|
Provision Of Defi Md Accn At Mil Stn Bhuj - Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 28 2 Lump sum price worked out by the contractor for SITE CLEARANCE, EXCAVATION & EARTH WORKas listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 29 3 Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 30 4 Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 35 5 Lump sum price worked out by the contractor for ROAD & FOOT PATH as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 37 6 Lump sum price worked out by the contractor for SEWAGE DISPOSALas listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 39 7 Lump sum price worked out by the contractor for AREA DRAINAGEas listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the MES B/F from Sl page No. 40 8 Lump sum price worked out by the contractor for COMPOUND WALL, CHAIN LINK FENCING & GATEas listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 43 9 Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLYas listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 44 10 Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATIONas listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the MES B/F from Sl page No. 45 11 Sch A PART-XI (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as Rs 0.00 under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule. 12 INTERNAL WATER SUPPLY (OFFICERS QTR)Supply and fixing of 15 mm bore, fancy type, CP brass bib cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed.Make -Jaquar QUEEN SERIES Cat No QQT-7037 or techno commercial equivalent of any make specified in Appx B. 13 Supply and fixing of 15 mm bore, fancy type, CP brass angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed.Make -Jaquar QUEEN SERIES Cat No QQT-7053 or techno commercial equivalent makes as per Appx B. 14 Supply and fixing of of CP wall mixer 3 in 1 system including 1.5 m long tele shower and overhead shower of size 150x150 mm with wall flange ISI marked complete all as specified and directed.Make - Jaquar QUEEN SERIES Cat No 7281 or techno commercial equivalent of any make specified in Appx B. 15 Supply and fixing of overhead shower 150x150 mm of ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and directed.Make - Jaquar QUEEN SERIES Cat No 35495 or techno commercial equivalent makes as per Appx B. 16 Supply and fixing of 15 mm bore CP cast copper alloy body mixer sink cock with hot & cold mixing valves & casted central spout complete all as specified and directed.Make - Jaquar QUEEN SERIES Cat No QQT-7309 or techno commercial equivalent makes as per Appx B. 17 Supply and fixing of health foucet with 1200 mm long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed.Make -Jaquar QUEEN SERIES Cat No ALD-573 or techno commercial equivalent of any make specified in Appx B. 18 Supply and fixing of Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hosesand fixed complete all as specified and directed.Make - Jaquar Queen Series Cat Part No QQT - 7167B or equivalent. 19 Supply and fixing of two way angle cock chromium plated fancy type 15 mm bore complete all as specified and directed.Make -Jaquar QUEEN SERIES or techno commercial equivalent of any make specified in Appx B. 20 Supply and fixing of 15 mm bore, fancy type, CP brass bib cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed.Make -Jaquar ESSCO SERIES or techno commercial equivalent of any make specified in Appx B. 21 Supply and fixing of 15 mm bore, fancy type, CP brass angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed.Make -Jaquar ESSCO SERIES or techno commercial equivalent of any make specified in Appx B. 22 Supply and fixing of of CP wall mixer 2 in 1 system with central spout and connection for overhead shower with divertor lever ISI marked complete all as specified and directed.Make - Jaquar ESSCO SERIES or techno commercial equivalent of any make specified in Appx B. 23 Supply and fixing of overhead shower 114x114 mm of square of ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and directed.Make - Jaquar ESSCO SERIES or techno commercial equivalent of any make specified in Appx B. 24 Supply and fixing of two way angle cock chromium plated fancy type 15 mm borecomplete all as specified and directed.Make - Jaquar ESSCO SERIES or techno commercial equivalent of any make specified in Appx B. 25 INTERNAL ELECTRIFICATIONSupply and fixing of T.V./Telephone Socket Outlet, including M.S. Box of size 100x100x65 mm with cover plate complete all as specified and directed 26 Supply and fixing of RJ 11 Gang with shutter (Telephone Jack) complete with all accessories complete all as specified and as directed. 27 Supply and fixing of modular metal flush box 1/2 modulefor telephone and TV points complete all as specified and as directed. 28 Supply and fixing of modular white cover plate with frame 1 modulefor telephone and TV points complete all as specified and as directed. 29 Supply and fixing of PVC metal braided connection pipes for hot water supply with brass adopters 15 mm dia and 450mm long complete all as specified and as directed. 30 Supply and fixing of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. 