cleaning The Surface Including Cost And Conveyance Of All Materials, Labour Etc. Complete. 200 One Coat 201 Two Coat 202 White Cement Washing After Cleaning The Surface Including Cost And Conveyance Of All Materials Labour, Other Incidentals Etc Complete. 203 Painting Guard Lines On The Floors Using Synthetic Enamel Paint Of Approved Quality And Colour In Two Coats Including Cost And Conveyance Of All Materials Labour Chargesetc. Complete. 204 One Coats On New / Old Surface 205 Two Coats On New / Old Surface 206 Painting Road Surface Marking With Adequate Nos Of Coats To Give Uniform Finish With Ready Mixed Road Marking Paint Conforming To Is : 164, On Bituminous Surface In Approved Colour, Including Cleaning The Surface Of All Dirt, Scales, Oil, Grease And Foreign Material Etc. Complete. 207 New Work ( Two Coats ) 208 Old Work ( One Coat ) 209 Washing Andcleaning Surface Ofall Types Of Buildings Such As Industrial / Office / Residential / Compound Wall Etc By Washing With Water Using Hoses, Brushes , Brooms Etc At All Heights Including All Labour Removing Off All Dirt, Wild Growth Etc Disposing The Debris Within A Lead Of 150M Etc Complete. 210 Providing And Fixing In Position Pvc False Ceiling Upto 5M Height To Line And Levelwith Following Specifications:Ceiling- Pvc Mouldedmulti Wall Section, 360Cmx30cmx8mm Or Nearest Available Size ( Jeno From Syntex Or Equivalent ) Of Approved Colour Fixed With Self Tapping Screws To Aluminium Section.Inter Section-Aluminium Channel Section Of Size 38Mm X25mmx1.5Mm Or Nearest Available Size At 600Mm Centre To Centre Connected With Supporting Inter Section To Existing Purlin / Truss In Line And Levelsupporting Inter Section -20Mmx20mmx 0.60 Mm Or Nearest Available Size Gi Angle Connecting Aluminium Section To Purlin / Truss. Joint Profile -Pvc Joint Profile 20Mm Or Nearest Available Size At 180Cm Centre To Centre Fixed With Self Tapping Screws.Cornice - Pvc Cornice 25Mm Or Nearest Available Size Fixed Along Walls Using Screws . The Rates Including Cost Of All Materials And Labourother Incidentals Etc Complete.All Are Directed By The Engineer-In-Charge. ( Laborrate Includes Providing Necessary Openings Forelectrical Works. Mesurements Will Be Taken Laterally ) 211 Laying Ceiling Type Departmentally Issued Calcium Silicate Ceilingsto The Existing Aluminum Frame Work In All Floors Of The Building At Places Wherever Requiredincluding And Conveyance Of All Materials Labour Charges, Scaffolding And Other Sundries Incidentalsetc Complete. 212 Supplying & Replacing Ceiling Of Calcium Silicate Ceilings Of Size 595X595x15mm Tegular Edged To The Existing Aluminum Frame Work In All Floors Of The Building At Places Wherever Requiredincluding And Conveyance Of All Materials Labour Charges, Scaffolding And Other Sundries Incidentals Etc Complete. 213 Grid Ceiling Providing & Installing To True Line And Level Commercial Type Suspended Modular Ceiling Suspended Using Suitable Support System At Every 1200Mm Intervals. Grids Width: 24 Mm Finished In Approved Shade. The Main Runners & Cross Tees To Have "Stab" Installation System Made Of Corrosion Protected Galvanized Steel Or Approved Equivalent. Ceiling Tiles Are Tegular Edgedcalcium Silicate Ceiling Tile Of Size 595X595x0.70Mmtk. Gi Sections For Use As Main Runners Are 24 X 38 X 0.30 Mm, Cross Tees Are 24 X 25 X 0.30 Mm, And Wall Angles Are 24 X 24 X 0.40 Mm And Gi Supports ( Gi Sections Can Be Changed To Higher Sections Having Same Or Greater Thickness To Suit The Site Conditions ) . False Ceiling Will Be Measured On Horizontal Plane Only. Horizontal Plane Measurements Are To Be Inclusive Of Vertical Drops, Edge Mouldings, Fascias Etc.. Rate Quoted To Include Cost And Conveyance Of All Materials, All Cut Outs Required For Light Fixtures, Labour Cost, Hire Charges Of Equipments, Consumables, Scaffolding Cost, Other Incidentals Etc. Complete. 214 Providing & Installing To True Line And Level Commercial Type Suspended Pvc Modular Ceiling Suspended Using Suitable Support System At Every 1200Mm Intervals. Grids Width: 24 Mm Finished In Approved Shade. The Main Runners & Cross Tees To Have "Stab" Installation System Made Of Corrosion Protected Galvanized Steel Or Approved Equivalent. Ceiling Tiles Are Tegular Edged Poly Vinyl Chloride Ceiling Tile Of Size 595X595x0.7Mmtk. Gi Sections For Use As Main Runners Are 24 X 38 X 0.3 Mm, Cross Tees Are 24 X 25 X 0.3 Mm, And Wall Angles Are 24 X 24 X 0.4 Mm And Gi Supports ( Gi Sections Can Be Changed To Higher Sections Having Same Or Greater Thickness To Suit The Site Conditions ) . False Ceiling Will Be Measured On Horizontal Plane Only. Horizontal Plane Measurements Are To Be Inclusive Of Vertical Drops, Edge Mouldings, Fascias Etc.. Rate Quoted To Include Cost And Conveyance Of All Materials, All Cut Outs Required For Light Fixtures, Labour Cost, Hire Charges Of Equipments, Consumables, Scaffolding Cost, Other Incidentals Etc. Complete. 