|
Cabinet - Specification: High Cabinet, In Crowded Wood / Mdf / Mdp, Coated In Low Pressure Melamine Laminate, With Pvc Or Abs Profile Finish, Measuring Approximately 1, 60 X 0, 90 X 0, 45 M (A X L X P). Containing Two Opening Doors, Three Hinges, Handle Handle, With Lock, 03 Adjustable Shelves. The Wooden Plates Should Have A Minimum Thickness Of 25 Mm For The Upper Top, And At Least 18Mm For The Body, Doors And Shelves, Base With Steel Refurbishment, With Epoxy Powdered Electrostatic Painting, Containing Adjustable Floor Shoes. Manufactured In Accordance With Current Nbr/Abnt Standards And Assembly Included. It Can Be Purchased In Clay, Gray, Platinum Gray, Sand, Beige, Eggshell Or Ivory., Cabinet - Specification: Low, Melamine Laminate Cabinet, Rigid Pvc Profile Finish With 1, 5 Mm Thickness, Measuring Approximately 900 X 900 Mm (A X L X P). Containing 02 Opening Doors With Simultaneous Locking Steel Lock, Removable And Adjustable Internal Shelves, Wooden Plates With A Minimum Thickness Of 25 Mm For The Top, And Other Parts With At Least 18 Mm Thick, Containing Double -Sided Bottom. The Doors Should Be Equipped With At Least 02 Steel Hinges, Base With Levels Of Steel Pins, Manufactured According To Current Standards And Assembly Included. Can Be Purchased In Clay, Office Table - Specification: L -Top Work Table, Approximate Dimensions: 1400 X 600 X 1400 X 600 X 74 Mm (Lxpxlxpxh). According To Nbr 13967, With Holes For The Passage Of Wires. Mdf/Mdp Top With A Minimum Thickness Of 25 Mm, Egg Bark Color Or Similar, A Polystyrene Profile Finish Or Similar In The Same Color As The Top With Cable Guides. Structure Composed Of Two Vertical Porches, Stamped On Carbon Steel Plate With At Least 1, 6 Mm Thick, Allowing Wiring To Rise Through The Side Loot Of The Vertical Chute Attached To The Porch; Lower And Top Base Consisting Of A Single Piece, Produced On Steel Plate, With Natural Nylon -Level Shoes, Allowing A Total Height Of The Table Of Approximately 740 Mm; Carbon Steel Slate With At Least 1, Enabling Spinning Rise, With Natural Nylon Levels; Horizontal Steel Horizontal Electro-Calha, Fixed To The Side Structure For Telephone/Electrical/Data Installation; Fixed Drawer With 02 Drawers, Approximate Dimensions Of 400 X 400 X 257 Mm (Lxpxh) Made With Folded Metal Sheets. Manufactured In Accordance With The Current Standards, And Assembly Included., 03/21/2025, Desktop Table - Specification: 03 Drawers, In Mdf/Mdp Wood, Coated In Melamine Laminate, With Pvc Profile Finish, With Rectangular Top Measuring 1200 X 600 X 740 Mm (Lxpxh), Minimum Thickness Of 18 Mm, At The Approximate Total Height Of 740 Mm, Steel Structure, Rectangular Section, And Plate With A Minimum Thickness Of 1, 2 Mm, Epoxy Epoxy Epoxy Paint Or Similar, Containing A Drawer With Approximate Size Of 300 X 400 X 350 Mm (Lxpxh), For 03 Drawers, Lock With Simultaneous Closing System, Front Panel, With Minimum Thickness Of 15Mm, Made In Accordance With Current Rules And Assembly Included.
|