31 Supply and fixing of LED lampB22 base 10 W, min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and as directed. 32 M & L for inverter point wiring for one light, ceiling fan and 5 Amp socket for each roomwith 2.5 sqmm,PVC insulated, unsheathed, single core multistandard copper conductor cable ( FRLS), 1100 volts grade including 2.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI markedwith its accessories upto the main DBand 15 A switch socket combination with gang box flushed in wallfor inverter power supplycomplete all as specified and as directed. 33 M & L for drawing 12 pair /multi core coated copper telephone cable including PVC conduit of size 20mm complete all as specified and as directed. 34 M & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etcas required 4mm dia GI wire complete all as specified and as directed. 35 Supplying, installation , testing and commissioning load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 poles 125 Amps, 16 KA, busbars ,neutral link, blanking plates complete with all accessories all as specified and as directed.Note: Outgoing MCBs shall be measured and paid separately 36 Supply and fixing of exhaust fan of 250 mm sweep made of sturdy engineering plastic suitable for SP 230/250 V, 50 Hz, RPM 1200 complete with louvers shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including connecting up with three core twisted flexible copper conductor cable of 1.0 sq mm size cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. 37 Supply and fixing of exhaust fan of 300 mm sweep made of steel body suitable for SP 230/250 V, 50 Hz, RPM 1200 complete with louvers shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including connecting up with three core twisted flexible copper conductor cable of 1.0 sq mm size cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. 38 EXTERNAL WATER SUPPLYSupplying, installation , testing and commissioning , factory made, CPRI approved LT panel, wall mounted board made of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof, with front opening hinge door and locking arrangementmounted on suitableMS flat iron panel body duly grouted on wall, having Aluminium bus bar 20 mm x 10 mm for phase and netural insulated with PVC sleeves, fixing offully automatic soft starter panel for 3.5 HP centrifugal pump set, , three phase, 430 V, 50 Hz,suitable rating semicon ductoer fuse and angle iron frame which is made out of 50x50x6 mm angle iron, factory fabricated cubical type weather proof, mounting on floor, civil work, including following protection:-(i) Under voltage & Over Voltage (ii) Under load & Over load(iii) Single phase preventor(iv) phase reversal(v) Earth fault(vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay)(viii) Switching surge 39 Supplying, installation , testing and commissioning , factory made, CPRI approved LT panel, wall mounted board made of CRCA sheet of 2 mm thick indoor type totally enclosed weather, dust and vermin proof, with front opening hinge door and locking arrangementmounted on suitableMS flat iron panel body duly grouted on wall, having Aluminium bus bar 20 mm x 10 mm for phase and netural insulated with PVC sleeves, fixing offully automatic soft starter panel for 7.5 HP centrifugal pump set, locking arrangement, three phase, 430 V, 50 Hz,suitable rating semiconductor fuse, CRCA sheet 2mm thick metal enclosure, duly powder coated and angle iron frame which is made out of 50x50x6 mm angle iron, factory fabricated cubical type weather proof, mounting on floor, civil work, including following protection:-(i) Under voltage & Over Voltage (ii) Under load & Over load(iii) Single phase preventor(iv) phase reversal(v) Earth fault(vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay)(viii) Switching surge 40 S&F LED Security light fitting 1x35 W made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 35 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.0 sqmm fixed with & including bracket made of GI Pipe 25 mm bore light grade, 1.20 m long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed. 41 ROAD & FOOT PATHM&L for 150 mm thick WMM (Wet Mix Macadam) (compacted thickness) laid in two layers of 75mm thick each conforming to grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanical means & rolled by using 8-10 ton vibrator power roller over compacted sub grade surface of soling as specified in clause 406 3.5 of MORTH specification and necessary lateral support and formwork if required complete all as specified and directed. 42 M&L for Material and labour Preparing concrete /bituminous surfaces and painting lines, dashes (continuous/un interrupted), arrows, letters, etc 20% glass beads (intermixed) exceeding 10 cm width with hot applied thermo plastic road making materials all as specified in clause 803.4 of MOSRT and H Specification, white or golden yellow (IS colour No.356) over a coat of primer complete all using road painting machine as per manufacturers instruction complete all as specified and directed. 43 COMPOUND WALL, CHAIN LINK FENCING & GATES&F Cast Iron (CI) wheel as rollers of 75 mm dia for gates complete. 