215 Providing And Fixing Self Supporting Galvalume Sheet Cladding Panel, Sandwiched Withpuf Panels Of60mm Thicknessmanufactured On Continuous Line Comprising 0.60Mm Tct Or Nearestcolour Coated Galvalume Sheets On Both Sideswith Light Cutting Grooves To Improve Strength And Aesthetics . The Void Between The Sheets Will Be Cfc Free Polyurethane Foam. The Thickness Of Panel Shall Form 60 Mm Outer To Outer Excluding The Profile. The Length Of The Panel Shall Be To Suit The Site Length Requirement. The Panel To Be Erected Vertically Using C Flashing Of Size 60Mm X 60 Mm X 60 Mm X 0.6 Mm Thickness Or Nearest Size At Topbottom And Sides, C Flashing Fixed On To Floor / Nearest Structural Members Steel Screws Plugged In To Fibre Block Plug Etc As Directed By The Engineer - In - Charge. 216 Providing And Fixing Stainless Steel ( Grade 304 ) Railing Made Of Hollow Tubes, Channel, Plates Etc., Including, Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I / C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On Top Of The Floor Or The Side Of The Waist Slab With Suitable Arrangement As Per Approval Of Engineer – In Charge. ( For Payment Purpose, Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc. ) 217 Supplying & Fixing 4Mm Thick Metalic Aluminum Composite Panel Cladding Of Make ‘Eurobond / 4Mann / Aludecor’ Or Equvalent In Perfect Line & Plumb, Fire Resistance Having Rating Of 2 Hrs. Colors & Shade With Metallic Finish. Aluminum Composite Panel Shall Onsist Of Two 0.50Mm Aluminum Sheets ( Alu.Alloy-1100 H18 ) And 3Mm Antitoxic Polyethylene Core. Aluminum Foil Pvdf Coated ( Pvdf Coating 30 To 32 Micron ) . Frame Made From 50 X 25 X 1.2Mm Thick Hindalco Aluminum Channel And Fixed To The Beam / Slab And Wall With Aluminum Plated Screws, Fasteners And Aluminum Brackets Wherever Required. Aluminum Composite Panel Bended At Edges To Make The Tray And It Fixed With 25X25mm / 12 X12 Mmaluminum Cleats To The Frame With Hilty / Crome Brand Sheet Metal Cadmium Plated Screws And Filling The Gap With Polyethylene 12Mm Dia Backer Rod And Sealing The Gap Joints With Dow Croning 789 Silicon Weather Sealant. The Framework Should Be Designed As Per The Relevant Codes And Should Be Able To With Stand Thermal & Wind Loads. Rate Quoted To Include Cost And Conveyance Of All Materials, Labour Cost, Hire Charges Of Equipments, Consumables, Other Incidentals Etc. Complete 218 Providing & Fixing In Position Manually Operated Roller Blinds Of Approved Shade And Colour With Good Quality Fabric Including Cost And Conveyance Of All Materials All Labour, Other Incidentalsetc. Complete. 219 Providing & Fixing In Position Manually Operated Vertical Blinds Of Approved Shade And Colour With Good Quality Fabric Including Cost And Conveyance Of All Materials All Labour, Other Incidentalsetc. Complete. 220 Fabrication Of All Types Of Structural Steel Works By Straightening, Cutting & Welding Using All Types Of Steel Sections Plates, Flats Of Any Size And Weight As Per Approved Drawing Or As Instructed, Erecting In Positionto Line And Level By Welding / Bolting Embedding In Concrete Including Hire Charges For Toolsand Plants, Cost Of Electrodes, Other Incidentalsetc. Complete All As Directed By The Engineer-In-Charge. 221 Using Steel Procured By The Contractor 222 Using Departmental Steel 223 Supplying, Fabricating And Erectingof Mild Steel Tubular ( Round, Square And Rectangular Hollow Tubes ) Of Any Size And Weight By Straightening, Cutting And Welding Usingas Per Approved Drawing Or As Instructed, Erecting In Position To Line And Level By Welding / Bolting Embedding In Concrete Including Applying One Coat Of Zinc Chromate Primer & Two Coats Synthetic Enamel Paint, Hire Charges For Tools And Plants, Cost Of Electrodes, Wastage, Other Incidentals Etc. Complete All As Directed By The Engineer-In- Charge. 224 Providing And Fixing Reinforcement Dowel Bars In Existing Reinforced Concrete Member Using Chemical ( Resin ) Anchor Systems Such As Hst-165 Of Hilti Make Or Equivalent, Including Drilling Holes Of Required Diameter And Depth, Injecting The Chemical By Dispenser, Cost Of Chemical , Scaffolding, All Toolsand Tackles, Etc Complete As Per Manufacturer"S Specifications.The Quantity Of Rebars Will Be Payable Under Relevant Item . 225 Drilling Holes For Y 20 Bar - Hole 25 Mm Dia X 200 Deep Min., Fixing Of Rebars And Injection Of Chemical Resin. 226 Drilling Holes For Y 16 Bar - Hole 20 Mm Dia X 160 Deep Min., Fixing Of Rebars And Injection Of Chemical Resin. 227 Drilling Holes For Y 12 Bar - Hole 16 Mm Dia X 120 Deep Min., Fixing Of Rebars And Injection Of Chemical Resin. 