|
Segregation Of 11 Kv Mixed Feeders Supply, Erection, Installation, Testing And Commissioning Of Material/ Equipment For Development Of Distribution Infrastructure Work For Segregation Of 11 Kv Mixed Feeders At Bhilwara Circle Of Ajmer Discom Of Rajasthan State Under Rdss.- 1 Segregation of remaining Agriculture Feeders under RDSS 2 A) HT Lines and associated works: 3 A-(1) 11 KV 3 Phase Overhead Line (ACSR Rabbit) 4 Supply of PCC Poles 9 mtrs (200 Kg) 5 Supply of overhead steel cored aluminum ACSR Rabbit conductor. 6 Supply of 11 KV V Cross arm with top hamper & clamps (galvanized as per IS), 0.2 m long made of MS Channel 100x50x6 mm,MS Angle 65x65x6 mm & MS flat of size 50x6 mm weight(12.789 Kg.) Approx. 7 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 8 Stay Set 9 Strain/Guy Insulator 10 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 11 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 12 Supply of11 KVdouble pole line structure set for cut point complete on existing poles in all respect with clamp, nut & bolts as requried made fromM.S.Channel 100 x 50x6 , M.S.Angle 65 x 65 x 6 mm, M.S.Angle 50 x 50 x 6 mm and M.S.Flat 50 x 6mm ( 101.383 Kg. Approx.)(Galvanized as per IS) 13 Supply of earthing rod sets for 11KV linesmade with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx.) total length / weight, 17 meter / 1.64 Kg.) as per latest specification and drawing adopted & approved by NIGAM. 14 Supply of 11 KV Polymer Composite Pin Insulator with pin 15 Supply of Composite Polymer Disc insulators for 11 KV 45 KN “T&C” type 16 Supply of 11KV T & C Type 45 KN Hardware 17 Supply of PG clamps (Rabbit to Rabbitl) 18 Supply of 8 SWG (4 mm dia) GI wire for continuous earthing of 11 KV Line hot dip (Galvanized) 19 Supply of 11 KV Danger plate of size 200 X 250 mm complete in all respect 20 Supply ofGuarding brackets ( 1set = 2 Nos.)per span of 11 KV made of M.S. Angle 65X65X6 mm with clamps made of Flat 50x6, using Eye Hook 300X16 mm (75% Thread with Nut of Suitable Size) (galvanized) 21 M.S. Angle (2x1.83 M),65X65X6mm, 10.614X2=21.228 Kg (Approx) (1set= 2 Nos) 22 Clamp of M S Flat 50x6 mmusing Eye Hook 300X16 mm (75% Thread with Nut of Suitable Size) (1set= 2 Nos) (2.218*2= 4.436 Approx) 23 G I Wire 8 SWG,68 Mtr, 6.66 Kg 24 Supply ofM.S.Channel 100 x 50X6 (for cut point) 2 Nos. x 1.3 meter long with pilot patti 50 x 6 mm thick on single support/pole/lattice structure & necessary clamps, nut & bolts etc. (29.5Kg. Approx.).(Galvanized as per IS) 25 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size 26 A-(2) 11 KV UG 3CX185 Sqmm XLPE Cable at emanating point of GSS to avoid ROQ (100 meter single circuit each) 27 Supply of PCC Poles 9 mtrs (200 Kg) 28 Supply of11 KVdouble pole line structure set for cut point complete on existing poles in all respect with clamp, nut & bolts as requried made fromM.S.Channel 100 x 50x6 , M.S.Angle 65 x 65 x 6 mm, M.S.Angle 50 x 50 x 6 mm and M.S.Flat 50 x 6mm ( 101.383 Kg. Approx.)(Galvanized as per IS) 29 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 30 Stay Set 31 Strain/Guy Insulator 32 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 33 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 34 Supply of PG clamps (Rabbit to Rabbitl) 35 Supply of Composite Polymer Disc insulators for 11 KV 45 KN “T&C” type 36 Supply of 11KV T & C Type 45 KN Hardware 37 Supply of 11 KV XLPE Insulated Armoured Cable size of3CoreX185 Sq. mm. 38 Supply of Cable End Termination Kit/ST Joint, Making Outdoor/ Indoor Joint For11 kV. 39 XLPE 3X185 SQ.MM H.S. ON OUTDOOR TYPE 40 XLPE 3X185 SQ.MM H.S.S.T. JOINT 41 Supply of earthing rod sets for 11KV linesmade with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx.) total length / weight, 17 meter / 1.64 Kg.) 42 Supply of Clamp of M S Flat 50x6 mm(2x0.501m, wt. 2.36 Kg. Approx) 43 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size 44 A-(3) 11 KV Bay Extension with VCB 45 Supply of PCC Poles 9 mtrs (200 Kg) 46 Supply ofoutdoor 11 KV 630 Amp.O/D VCB KIOSK complete with accessories including use of special tools & conducting all pre commissioning tests before energisation, filling oil etc. complete in all respect with erection& grouting of structure 47 Supply of 11 KV Polymer Composite Pin Insulator with pin 48 Supply of 45 KN. porcelain disc.insulators for 11 KV (each unit consisting of 2 disc