Quotation Are Invited For Custom Benches - As Per Spec... Attached in South Africa

Work Detail

Quotation are invited for Custom Benches - as Per Spec... Attached Delivery Date: 2025/05/30 Delivery To: Roads Planning MATERIALS STORE Delivery Address: 0 Cape Town City Centre, Cape Town Closing Date: 2025/01/30 Closing Time: 04:00 PM Description: 6 each x custom benches - as per spec... Attached Specification: * The manufacture, assembly and delivery of custom benches are to be undertaken, as indicated on the attached Timber Block Bench Details drawing: LA-SG-WA-TD-LD-200, as follows: 6.1 Galvanised steel brackets: 2 Number Steel 6mm plate brackets per bench, joints welded to form "U" with the dimensions of 335mm high x 270mm wide x 120mm deep. A steel 6mm plate welded to the centre of each bracket to provide stability, with the dimensions 90mm high X 258mm wide. 2 pairs of aligned holes with dimensions of 14mm diameter set at 60mm centres from the top of the bracket for M12 threaded rod. 2 holes at bracket base plate to be 18mm diameter for M16 threaded rod base anchors. Steel brackets to have smooth edges and be free of any damage. Brackets to be hot-dip galvanised as complete units to ensure galvanised finish. 6.2 Seat fixing: The bracket is fixed to timber seat block by M12 galvanised steel threaded rods with galvanised steel dome cap nuts and flat washers. All nuts to be tack welded after final tightening. 6.3 Timber block seat: Cladocylex (Sugar Gum) timber block to act as bench seat, with a dimension of 1500mm long x 300mm wide x 300mm deep. Timber surface to have a sanded and oiled finish. 10mm chamfers on all top edges. 4 number recesses with the dimensions 200mm high x 130mm wide and 25mm deep for the placement of the bench brackets with 4 number 14mm diameter holes to match brackets, to be drilled through to fit the M12 threaded rods. Timber seat finish is to be free of splinters, chips and cracks. 6.4 20L (litres) of timber oil to be provided for future maintenance Photos of a sample bench must be provided to the Client prior to the awarding of the contract. "Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent". *** PLEASE NOTE SAMPLES / PICTURES / TECHNICAL DATA SHEETS WILL BE REQUESTED WHEN NEEDED *** *** PLEASE ENSURE THAT ALL REQUIRED INSURANCES ARE ATTACHED AND THAT THEY ARE UP-TO-DATE # BY NOT ATTACHING THIS WILL BE DEEMED NON- RESPONSVIE. IF YOU UTILISE COURIERS AND DO NOT HAVE MOTOR VEHICLE INSURANCE, THEN PLEASEE MENTION THIS. ALSO IF LOCAL CONTENT IS REQUIRED # THEN ATTACH THOSE DOCUMENTS AS WELL AND ENSURE THAT THE CORRECT DOCUMENTS ARE ATTACHED *** SAMPLES / TECHNICAL DATA SHEETS TO BE ATTACHED TO THE RFQ ON THE DAY OF CLOSING. FAILURE TO SUBMIT BY THE PRESCRIBED TIME MAY RESULT IN YOUR OFFER BEING NON-RESPONSIVE. **Kindly note that the MBD6.1 has been amended, kindly familiarise with the content.** Delivery of benches to Ebenezer Roads & Stormwater Depot, Ebenezer Road at intersection of Dock Road, Cape Town City Centre. Tender Link : http://web1.capetown.gov.za/web1/ProcurementPortal/RFQ/Details/298830

Contact Information