228 Drilling Holes For Y 10 Bar - Hole 14 Mm Dia X 100 Deep Min., Fixing Of Rebars And Injection Of Chemical Resin. 229 Fixing 10-20Mm Dia Departmentally Issued Anchor Boltsafter Drilling Suitable Holes In Various Depth As Per The Requirements, Placing The Boltto Correct Line And Level. Rate Quoted Should Beinclusive Of Hire Charges Of Drilling Machine, Labour, Etc Complete All As Directed By The Engineer-In-Charge. 230 Supplying& Fixingfollwing Dia Approved Brand Anchor Boltsafter Drilling Suitable Holes In Various Depth As Per The Requirements, Placing The Boltto Correct Line And Level. Rate Quoted Should Beinclusive Of Hire Charges Of Drilling Machine, Labour, Etc Complete All As Directed By The Engineer-In-Charge. 231 M12x145 Mm Size 232 M16x137 Mm Size 233 Providing And Fixing In Position Powder Coated Aluminium Single Leaf Door With Outer Frames Of Size 63.5Mm X 38.1Mm X 2Mm Or Nearest Available Size All Round, Vertical Styles & Top Horizontal Member Of Size 50Mm X 44.5Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 5Mm Thick Plain Glass Fixed With Epdm Beading Of 10 Mm Tk Between Panel And Aluminium Frame On All Faces And Glass Fixed At A Height Of 1M From The Top. Bottom Half With4 Mm Thk.Or Nearest Available Thickness Hylam Boardof Height 1.2M From Bottom Frameincluding Cost And Labour Charges For All Materialsand Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 2 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 1No Of Door Closer Of Approved Make. 234 Providing And Fixing In Position Powder Coated Aluminium Single Leaf Door With Outer Frames Of Size 63.5Mm X 38.1Mm X 2Mm Or Nearest Available Size All Round, Vertical Styles & Top Horizontal Member Of Size 50Mm X 44.50Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 5Mm Thick Plain Glass Fixed With Epdm Beading Between Panel And Aluminium Frame On All Faces And Glass Fixed At A Height Of 1M From The Top. Bottom Half With8mm Thick Particle Board Of Height 1.2M From Bottom Frameincluding Cost And Labour Charges For All Materialsand Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 2 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 1No Of Door Closer Of Approved Make. 235 Providing And Fixing In Position Powder Coated Aluminium Single Leaf Door With Outer Frames Of Size 63.5Mm X 38.1Mm X 2Mm Or Nearest Available Size All Round, Vertical Styles & Top Horizontal Member Of Size 50Mm X 44.50Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 5Mm Thick Plain Glass Fixed With Epdm Beading Between Panel And Aluminium Frame On All Faces And Glass Fixed At A Height Of 1M From The Top. Bottom Half With 4 Mm Thk.Or Nearest Available Thickness Chequred Aluminium Sheetof Height 1.2M From Bottom Frameincluding Cost And Labour Charges For All Materialsand Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 2 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 1No Of Door Closer Of Approved Make. 236 Providing And Fixing In Position Glass Door Using 12Mm Thk Toughened Glass With All Edges Rounded And Polished, Fixing Using Coloured Powder Coated Twin Style Aluminium Section Of Size 90X50x5 At Top And Bottom, Fixing Providing Floor Springs, Pivots, Both Side Ss Handles, Locking Arrangement Including Cost And Conveyance Of All Materialscost Of Spring Hinges All Labour Etc.Complete. 237 Providing And Fixing 12Mm Frameless Toughened Openable Pivot Glass Door With Single Panel Along The Glass Partition With Suitable Ss Handle, Floor Spring, And Fixing The Glass Panels Firmly Using Ss 304 Grade Approved Make Accessories, Polishing All Visible Edges Of The Glass Perfectly, And Providing Lock Arrangement. Providing Cut Out & Holes On Glass Wherever Required For The Fittings, Lock, Floor Spring Etc Including Cost & Conveyance Of All Materials, Installation Charges Etc Complete. 238 Providing And Fixing In Position Powder Coated Aluminium Single Leaf Door With Outer Frames Of Size 63.5Mm X 38.1Mm X 2Mm Or Nearest Available Size All Round, Vertical Styles & Top Horizontal Member Of Size 50Mm X 44.50Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 4Mm Thk.Or Nearest Available Thickness Hylam Board Fixed With Epdm Beading Between Panel And Aluminium Frame On All Faces And The Powder Coated Aluminium Divider Section Fixed At The Mid Height Including Cost And Labour Charges For All Materialsand Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 2 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 1No Of Door Closer Of Approved Make. 239 Providing And Fixing In Position Powder Coated Aluminium Single Leaf Door With Outer Frames Of Size 63.5Mm X 38.1Mm X 2Mm Or Nearest Available Size All Round, Vertical Styles & Top Horizontal Member Of Size 50Mm X 44.50Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 8Mm Thick Particle Board Fixed With Epdm Beading Between Panel And