|
Sodium Vapor Lamp - 100 W Sodium Vapor Lamp, 220V E40 Tubular, Not Reconditioned, Minimum Average Life Of 32,000 Thousand Hours And Minimum Luminous Flux Of 10,900 Lumens, With Procel/Inmetro Energy Efficiency Seal (The Manufacturer Must One Of Those Constants On The Website Www.Eletrobras.Gov.Br/Procel For This Type)., Sodium Vapor Lamp - Sodium Vapor Lamp 150W, 220V, E40 Tubular, Minimum Average Life Of 24,000 Thousand Hours And Minimum Luminous Flux Of 17,500 Lumens, With Procel/Inmetro Energy Efficiency Seal (The Manufacturer Must Be One Of Those Listed On The Website Www.Eletrobras.Gov.Br/Procel For This Type), Sodium Vapor Lamp - 250W Sodium Vapor Lamp, Minimum Average Life Of 24,000 Thousand Hours And Minimum Luminous Flux Of 27,500 Lumens, With Procel/Inmetro Energy Efficiency Seal (The Manufacturer Must Be One Of Those Listed On The Website Www.Eletrobras.Gov.Br/Procel For This Type)., Reactor - 100W Sodium Vapor Reactor - 220V-60Hz-Afp, External Use, Hot Galvanized Mug, With Built-In Ignitor, Maximum Loss 17W, Power Factor 0.92, Maximum T 90°C, With Procel Energy Efficiency Seal (The Manufacturer Must Be One Of Those Constant In The Website Www.Eletrobras.Gov.Br/Procel For This Type)., Reactor - Ballast For 150W- 220V-60Hz-Afp Sodium Steam Luminaires, Maximum Losses 22W, With Procel Energy Efficiency Seal ((The Manufacturer Must Be One Of Those Constants On The Website Www.Eletrobras.Gov.Br/Procel For This Type), Ballast - Ballast For 250W Sodium Vapor Luminaires, 60Hz-Afp, Maximum Losses 30W, Photoelectric Relay - 1000W Type Na Thermal Photoelectric Relay - 220V-60Hz-1800Va (Thermal Type With Delay) Use In Lighting Control Switch ?Nf?, Photoelectric Relay - Photoelectric Relay Type Ii, 105 To 305V, Output Connected At Night With Fail-Off System (In Case Of Relay Failure The Lamps Remain Off) Load Capacity Up To 1000W Resistive, 1800Va/220Vac, With Uncorrected Power Factor (Fp≫0, 5), 500V Corrected (Fp≫0, 5) 500V Corrected (Fp≫0, 92) Contacts Relay When Turned Off Normally Open, Protection Index Ip-67, Polycarbonate Cover Stabilized Against Uv Rays, Polypropylene Polymer Base, Pvc Gasket, 2 To 5 Seconds Delay To Turn On Or Off, Turns On Less Than 10 Lux, Turns Off Less Than 30 Lux, 5000V Surge Voltage On The Mains, Tinned Brass Pins, Operating Temperature Between -5ºc And 50ºc According To Nbr 5123, With A Minimum Lifespan Of 5000 Operations., Luminaire - Public Luminaire Model 80W The Luminaire Must Have: Maximum Power Of 80W ; Initial Luminous Flux (Minimum) Of 13000 Lm; Service Life Of 50000H Or More; Smd Type Led Circuit Board. Passive Heat Dissipation By Natural Convection, Consisting Of A Finned Aluminum Sink. Standard Finish With Corrosion Resistant Electrostatic Painting In Light Gray Color. Automatic Supply Voltage, With Normal Operation For Voltage Values Between 100V And 250V; Correlated Color Temperature (Minimum) 6000K; Operating Temperature From -5°C To 40°C; Color Rendering Index (Cri) Of 70 Or Better; Lifespan 70,000 Hours, For L70; Led Control Driver Incorporated Into The Luminaire Body Itself; Led Control Driver Must Have Protection Degree Ip66 Or Better; Attachment To The Arm Using At Least 3 Stainless Steel Screws; Driver And Dps Easy To Remove/Replace, With Direct Access To The Equipment Compartment Where They Are Stored, Without Harm To Them
|
