|
Tender For Balance Work For Upgradation And Renovation Of Auditorium (Civil Work) At Chhatrapati Shahu Ji Maharaj University, Kanpur (U.P.), 1 Balance Work for Upgradation and Renovation of Auditorium (Civil Work) at Chhatrapati Shahu Ji Maharaj University, Kanpur (U.P.) 2 CIVIL INTERIOR WORK 3 Providing and fixing of 110mm dia pipe 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. Make-Astral/Equivalent 4 Providing and fixing of 110mm 45 Degree Elbow 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. Make-Astral/Equivalent 5 Providing and fixing of 110mm 90 Degree Elbow 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc. Make-Astral/Equivalent 6 ELECTRICAL WORK 7 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit ,with modular switch, modular plate, suitable GI box and earthing the point with1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. One light point with 5 Amp.switch. Group C 8 Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required. 2x1.5 sq mm +1x1.5 sqmm earth wire. 9 Wiring for circuit/ submain wiring along with earth wire with the following size FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit comp. as required. 2x2.5 sq mm +1x2.5 sqmm earth wire. 10 Supply and fixing of ISI marked (IS : 9537 part-2 with latest ammendments) ,PVC Conduit (the class of pipe in concealed / exposed system in wall, ceiling or on floor includingcutting of brick work, laying of conduitand fixing and then plastering with cement, sand motar finished to the level, on floor the conduit shall be covered in PCC 1:2:4 for protection, including cost of threadingof conduit and providing necessary sockets, bends, tees, junction boxes of required sizes and chuck nuts as directed at site by the engineer-in-charge with supply of all material labour and T & P required for proper completion of work. conduit being laid either in concealed system in ceiling slab or wall or on surface or under the frame of false ceiling including flexible conduits or through wooden partition including clamping arrangements as required. 25MM. 11 Supply and fixing of 6Amp to 32Amp SPMCB(10KA) C Curve CAT-A4 Pole Isolator CAT-A 12 Supply and fixing of 63Amp 4 Pole Isolator CAT-A 13 S & F surface/Flush mounting 12ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT-A 14 Supplyof AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required.-Make: Havells-STANDARD -Refresh Air-SPS( 300mm sweep.) 15 Supply of Ceiling Fan with motor of A.C. Permanent insulation capacitor rating confirming BLDC rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated volage 220/240 volts, 50 Hz, 1-ph A.C.the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.(BLDC -1200mm sweep) 16 Supply & Fixing of 36Watt to 46 Watt indoor Recess mounting LED square fitting for Armstrong ceiling having powder coated die cast aluminium housing body with extended heat sink and diffuser of special polycarbonate meterial and driver set complete in all respect. 17 Supply and fixing of 1x22 watt flurocent tube light with all fittings. 18 FIRE FIGHTING & ALARM WORK 19 Providing, laying, testing & Commissioning of"C" class heavy duty MS pipe confirming to IS 1239/3589 i/c fitting like elbows,tee, flanges,tapers, nut bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as support, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia 20 Supplying & fixing ofFire brigade connection of cast iron body with gun metal male instantaneous inlet coupling complete with cap and chain as required. for suitable dia MS pipe connection conforming to IS 904 as required: 2 way-100 mm dia M.S. Pipe 21 EXTERNAL DEVELOPMENT WORK 22 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 60 metres lead as per direction of Engineer - in- charge. 23 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) 24 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) 25 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars 26 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 27 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 28 Providing & applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. 30 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. 31 Providing and fixing of Engineered Wood flooring 15MM Thickrange Solitary collection of Use 23/32 (Heavy Domestic/Domestic) with a Surface Abrasion Resistance of class AC3 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density > 850 Kg/M3) of plank having Uni fitlocking arrangement (lock strength > 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge)Make-Mikasa/Luxe/Armstrong. all complete as per drawing, specification and directionas approved by the Architect/ Engineer -in-Charge. Make-Armstrong,Mikasa,Luxe Equivalent 32 Providing ans fixing of looking edge mirror in drasing room. 33 GST Extra as per applicable
|