Aluminium Frame On All Faces And The Powder Coated Aluminium Divider Section Fixed At The Mid Height Including Cost And Labour Charges For All Materials And Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 2 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 1No Of Door Closer Of Approved Make. 240 Providing And Fixing In Position Powder Coated Aluminium Single Leaf Door Without Outer Frames Vertical Styles & Top Horizontal Member Of Size 50Mm X 44.50Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 5Mm Thick Plain Glass Fixed With Epdm Beading Between Panel And Aluminium Frame On All Faces And Glass Fixed At A Height Of 1M From The Top. Bottom Half With4 Mm Thk.Or Nearest Available Thickness Hylam Boardof Height 1.2M From Bottom Frameincluding Cost And Labour Charges For All Materialsand Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 2 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 1No Of Door Closer Of Approved Make. 241 Providing And Fixing In Position Powder Coated Aluminium Single Leaf Door Without Outer Frames Vertical Styles & Top Horizontal Member Of Size 50Mm X 44.50Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 5Mm Thick Plain Glass Fixed With Epdm Beading Between Panel And Aluminium Frame On All Faces And Glass Fixed At A Height Of 1M From The Top. Bottom Half With8mm Thick Particle Board Of Height 1.2M From Bottom Frameincluding Cost And Labour Charges For All Materialsand Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 2 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 1No Of Door Closer Of Approved Make. 242 Providing And Fixing In Position Powder Coated Aluminium Double Leaf Door With Outer Frames Of Size 63.5Mm X 38.1Mm X 2Mm Or Nearest Available Size All Round, Vertical Styles & Top Horizontal Member Of Size 47Mm X 44Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 5Mm Thick Plain Glass Fixed With Epdm Beading Between Panel And Aluminium Frame On All Faces And Glass Fixed At A Height Of 1M From The Top. Bottom Half With4mm Thk.Or Nearest Available Thickness Hylam Boardof Height 1.2M From Bottom Frameincluding Cost And Labour Charges For All Materialsand Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 1 No Tower Bolt, 4 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 2 Nos Of Door Closer Of Approved Make 243 Providing And Fixing In Position Powder Coated Aluminium Double Leaf Door With Outer Frames Of Size 63.5Mm X 38.1Mm X 2Mm Or Nearest Available Size All Round, Vertical Styles & Top Horizontal Member Of Size 50Mm X 45Mm X 2Mm, Bottom Horizontal Member Of Size 100Mm X 45Mm X 2Mm Of Superior Quality Powder Coated Aluminium Sections Panelled With 5Mm Thick Plain Glass Fixed With Epdm Beading Between Panel And Aluminium Frame On All Faces And Glass Fixed At A Height Of 1M From The Top. Bottom Half With8mm Thick Particle Boardof Height 1.2M From Bottom Frameincluding Cost And Labour Charges For All Materialsand Fixing Etc., Complete. The Door Is To Be Provided With 1No. Door Lock, 1 No Tower Bolt, 4 Nos Anodized Aluminium Handles 150Mm Or Nearest Size One On Each Face Ofdoor Shutter, 2 Nos Of Door Closer Of Approved Make. 244 Labour For Servicing And Repairs To Glazed Aluminium Doors / Windows, Including Replacing Parts Such As Tower Bolt, Hinges, Sliding Window Lock, Rubber Beading Etc. Complete As Directed By The Engineer- In - Charge. ( Cost Of Parts Will Be Paid Separately ) 245 Providing And Fixing In Position Louvre Type Ventilator Using Powder Coated Aluminium Frames Of Approved Quality And Shade Using 63.5X38.1X2mm Size Or Nearest Available Sections, Louvres Made With 4Mm Thk Glass, And Providing And Fixing Mosquito Proof Nets Made Of Ss Net To The Ventilator Frames Using Aluminium Beading, Screws, Nailsetc Including Cost And Conveyance Of All Materialsall Labour Etc.Complete As Directed By The Engineer In Charge. 246 Providing And Fixing In Position Louvre Type Ventilator Using Powder Coated Aluminium Frames Of Approved Quality And Shade Using 63.5X38.1X2mm Size Or Nearest Available Sections, Louvres Made With 4Mm Thk Glass Fixing To The Ventilator Frames Using Aluminium Beading, Screws, Etc Including Cost And Conveyance Of All Materials All Labour Etc.Complete As Directed By The Engineer In Charge. 247 Providing And Fixing Aluminium Openable Ventilatorusing Powder Coated Aluminium Frames Of Approved Quality And Shade Using 63.5X 38.1X 2Mmsizeand Shutter Frame50x20x1.5Mm Or Nearest Available Sections Aluminium Sections & 4Mm Thk.Plain Glass , Epdm Beading, Locking Arrangements Including Cost And Conveyance Of All Materials Labour, All Other Incidentals Etc.Complete. 