|
Tenders Are Invited For Rehabilitation Of Qala-E-Zaman Irrigation Canal In Center Of Farah Province. 1 Mob&Dmob Mobilization & Demobilization Mobilization And Demobilization Shall Include All Activities And Associated Tasks For Transportation Of Contractor Personnel, Equipment, And Operating Supplies To The Site; Establishment Of Offices, Buildings, And Other Necessary General Facilities For The Contractors Operations At The Construction Site And Removal, Site Cleanup Of Offices, Buildings, And Other Facilities Assembled On The Site Ls 1.00 2 Exc 1 Excavation Type1 Provide All Necessary Materials, Tools, Equipment And Labor For Excavation In Soil ( In Canal/River Bed Etc.) Including Dewatering And Preparing Site For Construction Works And Primary Cleaning Of The Area From Shrubs, Unnecessary Trees, Waste And Surplus Materials. M3 4883.89 3 Backfill Filling Provide Compactable (Suitable) Material For Bed And Embankment Of Canal For Backfilling With Selected Material From Excavation Or Borrow Pits From Approved Source Including Compaction To (85-90)% Of Modified Proctor In Layers Not More Than 15 Cm Thick In Accordance To The Relevant Designed Drawing And Technical Specification And With Satisfaction Of Field Engineer . M3 1628.26 4 Stmason 1:3 Stone Masonry Type A(1:3) Providing And Laying Stone Masonry From Approved Mountain Stone With Cement Sand Mortar (Crush Plant Of Sand Size 1Mm To 5Mm) 1:3 (Type A) As Per Relevant Design Drawings, And Technical Specifications, And With The Satisfaction Of The Field Engineer. M3 2202.09 5 Pointing 1:3 Pointing 1:3 Surfacing And Pointing Of Stone Masonry With 1: 3 Cement Sand Mortar (Crush Plant) Including All Necessary Materials, EquipmentS, Labors, Scaffolding, Curing In Accordance To The Design Drawings, Technical Specification And With Satisfaction Of Field Engineer . M2 6212.90 6 Pccm20 Power Control Centre Class M-20 Supplying, Placing, Compacting And Curing Plain Cement Concrete Class M20 ( 1:1.5:3 ) Or According To Mix Design Including Formworks, Contraction And Expansion Joints Sealing Works As Per Relevant Design Drawings, Technical Specification And Satisfaction Of Field Engineer . M3 814.49 7 Rccm20 Rcc Class M20 Supplying, Placing, Compacting And Curing Of Reinforced Cement Concrete Class M20 ( 1:1.5:3 ) Or According To Mix Design Including Steel Reinforcement And Formworks As Per The Design Drawings ,Technical Specification And With Satisfaction Of Field Engineer . M3 5.49 8 Gravel Gravel/Boulder Supplying, Laying, Moisturing And Compacting Of Base Course Material (Crush Aggregates With Boulder ) Size( 2.5Cm , 5Cm,10Cm) Under Power Control Centre On The Bottom Of The Foundation In Accordance To The Relevant Design Drawings, Technical Specification And With Satisfaction Of Field Engineer . M3 679.80 9 Manual St Manual Steel Plate For Turnout Structure With U Channel For Check Supply /Fabrication And Installation Of Manual Steel Gates , Width (50)Cm, 4Mm Thickness (50-60 Cm Height) Professionally Welded, Including Steel Chain Mad From 6Mm Bar Securely Fixed To Gate Handle And Structure And With One U Channel For Check Without Considering A Steel Leaf As Per Design Drawings And Technical Specifications Including One Coat Antirust And Two Coat Enamel Paint .With All Other Accessories, Labors, Tools And Materials As Per Design Drawings And Technical Specifications And With Satisfaction Of Field Engineer . No 66.00 10 Steelgates Steering Steel Gate Checks/Turnouts Supply/Fabrication And Installation Of Mild Steel Vertical Steering Gate Including Three Coats Of Enamel Paint (One Coat Of Redoxide + Two Coat Of Enamel Paint), Including All Other Necessary Equipment, Labors And Material Complete In All Respect As Per Relevant Design Drawing/Technical Specification And Complete With Satisfaction Of The Field Engineer. No 6.00 11 Pvc W Stop. Joint Joint Preparation (Pvc Water Stopper) At Each Provide All Necessary Materials, EquipmentS, Labors And Other Required Tools For Supply And Installation Of Best Quality Pvc Water Stopper With 22.5 Cm Width (The Water Stopper Shall Be Of Extruded Polyvinyl Chloride Complying With Bs 2571: Class 3, Compound Type G4 ) And (2) Cm Thick Cork Filling As Per Relevant Design Drawings, Technical Specification And With Satisfaction Of Field Engineer . M 373.35 Questions Submission Method: For Any Questions/Clarifications Related To This Rfp, Please Email To Cbardquestions@Rootsofpeace.Org And Mention The Rfp Number In The Subject Line Of Your Email. Please Do Not Send Your Bid To This Email Address. Any Proposals Sent To The Above Email Address Will Lead To The Disqualification Of A Proposal From Evaluation. Rfp Closing Date & Time: Feb 06, 2025 16:00 Hours Kabul Local Time. Proposal Submission Method: Offers Should Be Submitted Via Email To Cbard-Bids@Rootsofpeace.Org Prior To The Closing Date Above. Please Send Your Bid Documents As Email Attachments Only. Online Links To Bid Documents Will Not Be Accepted And Will Not Be Considered For Evaluation. Please Submit Only The Documents Requested In This Rfp. Your File Or Bid Document Size Should Not Be More Than 15Mb. Tender Link : Https://Www.Developmentaid.Org/#!/Tenders/Search
|
