Bids Are Invited For Hiring A Specialized Company To Acquire Furniture For Classrooms And Other School Envir ... in Brazil

Work Detail

Description Base Cabinet With Two Doors, Equipped With Two Shelves In Mdp Or Mdf, Covered With Low Pressure Melamine Laminate, Gray Color With Edges And Components In Yellow, Orange, Blue Or Green. Dimensions And Tolerances Cabinet Width 810 Mm Depth 500 Mm Height 740 Mm Tolerance Up To 2 Mm For Width And Depth, / 1 Mm For Thickness And / 10 Mm For Height. Doors Width 400 Mm Depth 630 Mm Thickness 18 Mm Shelves Width 768 Mm Depth 455 Mm Thickness 18 Mm Features (As Per Notice)..., Description Steel Wardrobe Cabinet With Sixteen Doors With Louvers For Ventilation, Independent Medium Size Compartments Without Internal Dividers , Closing Of Independent Doors Using A Padlock Stud. Dimensions And Tolerances Width 1230 Mm / 30 Mm Depth 400 Mm / 30 Mm Height 1980 Mm / 30 Mm Tolerances For Paint Layer Minimum 40 Micrometers / Maximum 100 Micrometers. Characteristics Body, Partitions And Doors In Sheet Metal 22 (0.75Mm) Compartment Floor In Sheet Metal 20 (0.90Mm) Feet In Sheet Metal 16 (1.50Mm) Internal Sheet Metal Hinges Not Visible On The Outside Of The Cabinet At Least 75Mm High 14 (1.9Mm), Two Units Per Port. Printed Or Overlapping Label Holder, The Latter Being Exclusively Made Of Chromed Non-Ferrous Metal Alloy. Painting In Epoxy/Polyester Hybrid Powder Paint, Glossy Electrostatic, Polymerized In An Oven, Minimum Thickness Of 40 Micrometers In Gray. Minimum Warranty Of Three Years From The Date Of Delivery, Against Manufacturing Defects And Oxidation., Description Tall Steel Cabinet, Divided Vertically Into Two Compartments By Means Of Partitions With Independent Doors, Equipped With Four Removable And Adjustable Shelves In Each Compartment. Dimensions And Tolerances Width 900 Mm / 10 Mm Depth 400 Mm / 10 Mm Height 1980 Mm / 10 Mm Tolerances For Paint Layer Minimum 40 Micrometers / Maximum 100 Micrometers. Characteristics Body, Partitions And Doors In Cold-Rolled Sheet Steel Plate 22 (0.75 Mm). Shelves And Door Reinforcement In Cold-Rolled Sheet Steel Sheet 20 (0.90Mm). Base In Cold Rolled Steel Sheet Plate 18 (1.25 Mm). Door Locking Bars Ø 1/4 (Minimum). Internal Hinges Not Visible On The Exterior Of The Furniture Made Of Cold-Rolled Steel Plate 14 (1.9 Mm) With A Minimum Of 75 Mm In Height Three Units Per Door. Fully Metal Handle And Canopy, With Cremona System Locking. Cylindrical Barrel Lock Built Into The Handle With A Minimum Of 4 Pins. Duplicate Keys Attached To Corresponding Door Handles. Printed Or Overlaid Label Holder, Description Sliding Steel File With Four Drawers Mounted On Telescopic Rails That Allow Full Opening. Dimensions And Tolerances Height 1330 Mm / 10 Mm Width 470 Mm / 10 Mm Depth 710 Mm / 10 Mm Tolerances For Paint Layer Minimum 40 Micrometers / Maximum 100 Micrometers. Characteristics Body And Internal Structure In Steel Sheet 22 (Thickness 0.75Mm) In Gray Color Drawers In Sheet Metal 24 (0.60Mm) Telescopic Rails And Zinc-Plated Guides In Sheet Metal 18 (1.20Mm) Or Higher Locking Rod For Drawers In Sheet Metal 16 (1, 50Mm) Lower Closure (Next To The Floor) In Plate 24 (0.60Mm). Zamac Handles In 96Mm Steel Finish. Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Drawer Locking System. Duplicate Keys. Folder Compressors In All Drawers. This Label Holder

Contact Information

Other Detail