248 Providing And Fixing In Position Fully Glazedaluminium Super Sliding Window / Ventilator With Lock System, Powder Coated Aluminium Heavy Section With Sliding Shutters Using Following Sizes Or Nearest Available Size63.5 X 31.75 X 2Mm For Frames, 38.10 X19.5 X 2Mm For Shutter Interlock, Vertical And Horizontal And Plain Glass 4Mm Thickincluding All Fixtures Like Hinges, Locking Arrangements, Handles, Epdm Beadings Etc Including Cost And Conveyance Of All Materials Labour, Other Incidentals Etc. Complete. 249 Providing And Fixing In Position Openable Type Mosquito Proofwindow Using Powder Coated Aluminium Frames Of Approved Quality And Shade Using 25 X 25 X 1.5Mm Size Or Nearest Available Sectionsand Stainless Steel Net, Epdm Beading, Locking Arrangement, Screws, Nails Etc Including Cost And Conveyance Of All Materialsall Labour Etc.Complete As Directed By The Engineer In Charge. 250 Providing And Fixing In Position Openable Type Mosquito Proofdoor Using Powder Coated Aluminium Frames Of Approved Quality And Shade Using 25 X 25 X 1.5Mm Size Or Nearest Available Sectionsand Stainless Steel Net, Epdm Beading, Locking Arrangement, Screws, Nailsetc Including Cost And Conveyance Of All Materialsall Labour Etc.Complete As Directed By The Engineer In Charge. 251 Providing And Fixing In Position Fixed Type Mosquito Proofventilator / Exhaust Opening Using Powder Coated Aluminium Frames Of Approved Quality And Shade Using 25 X 25 X 1.5Mm Size Or Nearest Available Sectionsand Stainless Steel Net, Epdm Beading, Locking Arrangement, Screws, Nailsetc Including Cost And Conveyance Of All Materialsall Labour Etc.Complete As Directed By The Engineer In Charge. 252 Providing And Fixing In Position Aluminium Partition Using 63.5X38.1X2mm Thk.Or Nearest Available Size Powder Coated Aluminium Rectangular Sections Of Approved Quality And Shade Panelling With 4 Mm Thk.Or Nearest Available Thickness Hylam Board Fixed With Necessary Epdm Beading Including Cost And Conveyance Of All Materials Labour Etc.Complete. 253 Providing And Fixing In Position Aluminium Partition Using 63.5X38.10X2mm Thk.Or Nearest Available Size Powder Coated Aluminium Rectangular Sections Of Approved Quality And Shade Panelling With 8 Mm Thick Particle Board Fixed With Necessary Epdm Beading Including Cost And Conveyance Of All Materials Labour Etc.Complete. 254 Providing And Fixing In Position Half Glazed Partition Using 63.5X38.1X2mm Thk.Or Nearest Available Size Powder Coated Aluminium Rectangular Sections Of Approved Quality And Shade Panelling With 4 Mm Thk.Or Nearest Available Thickness Hylam Boardand 5Mm Thk Plain Glass Fixed With Necessary Epdm Beading Including Cost And Conveyance Of All Materials Labour Etc.Complete. 255 Providing And Fixing In Position Half Glazed Partition Using 63.5X38.10X2mm Thk.Or Nearest Available Size Powder Coated Aluminium Rectangular Sections Of Approved Quality And Shade Panelling With 8 Mm Thk.By Particle Board And 5Mm Thk Plain Glass Fixed With Necessary Epdm Beading Including Cost And Conveyance Of All Materials Labour Etc.Complete. 256 Providing And Fixing In Position Fully Glazed Partition Using 63.5X38.1X2mm Thk. Or Nearest Available Size Powder Coated Aluminium Rectangular Sections Of Approved Quality And Shade Panelling With 5Mm Thk Plain Glass Fixed With Necessary Epdm Beading Including Cost And Conveyance Of All Materials Labour Etc.Complete. 257 Providing Good Quality Epdm Beading 25X32mm To Door / Window To Make Air Tight By Fixing It Using Suitable Quality Binding Material Including All Cost And Conveyance, Labour Etc. Complete 258 Supplying And Pasting Sun Control Film To The Shutter Of Glazed Doors / Windows / Partitions After Cutting To The Required Size Including Cost And Conveyance Of All Materials Labour Other Sundries Etc. Complete All As Directed By The Engineer- In- Charge. 259 Check / Strips Frosted 260 Reflective Type / Dark Film 261 Frosted Film 262 Dismantling Concrete In Brick-Jelly Mortar Provided On Roof Top Of Office Building And Clearing Away Debris Including Cost Of Labour, Other Incidentalsand Conveyance Of Materialsupto A Distance Of 3 Km Etc. Complete As Directed By The Engineer-In-Charge. 263 Dismantling, Clearing Away And Carefully Stacking Materials Useful For Reuse For Any Thickness Of Wall Of Brick, Laterite Or Rubble In Cement Mortar Including Disposal Of Debris Within Csl Premises Etc Complete. 264 Dismantling And Removing Doors With Or Without Ventilators Including Removal Of Shutters, Hinges, Holdfasts And All Other Fittings And Stacking Materials Within Csl Premises Etc Complete. 265 Demolishing R.C.C / P.C.C Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within Csl Premises As Per Direction Of Engineer-In- Charge, Including All Labour, Other Incidentals, Hire For Toolsand Plants Etc. Complete. 266 Demolishing And Removing Cement Plaster Of Any Thickness And Disposal Of Debris Within Csl Premises Etc. Complete. 