44 M&L forPrecast reinforced cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate in louvers and jallies 35 mm thick (measured solid) including all mouldings but excluding frame and set in cement mortar (1:4) complete all as specified and directed. 45 EXTERNAL WATER SUPPLYSupply and lay pipe and testingductile iron both ends flanged and drilled, ISI marked, class K-7, with internal cement mortar lining in nominal bore dia of 150 mm (6) dia including push on joints, allDI fittings like Tee, Bend ,tailpiece as per site requirement, nults and bolts complete all as specified and directed. 46 Supply and lay and testingpipe ductile iron both ends flanged and drilled, ISI marked, class K-7, with internal cement mortar lining in nominal bore dia of 100 mm (4) dia including push on joints,allDI fittings like Tee,Bend ,tailpiece as per site requiremnet, nults and bolts complete all as specified and directed. 47 Supply and lay 25 mm bore UPVC pipe (SCH-40) supplied and laid complete including fittings, tee joints, reducers, sockets complete all as specified and directed. 48 Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ringon both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 100 mm ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed. 49 Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ringon both side, gland packing, class - PN 1.6 with flanged ends drilled suitable for bore of pipe 150 mm ISI marked (IS:14846:2000) having S.S. spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed. 50 M&L for cutting of existing DI/CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessary excavaton and earthwork, dewatering etc, if any involved, complete all specified and directed for 80mm to 100mm bore of pipe complete all as specified and directed. 51 Supply, install, test and commissioning self priming centrifugal pumpset of capacity 3.5 HP and having discharge ofapprox 300 LPMand head ofminimum 30 mtr,Foot mounted (B3),Fan cooled, including electric conncetion , suitable foundation with channel angle ,T-section, cut to required length and making holes for fixing of motor, grouting in foundation, necessary civil work, anti vibtration pad, conncetion to suction and discharge water mains with Universal Flexible joint of suitable dia for motor inlet and outlet dia to provide strees relief due to thermal and mechanical vibration or movements in water supply system both flanged ends for MS including all accessories of dia 100 mm completemotor suitable for 415V,3 phase,50 Hz,insulation class F,ambient of 50 C conforming to IS 12615:2011,IEC 60034-30-2008 and IP 65 protectioncomplete all as specified and directed. 52 Supply, install, test and commissioning self priming centrifugal pumpset of capacity 7.5 HP and having discharge ofapprox 700 LPMand head ofminimum 30 mtr,Foot mounted (B3),Fan cooled, including electric conncetion , suitable foundation with channel angle ,T-section, cut to required length and making holes for fixing of motor, grouting in foundation, necessary civil work, anti vibtration pad, conncetion to suction and discharge water mains with Universal Flexible joint of suitable dia for motor inlet and outlet dia to provide strees relief due to thermal and mechanical vibration or movements in water supply system both flanged ends for MS including all accessories of dia 100 mm completemotor suitable for 415V,3 phase,50 Hz,insulation class F,ambient of 50 C conforming to IS 12615:2011,IEC 60034-30-2008 and IP 65 protectioncomplete all as specified and directed. 53 S&F foot valve, flanged end, conforming to IS 4038, 100 mm dia complete all as specified and directed. 54 M&L for delivery header 100 mm dia Mild Steel pipe,Heavy class conform to IS 1239connecting the pump delivery pipes to header including flanged elbows , supporting structure for header pipe complete all as specified and directed. 55 Supply and fix cast iron air valves with double action air outlets,confirming to IS 14845 of size 100 mm dia bore and fixing up in cast iron water supply mains of size 100 mm dia complete all as specified and directed. 56 Supply and fix cast iron Non Return Valve,confirming to IS 5312 of size 80 mm dia bore and fixing up in DIwater supply mains of size 80 mm dia complete all as specified and directed. 57 Supply and fix cast iron Non Return Valve,confirming to IS 5312 of size 100 mm dia bore and fixing up in DI water supply mains of size 100 mm dia complete all as specified and directed. 58 M&L for Construction of new PCC solid Masonary valve chamber of size 450 X 450 X 450 mm (Internal dimenssions) with PCC foundation 1:4:8 type D2 using 40 mm graded stone aggregate 150 mm thick 150 mm wide off sets alround over 100 mm thick hard core , 200 mm thick PCC solid block walls built in CM 1:6, 50 mm thick PCC 1:2:4 Type B1 coping finished even and smooth, rendering 10 mm thick in cement mortar (1:6) finished even and smooth, with out using extra cement internally including top of floor including excavation earth work in hard/Dense soil 3 mm thick MS sheet cover fixed on 25 mm X 25 mm X 6 mm thick angle iron frame with hold fasts embedded in PCC coaping with locking arrangement, mild steel handle and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50 m etc complete all as specified and directed. 