insulators & one B&S Type hardware)including all acessories etc. 49 Supply of overhead steel cored aluminum ACSR Dog conductor 50 Supply of PG Clamps forDogConductor 51 Supply of earthing rod sets for 11KV linesmade with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx.) total length / weight, 17 meter / 1.64 Kg.) 52 Supply of horn gap sets including hardware nut & bolt & washer etc. - 11KV ( with 6 x 24KV Post Insulator )1 Set=3 Nos 53 Supply ofSub-station type (9 KV 10 KA Station class) (1 set=3 No.) lightening arrestors on the existing brackets in all respect as required including hardware, nut , bolt &washers etc. For O&M works INCLUDING CONNECTION WITH EARTH BY 6 SWG GI WIRE AS REQUIRED AND JUMPERING ETC.,IN SEPARATEEARTH PIT 54 Supply of 11KV with ( 9 x 24 KV Post Insulator)400 Amp. Double break without EB GO Isolator switch set (Air Break) (consisting of 3 limbs)including nut & bolts etc. 55 Supply of 11 KV Danger plate of size 200 X 250 mm complete in all respect 56 Supply of metering points on 11 KV outgoing feeder at 33/11 KV S/S. 57 Supply of 11KV CT PT Set(200/5 Amp.) 58 Supply of MIP meter box having dimension 1100x625x375 mm fabricated out of 1.6 mm thick MS sheet and MS Angle size 25x25x3 mm. The test terminal block(TTB) link type shall be provided by contractor in the meter box. 59 Supply of 11 KV Bay Channel Size of 75x40x6 [ 6 nos of 3750 mm ( Total size 22.5 mtr. = 6x3.75mtr) & 2 nos of 3400mm (Total size6.8 mtr. = 2 x 3.4mtr.)]& 100x50x6 [6 nos of 3750 mm (Total size 22.5 mtr. = 6 x 3.75 mtr)] Approx Weight424.30 Kgs.[(22.5mtr.+6.8mtr.) x 7.14 Kgs. Per mtr = 209.20 kgs.) + (22.5 mtr. x9.56 kgs. per mtr. = 215.1 kgs.) 60 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size 61 A-(4) Crossings 62 A-(5) (a) 11 KV Railway Crossings (Underground Double circuit) (b) 11 KV NHAI crossings (underground Double circuit)(c) 11 KV crossings (underground single circuit ) for crossings of existing 33 KV/EHV lines 63 Supply of PCC Poles 9 mtrs (200 Kg) 64 Supply of11 KVdouble pole line structure set for cut point complete on existing poles in all respect with clamp, nut & bolts as requried made fromM.S.Channel 100 x 50x6 , M.S.Angle 65 x 65 x 6 mm, M.S.Angle 50 x 50 x 6 mm and M.S.Flat 50 x 6mm ( 101.383 Kg. Approx.)(Galvanized as per IS) 65 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 66 Stay Set 67 Strain/Guy Insulator 68 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 69 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 70 Supply of PG clamps (Rabbit to Rabbitl) 71 Supply of Composite Polymer Disc insulators for 11 KV 45 KN “T&C” type 72 Supply of 11KV T & C Type 45 KN Hardware 73 Supply of 11 KV XLPE Insulated Armoured Cable size of3CoreX185 Sq. mm. 74 Supply of Cable End Termination Kit/ST Joint, Making Outdoor/ Indoor Joint For11 kV. 75 XLPE 3X185 SQ.MM H.S. ON OUTDOOR TYPE 76 XLPE 3X185 SQ.MM H.S.S.T. JOINT 77 Supply of earthing rod sets for 11KV linesmade with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx.) total length / weight, 17 meter / 1.64 Kg.) 78 Supply of Clamp of M S Flat 50x6 mm(2x0.501m, wt. 2.36 Kg. Approx) 79 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size 80 A-(6) 11 KV Crossings (Overhead on Lattice Tower) for crossing of existing 11 KV & LT Lines 81 Supply of 36 Feet Long Lattice tower (Approx weight 449.85 Kg) (Galvanized) 82 Supply of overhead steel cored aluminum ACSR Rabbit conductor. 83 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 84 Stay Set 85 Strain/Guy Insulator 86 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 87 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 88 Supply ofM.S.Channel 100 x 50X6 (for cut point) 2 Nos. x 1.3 meter long with pilot patti 50 x 6 mm thick on single support/pole/lattice structure & necessary clamps, nut & bolts etc. (29.5Kg. Approx.).(Galvanized as per IS) 89 Supply of earthing rod sets for 11KV linesmade with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx.) total length / weight, 17 meter / 1.64 Kg.) as per latest specification and drawing adopted & approved by NIGAM. 