267 Dismantling And Removing Tiles Setincement Mortar In Floor Including Cleaning And Stacking, Serviceable Materials And Removing The Debris Within Within Csl Premises Etc. Complete. 268 Dismantling, Removing And Loweringwooden Frame Work , Wooden Partition, Planked Sheeting , Ceiling Planks, Ac / Gi Sheets For Roofing, Cladding, Ceiling, Wooden Partition Stacking Serviceable Materials& Removing The Unserviceable Material Within Csl Premises Etc. Complete. 269 Dismantlingroofing Sheetincluding Ridges, Hips, Valleys And Gutters Etc., Conveying And Stacking The Dismantled Materialsat The Places Pointed Out By The Engineer-In-Charge. 270 Dismantling Steel Work In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Conveying And Stacking The Dismantled Materials At The Places Pointed Out By The Engineer-In-Charge. 271 Dismantling Pvc / Grid Ceiling Including Suppports Up To Height Of 5Metres Including Conveying And Stacking The Dismantled Materials At The Places Pointed Out By The Engineer-In-Charge. 272 Dismantlingand Removing Manglore Pattern Tiles Over Roof Including Ridges, Hips, Valley Sheets, Wind Tiles, Bordering Etc And Stacking Serviceable Materials Within A Lead Of 150M And Depositing The Debris Within Csl Premises Etc. Complete But Excluding Removal Of Timber Which Will Be Paid Separately. 273 Supplying, Cutting, Threading, Laying And Jointing Rigid Pvc Pipesincluding All Specials Such As Tees, Bends, Elbows, Reducers, Plugs Etc. Through Walls / Concrete, Making Good The Wall / Concrete After Fixing Using Cm 1:3, Taking Connection From The Existing Water Supply Including Cost And Conveyance Of All Materials, Labour, Testing The Line Before Embedding Etc. Complete Excluding Specials Of 100 Mm Dia Pipes. 274 20Mm Dia Pvc Pipe ( 10Kg / Cm2 ) 275 25Mm Dia ( 10Kg / Cm2 ) 276 32Mm Dia ( 10Kg / Cm2 ) 277 50Mm Dia ( 10Kg / Cm2 ) 278 63Mm Dia ( 6Kg / Cm2 ) 279 75Mm Dia ( 6Kg / Cm2 ) 280 110Mm Dia -Excluding Specials- ( 4Kg / Cm2 ) 281 160Mm Dia-Excluding Specials- ( 4Kg / Cm2 ) 282 Supplying And Fixing White European Type Water Closetof Approved Quality At All Floors With Approved Quality High Level / Low Level Pvc Flushing Cistern 10 L Or Nearest Capacity, At All Floors Including Cost Of 15Mm Brass Cp Angle Cock, Seat Cover, 15Mm / 20Mm P.V.C Connection, Cost And Conveyance Of All Materials, Labour, Other Incidental Charges Etc. As Directed By The Engineer On Charge. Etc. Complete But Excluding Cost Of Cement. 283 Supplying And Fixing580mm Coloured Orissa Pattern Water Closetor Nearest Available Size Of Approved Quality With Pvc Flush Tank Of 10 L Capacity At All Floors Including Cost Of 15Mm Brass Cp Angle Cock, Seat Cover, 15Mm / 20Mm P.V.C Connection, Cost And Conveyance Of All Materials, Labour, Other Incidental Charges Etc. As Directed By The Engineer On Charge. Etc. Complete But Excluding Cost Of Cement. 284 Supplying And Fixing Approved Quality And Shade 550Mmx 400Mm Or Nearest Size Wash Hand Basins Of Glazed Earthernware, With Necessary Brackets, One Central Single Lever Quarter Turn Pillar Cock With Foam Flow, One Central 15Mm Pvc Connection, 1 No 15 Mm Cp Stop Cock , Cp Brass Waste Of Standard Patterns, 32Mm Pvc Waste Pipe, Cutting And Making Good The Wall S, Painting The Brackets Two Coats Including Cost And Conveyance Of All Materials Labour, Other Incidentalsetc. Complete. 285 Supplying And Fixing Following Water Supply And Sanitary Fittings In Position Of Approved Quality, All Specialsfor Connecting ( Elbows / Bend / Nipples Etc. ) , Including Cost And Conveyance Of All Material S. All Labour For Fitting, All Other Incidental Charges Etc.Complete All As Directed By The Engineer-In-Charge. 286 Cp Two Way Tap 287 Cp Health Faucets 288 Cp Disc Type Quarter Turn Tap ( Form Flow ) 289 Cp Coat Hook 290 600Mm Or Nearest Size Cp Towel Rod 291 Ss Gratings With Cup Of 100 Mm Size 292 Ss Gratings With Cup Of 150 Mm Size 293 Cp Floor Trap ( Multi Trap ) 294 Cp Floor Trap ( Line Trap ) 295 110 Mm Pvc Vent Cowl 296 25 Mm Size Brass Ball Valve 297 40 Mm Size Brass Ball Valve 298 50 Mm Sizes Brass Ball Valve 299 110Mm Pvc Specials Likereducers / Bends / Door Bends Etc. 300 160Mm Pvc Specials Likereducers / Bends / Door Bends Etc. 301 Supplying And Fixing Pvc Gutter At The Eve Of Roof For Collecting Rain Water Including Necessary Elbow Drop, End Drop, Open Nosil, Jointer And Pathy Clamp For Holding Gutterfixing To Line And Level Cost And Conveyance Of All Materials Labour Etc. Complete. 302 Size Up To150mm 303 Size Up To 250Mm 304 Supplying And Fixing 220Mm Square Type Upvc Gutter At The Eve Of Roof For Collecting Rain Water Including Necessary Elbow Drop, End Drop, Open Nosil, Sq Jointer And Square Pathy Clamp For Holding Gutterfixing To Line And Level Cost And Conveyance Of All Materials Labour Etc. Complete. 