59 EXTERNAL ELECTRIFICATIONSSupply, installation, testing and commissioning weather and vermin proof L.T. feeder pillar box CPRI approved factory fabricated outdoor cubical/KIOSK type totally enclosed outer cage made out of 3.15mm thick sheet metal and inner compartments of 2.0mm thick sheet metal enclosure with angle iron frame of MS angle 50x50x6mm suitable for operation on 3 phase 4 wire system with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrengement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber bushes of prevent ingress of water/vermin etc, IP 54, air vents, inside the enclosure, the required nos of holes to be fixed wit chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/externally of approved colour with PCC foundation and aluminium bus bar for three phase and neutral mounted on epoxy insulator (R,Y,B,N) - 01 set with heat shrinkable coloured sleeves including connecting the following (Main Panel):- 60 (a) copper Bus bar, 250 amps (b) MCCB 4 Pole thermal magnetic release 415 volts 160 A 36 KA-01(incoming), (c) MCCB 4 pole thermal magnetic release 63 A, 16 KA -02 ( Proposed Bldgs -1 Nos & Spare -01 Nos ) (d) MCCB 4 pole thermal magnetic release 100 A, 16 KA -01 ( Proposed Bldgs -1 Nos)(e) Indicating lamps ( LED type) ( R-Y-B) -01 (Set of three) (f) Voltmeter digital type 0-500 V with inbuilt selector switch-01 No(g) Ammeter digital type 0-400 A with in built selector switch and CTs-01 No 61 All as per item No 59.00 hereinbefore but LT panel consisting of following:- 62 (a) Copper Bus bar, 500 amps (b) MCCB 4 Pole thermal magnetic release 415 volts 320 A 36 KA-01(incoming), (c)MCCB 4 pole thermal magnetic release 40 A, 16 KA -10 ( Proposed Bldgs -8 Nos & Spare - 2 Nos)(e) Indicating lamps ( LED type) ( R-Y-B) -01 (Set of three) (f) Voltmeter digital type 0-500 V with inbuilt selector switch-01 No(g) Ammeter digital type 0-400 A with in built selector switch and CTs-01 No 63 Note for item no 38, 39, 59 & 60:- Drawing of penal shall be got approved form GE before fabrication 64 M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by meansof nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GIprotection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. 65 M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than1.5 m below ground level connected to and including GI earth lead strip 32x6 mm by meansof nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 40 mm bore medium grade GIprotection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. 66 ARBORICULTUREDigging of pit n. Exc 0.25 cum in any type of soil including removal and filling back tp pit with suitable growing media like red earth by treating with farm yead manure in the ratio (3:1) fertilizers and pesticides (i.e. Bevation and neem cake BHC 10% linson dust. Thimment or phorate, manure super and vermicompost) and making up the trench area to proper level including supply and planting tree plants of species of height not less than 3 feet as Neem (Azadiracha indica) complete all as specified and directed. 67 Ditto all as per item No 63.00 hereinbefore but Gulmohar (Delonix regia) 68 Ditto all as per item No 63.00 hereinbefore but Peepal tree (Ficus religiosa) 69 Ditto all as per item No 63.00 hereinbefore but Banyan (Ficus benghalensis) 70 Ditto all as per item No 63.00 hereinbefore but Pink Cassia (Cassia javanica) 71 Ditto all as per item No 63.00 hereinbefore but Christmas tree (Araucaria heterophylla), 72 Ditto all as per item No 63.00 hereinbefore but Golden Cane Palm (Dypsis lutescens), 73 Ditto all as per item No 63.00 hereinbefore but Royal Palm (Roystonea regia) 74 Ditto all as per item No 63.00 hereinbefore but Foxtail Palm (Wodyetia bifurcata) 75 Ditto all as per item No 63.00 hereinbefore but False Ashoka (Monoon longifolium) 76 Pronv of MS Tree guard 450 mm dia, 1.50 m high with MS wiremesh of size 78mm x 37mm and 2mm dia of wire and MS angle iron 20x20x3mm verticals (3 Nos) 1.95 m long, 30 cm burried in ground & MS flats 14x3 mm around the tree guard (3 Nos @ top, middle and bottom) equally spaced and embedded vertical angles in PCC 1:3:6 Type C-1 including excavation in post holes and removal of excavated soil to a n. exc. 50 m and applying two coat of synthetic enamel paint including one coat of red oxide primer to tree guard and all as specified and directed. 77 Surface excavation in any type of soil not exceeding 30cm deep and averaging upto 15cm and removing filling back / spreading with aproved red earth of 15 cm thick mixed with farm yard treating the soil with pesticides (i.e Bavitin and neam cake BHC 10% linsondustThimment and Phorate, super and vermi compost in ratio (1:3) incl turfing/laying of(Bermuda grass (Cynodon dactylon), Buffalo grass (Stenotaphrum secundatum) & Korean lawn grass (Zoysia japonica) ready made of approved quality turfs side by side without undualation/depressions and ramming the surface complete all as specified and directed.
|