90 Supply of 11 KV Polymer Composite Pin Insulator with pin 91 Supply of Composite Polymer Disc insulators for 11 KV 45 KN “T&C” type 92 Supply of 11KV T & C Type 45 KN Hardware 93 Supply of PG clamps (Rabbit to Rabbitl) 94 Supply of 11 KV Danger plate of size 200 X 250 mm complete in all respect 95 Supply ofGuarding brackets ( 1set = 2 Nos.)per span of 11 KV made of M.S. Angle 65X65X6 mm with clamps made of Flat 50x6, using Eye Hook 300X16 mm (75% Thread with Nut of Suitable Size) (galvanized) 96 M.S. Angle (2x1.83 M),65X65X6mm, 10.614X2=21.228 Kg (Approx) (1set= 2 Nos) 97 Clamp of M S Flat 50x6 mmusing Eye Hook 300X16 mm (75% Thread with Nut of Suitable Size) (1set= 2 Nos) (2.218*2= 4.436 Approx) 98 G I Wire 8 SWG,68 Mtr, 6.66 Kg 99 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size 100 B-(1) DISTRIBUTION TRANSFORMER THREE PHASE (25 KVA & 63 KVA) of HVDS 101 Supply of PCC Poles 9 mtrs (400 KG) 102 Supply of 11 /0.4 KV 25 KVA Al woundconventional outdoor type distribution transformers 103 Supply of 11 /0.4 KV 63 KVA Al woundconventional outdoor type distribution transformers 104 Supply of overhead steel cored aluminium ACSR Rabbit conductor 105 Supply of 11/0.4 KV SubStation structure set (Galvanized) onexisting poles in all respect with clamps as required made from M.S. channel 100x50 X6 mm, M.S. channel 75x40x6mm, M.S. angle 75x75x6 mm, M.S. Angle 50x50x6 mm , M.S. Angle 45x30x5 mm andM.S. flat 50x6 mm weight(284.36 kgs.) Approx 106 Supply of horn gap sets including hardware nut & bolt & washer etc. - 11KV ( with 6 x 24KV Post Insulator )1 Set=3 Nos 107 Supply of set of 3 nos. of earthing rod sets for S/S made with MS Rod (Galvanized) 20 mm dia, 3 meter length alongwith GI wire 8 SWG (approx. total length / weight, 50 m / 4.907 Kg.) 108 Supply of 11KV with ( 9 x 24 KV Post Insulator)400 Amp. Double break without EB GO Isolator switch set (Air Break) (consisting of 3 limbs)including nut & bolts etc. 109 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 110 Stay Set 111 Strain/Guy Insulator 112 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 113 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 114 Supply of 11 KV Polymer Composite Pin Insulator with pin 115 Supply of Composite Polymer Disc insulators for 11 KV 45 KN “T&C” type 116 Supply of 11KV T & C Type 45 KN Hardware 117 Supply of 11 KV Danger plate of size 200 X 250 mm complete in all respect 118 Supply of PG clamps (Rabbit to Rabbit) 119 Supply of LT Distribution piller Boxes of 400 Amps. Capacity. 120 Supply of LT XLPE Armoured 4Cx70 sqmm 121 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size 122 C-(1)LT Three Phase AB Cable 3CX25+25 Sqmm 123 Supply of PCC Poles 9 mtrs (200 Kg) 124 Supply ofoverhead ABC(Aerial bunched cable)3Cx25+1x25 sqmm. 125 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 126 Stay Set 127 Strain/Guy Insulator 128 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 129 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 130 Supply of suspension clamps with eye hook bolt and PCC Pole Clamps (NFC type) suitable for AB Cable Complete in all respect. 131 Supply of dead end clamp with eye hook bolt and PCC Pole Clamps (NFC type) suitable for AB Cable Complete in all respectt. 132 Supply of LT Insulation piercing connector (French standard) Type-A suitable for AB cable Complete in all respect. 133 Supply of Insulation piercing connector (French standard) Type-B suitable for AB cable Complete in all respect. 134 D-(1) Re-conductoring of feeders (conversion from weasel to Rabbit ) with existing Agriculture Load>100 Amp. 135 Supply of PCC Poles 9 mtrs (200 Kg) 136 Supply of overhead steel cored aluminum ACSR Rabbit conductor. 137 Supply of 11 KV V Cross arm with top hamper & clamps (galvanized as per IS), 0.2 m long made of MS Channel 100x50x6 mm,MS Angle 65x65x6 mm & MS flat of size 50x6 mm weight(12.789 Kg.) Approx. 138 Supply of Galvanized Stay set of 1.8 m long, 16 mm diameter solid GS stay rod & 300x300x4 mm anchor plate including, 2 Nos. 50x8 m Stay clamp, 1 nos. HT stay guy insulator, nut bolts, 2 Nos. turn buckles & 7/3.15 mm dia GI stranded wire etc. 139 Stay Set 140 Strain/Guy Insulator 141 Stay Wire 7/10 mm size (1 set = 5.508 Kg) 142 Stay Clamps (Set = 2 Nos. Clamps) ( 1.7 Kgs. Approx) 143 Supply of 11 KV Polymer Composite Pin Insulator with pin 144 Supply of Composite Polymer Disc insulators for 11 KV 45 KN “T&C” type 145 Supply of 11KV T & C Type 45 KN Hardware 146 Supply of PG clamps (Rabbit to Rabbitl) 147 Supply of 11 KV Danger plate of size 200 X 250 mm complete in all respect 148 Supply of M.S. Nuts & Bolts (Galvanized) of assorted size
|