305 Supplying And Transporting, Positioning Of The Following Capacity Ferrocement Septic Tank Of 3.50M3 Or Nearest Capacity Of Approved Quality After Excavating The Earth Upto Required Depth From Ground Level, Including Cost And Conveyance Of All Materials All Labour Etc. Complete As Per The Direction Of The Engineer-In-Charge. 306 Providing And Fixing Gi Chain Link Fabric Fencing Of Dia 4Mm Or Nearest Available Size Of Required Width In Mesh Size Of 50X50mmon M.S. Structurals Already Fixed Using Suitable Bolts And Nuts Includingcost Of Chain Link Fencing, Labour Etc Complete. ( M.S Structurals Measured And Paid Seperatly. ) 307 Providing And Fixingg.I. Wire Of Dia. 4 Mm, Pvc Coated Chain Link Fabric Fencing Of Dia 4Mm Or Nearest Available Size Of Required Width In Mesh Size Of 50X50mmon M.S. Structurals Already Fixed Using Suitable Bolts And Nuts Includingcost Of Chain Link Fencing, Labour Etc Complete. ( M.S Structurals Measured And Paid Seperatly. ) 308 Removing Damaged Single Barbed Wire Including Making Rollsand Stacking Within 50 Metres Lead. 309 Supplying And Fixing Gi Barbed Wire Two Strand No. 10-3.25Mm Or Nearest Available Size Fixing The Wire Through Hole Provided In Existing Posts Including Cost And Conveyance Of All Materials Labour, Transportation And Fixing Etc. Complete. 310 Supplying And Fixing In Position 450Mm Dia. Concertina Coil Made Of High Tensile Galvanised Steel Wire 2.4Mm Dia With 0.5Mm Thk Galvanised Razor Strips And 16G Galvanised Clip Coated With Bitumen Black Paint On Wall With Existing "Y" Angle. Each Coil Shall Be Streched To 6M Avg. Length And Having 50Nos Rounds Per 6 Metre Length And Tired With 9 Nos Horizontal Runner Wire Of Same Material And Type On Either Sideof "Y" Angle With 2.5Mm Dia. Gi Wire As Directed By Engineer In Charge And As Manufactures Specifications. ( Rate Shall Be Inclusive Of 9 Runner Wires Also ) 311 Supplying And Fixing Agro Net On The Existing Structure To The Required Height Including Cost And Conveyance Of All Material Labour Etc Complete. 312 Supplying Fabricating And Fixing Of Double Sided Informatory Retro Reflective Sign Board Using Super High Efficency Sticker Fixing With White Colour Bonded On To 2Mm Aluminium Sheet. The Board Shall Be Provided With Frame Made Out Ms Square Tube Of Section 25X25x2mm. It Shall Be Mounted On Vertical Post Made Out Of 50Nb Pipe Including Necessary Excavation For M20 Concreting / Revelling Etc. ( Excavation, Concrete, Ms Square Tube, Ms Pipe And Other Structural Works Are To Be Measured Seperatly ) And Cost Of All Material All Labour Other Incidental Etc Complete. 313 Supplying Fabricating And Fixing Of One Side Informatory Retro Reflective Sign Board Using Super High Efficency Sticker Fixing With White Colour Bonded On To 2Mm Aluminium Sheet. The Board Shall Be Provided With Frame Made Out Ms Square Tube Of Section 25X25x2mm. It Shall Be Mounted On Vertical Post Made Out Of 50Nb Pipe Including Necessary Excavation For M20 Concreting / Revelling Etc. ( Excavation, Concrete, Ms Square Tube, Ms Pipe And Other Structural Works Are To Be Measured Seperatly ) And Cost Of All Material All Labour Other Incidental Etc Complete. 314 Pressure Grouting In Concrete / Masonry Area Etc Using Modified Cement Slurry Added With Expansive Additive Of Approved Brands Like Sika, Fosroc, Pidilite, Etc After Fixing Up Of 12Mm Dia Pvc Nipple Etc At Points As Directed By The Engineer- In- Charge .The Ratio Of Propotioning Chemical To Cement Shall Be As Per Manufactures Recomendation. The Rate Shall Include The Cost And Conveyance Of All Materials, Hire Charges For Pressure Gun, All Labours And Material Excluding The Cost Of Cement. ( The Payment Shall Be Made On The Basis Of Actual Weight Of Approved Grout Injected. ) 315 Replacing The Damaged Modular Table Lock Arrangement Including Cost And Conveyance Of All Materials All Labour Etc Complete. ( Payment Is For Each Lock Arrangement ) 316 Supplying And Fixing Solid Wall Panels Of Thickness 75 Mm Or Nearest Made Out Of Two Fibre Reinforced Cement Sheets On Both Sides And Filled With Aereated Light Weight Concrete. The Panel To Be Erected Vertically Using Gichannel Of Size 34 Mm X 76 Mm X 34 Mm X 0.55 Mm Thickness At Top And 34 Mm X 76 Mm X 32 Mm X 0.55 Mm Thickness At Bottom. Channels Fixed On To Floor / Nearest Structural Members Using Steel Screws Plugged In To Fibre Block Plug Etc . The Self Supporting Wall Panels Shall Have Tongue And Groove Joints And The Panel Joints Should Be Finally Sealed With Silicone Sealant Of Approved Make To Make It Vapour Tight.The Rate Should Include Cost Of All Materials And Labour, Necessary Ironmongery, All Hardwares, Providing Openings For Aluminium Windows / Doors Etc. Panelling Will Be Measured On Vertical Plane ( Length And Height ) Only. All Opening For Door And Window Shall Be Deducted. 