|
Tender For Detailed Estimate For Facade Lighting Work At Balance Work At Shastri Bridge Prayagraj Detailed Estimate For Facade Lighting Work At Balance Work At Shastri Bridge Prayagraj, 1 SITC of 1000mm long rigid architectural RGBW (W=4000K) LED Linear light with integral driver & housing of Extruded aluminium alloy 6063 grade & die-cast aluminium end caps. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire’s integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminaire can be tilted ±95°. The luminaire shall have silicon glue between optical cover & LED chamber to ensure proper IP66 protection. The fixture shall have 25°X40° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI =80 & shall have SDCM=4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 60 W ( + 5W).Fixture must have operating temperature range of -10°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. Discrete LED make shall be CREE/NICHIA/OSRAM/LUMILEDS or equivalent. The luminaire shall have class I insulation.The luminaire shall be compatible with DMX controller with in built decoder and driver. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The luminaire shall be capable of digital dimming and programming . The bidder should sumbit CE certificate, luminaire BIS certificate.Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling. 2 SITC of Circular shape architectural RGBW (W=4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy - ADC12.The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. . The fixture shall have 3°-3.5°/10°/15°/30°/45°/60° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI =80 for white light & shall have SDCM=4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 105 W ( + 5W). Fixture must have operating temperature range of -10°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. Discrete LED make shall be CREE/NICHIA/OSRAM/LUMILEDS or equivalent. The luminaire shall have class I insulation.The luminaire shall be compatible with DMX controller with in built decoder and driver. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The luminaire shall be capable of digital dimming and programming.the bidder should submit CE certificate, luminaire BIS certificate. Complete in all respect including accessories such as Leader/Jumper cable, connectors, hardware, Packing, forwarding, Handiling. 3 SITC of Compact master Content Program Controller (DMX controller) with capability to control minimum 8 DMX512 universes, playback scenes and animations stored in its SD card, and it can be used for offline scenes scheduling, setting brightness, white balance and playback speed adjustments. It should be able to amplify the DMX signal in cascaded connection & support automatic playback scheduling. It should support power-on startup and scheduled timing start along with capability of unattended operation and remote scene triggering if needed. The Content Program Controller shall have integrated LCD display & support IR remote control. The dimensions of the Content Program Controller shall be approximately 278X193X66 mm (±10%). It should be housed in aluminium casing. The Input voltage shall be 12VDC & shall have 2 RJ45 ports on Input side. The IEC classification shall be Class III. It should operate on DM512 protocol. The output shall have 8 X 3P lockable terminals.The power consumption shall be 8W (±10%). The Content Program Controller shall have one SD card slot for maximum 32GB card & the SD card being used shall be FAT32 format. The Content Program Controller shall come with 220-240V to 12V DC power supply.The IP rating of content program controller shall be IP20 & shall comply to CE, CB & BIS certifications. The working temperature range shall be -10°C to 50°C. The successful bidder shall submit the technical data sheet for approval before supply of material. 4 Planning, Designing, Programming of all the light fixtures with integration into controller and making multiple programming in total of 5 different occasion. Synchronizing all fixtures into one. 5 SITC and fixing of RDM-6 Wall DMX Splitter & Booster is a 6-output DMX/RDM splitter with DMX/RDM, pass-through supporting bi-directional communications Input power DC 12-24V input, 100-240V, 24VDC plug-in power adaptor included power consumption 4.5W max, housing made of polycarbonate, surface mount or DIN-rail mountable, operation temperature 10C- +35C, output six 3-pin terminal socket, connection two piece compression screw terminal, protection Rating IP20, Interior application, Certification CE, BIS. 6 Supply installation commissioning of following sizes of power and data cable as mentioned: 7 3 x 2.5 sqmm Cu unarmored multistrand 8 3 x 4 sqmm Cu unarmored multistrand 9 5 x 6 sqmm Cu unarmored multistrand 10 3.5 x 35 sqmm Al armoured 11 Data cable Cat 6 12 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth. 13 35 sqmm 14 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. 15 6 sqmm 16 35 sqmm 17 Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects 18 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity 19 S&F of 40 Amp. 4 Pole. Isolator 20 S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve 21 Cable Entry Junction Boxes IP66 HENSEL cat RefDK0606 22 Cable Entry Junction Boxes IP66 HENSEL cat RefKF3535 B 23 Synthetic Glands with Lock NutCat ref: 1545.25.17 + 8220.40 24 Supply, installation, testing and commissioning of Fabrication of Stainless steel Cage for protection of Light fixtures. 25 Supply, installation, testing and commissioning of PVC Pipe of size 20 mm as per requirement for cable layingand its protection. 26 Supply, installation, testing and commissioning of PVC Pipe of size 40 mm mm as per requirement for cable layingand its protection. 27 Supply, installation, testing and commissioning of Electrical panel with Servo Bypass swith on incomer having 400 A MCCB with Surge Protection Device for all phases with minimum 8 No outgoing of 63A 4P MCCBA compartment having two switches for safekeeping the controller and other necessary equipments 28 Supply, installation, testing and commissioning of Oil Cooled Servo Stabilizer of 60 KVA Three Phase with Enclosure and connection to the main panel. with rating of 180-250 V stabilizong and maintaining a fixed voltage output of 220Volt for the entire system. 29 Operation and Maintenance for Facade Light With Five years
|