317 Carrying Out Miscellaneous Works By Arranging Various Categories Of Labour As Per The Direction Of The Engineer-In-Charge. 318 Man 319 Mason, Carpenter, Welder 320 Plumber, Painter, Aluminium Fabricator 321 Woman 322 Supplying And Stacking At Site 40Mm Hard Granite Broken Stone In Standard Stack Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete For Pre-Measurement. 323 Supplying And Stacking At Site 20Mm Hard Granite Broken Stone In Standard Stack Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete For Pre-Measurement. 324 Supplying And Stacking At Site 12Mm / 6Mm Hard Granite Broken Stone In Standard Stack Including Cost And Conveyance Of All Materials Labour Other Incidentals Etc. Complete For Pre-Measurement. 325 Supplying And Stacking At Site Good Quality Red Gravel In Standard Stack Including Cost And Conveyance Of All Materialslabour Other Incidentalsetc. Complete For Pre-Measurement. 326 Supplying And Stacking At Site Good Quality Crusher Sand In Standard Stack Including Cost And Conveyance Of All Materialslabour Other Incidentalsetc. Complete For Pre-Measurement. 327 Suppying And Stacking At Site Opc / Ppc / Psc Conforming To Relevant Is. 328 Supplying And Stacking At Site Tor Steel Reinforcement Bars Of Different Diameters Conforming To Relevantis1786 . 329 Hire Charge For Jcb ( Rate Is Inclusive Of All Operational Expenditure Such As Diesel, Oil, Operator Etc ) . 330 Hire Charge For Road Roller ( Rate Is Inclusive Of All Operational Expenditure Such As Diesel, Oil, Operator Etc ) . 331 Hire Charge For Earth Compactor ( Rate Is Inclusive Of All Operational Expenditure Such As Diesel, Oil. Labour Etc ) . 332 Shifting Furniture With Or Without Lead From One Office / Shop To Another Office / Shop At Any Where In Csl Without Damaging To The Materials / Adjoining Structures Etc At All Heights As Per The Direction Of The Engineer-In-Charge. ( Transportation Of Files, If Any Along With The Furniture Shall Be Done Without Any Extra Cost. Shifting Furniture Which Cannot Be Paid Under This Item Shall Be Paid For The Labour Employed As Per The Relevant Item. ) 333 Cots, Steel Or Wooden Rack ( Big Size Above 1.5M Height ) 334 Steel Or Wooden Rack ( Small Size Upto1.5M Height ) 335 Sofa Big Size, Executive Wooden Table / Modular Work Station ( To Be Dismantled And Refitted If Required ) 336 Other Table / Sofa Small Size / Ship Models 337 Steel / Wooden Almirah ( Upto 1.5M Height ) 338 Steel / Wooden Almirah Big Size Above 1.5M Height 339 All Types Of Chair / Bench / Fan / Tea-Poy / Computer / Ups / Printer 340 Printer ( Bigsize ) , Photo Copier, Scanner, Cooler 341 Small Boxes, Battery, Wooden Screen 342 Carton Box With File / Other Items , Wooden Trays ( All Size ) 343 Dining Table With Seat 344 Supplying And Fixing Best Quality And Approved Type Automatic Hydrualic Door Closers ( Medium ) As Per The Instructions Of The Department Personals Including All Cost Of Materials, Labour Charges Etc. Complete As Diretcted By The Engineer-In-Charge 345 Servicing Automatic Door Closers Once In One Year Orat Call After Repairs Including Cost And Labour For Replacement Of Defective Parts If Any Etc. Complete All As Directed By The Engineer-In-Charge. 346 Servicing Of Floor Spring Through Authorized Servicing Agents, Replacing Springs, Pivots Or Any Other Necessary Spares, Accessories And Consumable If Required Including Cost And Conveyance Of All Materials, Labour, All Other Incidentals Etc Complete. 347 Providing And Fixing Highly Adaptable Floor Spring ( Light Duty ) Suitable For All Standared Single And Double Action Door Including Cost And Conveyance Of All Materials, Labour, All Other Incidentals Etc Complete. 348 Providing And Fixing Highly Adaptable Floor Spring ( Heavyt Duty ) Suitable For All Standared Single And Double Action Door Including Cost And Conveyance Of All Materials, Labour, All Other Incidentals Etc Complete. 349 Departmently Issued Automatic Hydrualic Door Closers ( Medium ) As Per The Instructions Of The Department Personals Including All Cost Of Materials, Labour Charges Etc. Complete As Diretcted By The Engineer-In-Charge . ( Door Closer Issued Free Of Cost ) 350 Supplying And Fixing Approved Quality Corner / Centre Locking System To Glass Doors With Suitable Fittings, Including All Cost Of Materials, Labour Charges Etc. Complete As Diretcted By The Engineer-In-Charge. 351 Supplying And Fixing Approved Quality Glass Door Handles With Suitable Fittings, Including All Cost Of Materials, Labour Charges Etc. Complete As Diretcted By The Engineer-In-Charge. 352 Servicing / Repairing Of Locking System & Doorhandles For Existings Glass Doors Including Cost And Labour For Replacement Of Defective Parts If Any Etc. Complete All As Directed By The Engineer-In-Charge.
|
