|
Tender For Adventure Activities At Village Ped Tal- Tasgaon, Dist- Sangli- 1 Designing, Providing And Constructing Zipline ( Double Rope Single Way Approx. 220 Mtr ) , Jumaring, Free Fall, Climbing Wall, Rappelling Wall &Operational Equipment Etc. Complete With Following Details–A. Fabrication, Erection, Installation &Painting Of Start Towerof L - 2M, W – 2M, H - 6M With Necessary Base Having Stairs& Required Platform With Foundation &Tie Backupanchor Supports.B. Fabrication, Erection, Installation & Painting Of Landing Towerhaving Provision For Free Fall, Jumaring, Climbing Wall & Rappelling Wall And Start Of Sky Cycle, L - 4M, W – 4M, H - 15M Hight With Stairs With Foundation &Tie Backupanchor Supports.C. Supply And Installation Of Zipline Cable Aircraft Grade Gi Steel Core With Accessories Like U Clamps, Turn Buckles, D-Shackles, Thimble Etc., All Heavy Duty.D. Operational Equipment To Be Includes 10 Sets ( Zipline Pulleys, Helmet, Full Body Harness, Carabiners, Joko ) , Stopping Pulley, Rope Sling 30Mtr, Mitton 3Pair Etc. 2 Designing, Providing And Constructing Climbing Wall &Operational Equipment Etc. Complete With Following Details –A. Size L - 10M * W -2M Supported On Zipline Landing Tower With Ms Frames And Standard Frp Panels With Anchoring System With Imported Climbing Holds 100Nos. B. 6 Sets Of Operation Gear Includes Helmet, Harness, Dynamic Rope 200Mtr, Carabiners 6, Descender 2, Chalk Bag With Chalk 6 Etc. 3 Designing, Providing And Constructing Rappelling Wall &Operational Equipment Etc. Complete With Following Details –A. Size L - 13M * W - 2M Supported On Zipline Landing Tower With Ms Frames And Standard Frp Panels With Anchoring Systemb. 6 Sets Of Operation Gear Includes Helmet, Harness, Static Rope 200Mtr, Carabiners 10, Descender 4, Mitton Pair 6 Etc. 4 Designing, Providing And Constructing Free Fall&Operational Equipment Etc. Complete With Following Details –A. 1 Device Will Be Fixed On The Top Of The Landing Tower Of Zipline On The Cantilever With Extended Platformb. 1 Set Of Operation Gear Includes Helmet, Full Body Padded Harness, Etc. 5 Designing, Providing And Constructing Jumaring ( Ascending ) &Operational Equipment Etc. Complete With Following Details –A. 1 Cantilever On 1 Side Of The Landing Tower Of The Ziplineb. 3 Sets Of Jumar Pair With Rope Slings, 50Mtr Static Rope, 4 Sets Of Harness, Helmet, Carabiner 8, Descender 2, Etc. 6 Designing, Providing And Constructing Human Gyro ( 4 Seater ) &Operational Equipment Etc. Complete.Please Note That 3 Phase Connection Require To Run This Activity. 7 Designing, Providing And Constructing Human Cycle 360 Degree&Operational Equipment Etc. Complete.Please Note That 3 Phase Connection Require To Run This Activity. 8 Designing, Providing And Constructing Bungee Ejection&Operational Equipment Etc. Complete With Following Details –On Each Side Of The Harness Are Elastics, Which Are Connected To Ropes; The Ropes Are Themselves Winding Round An Electrical Hoist. Depending On The Rider’S Weight, The Rider Gives More Or Less Tension To The Elastics. This Allows Riders From 40 To 110 Kg To Ride ( Above 90 Kg, An Additional Elastic Is Necessary ) . Then Elastics Are Given Tension, And The Operator Releases The Rider By Opening The Release Hook. The Rider Is Propelled To A Height That Can Reach 15 Meters. The Turnaround Time Of Each Ejection Is Of 2 Minute To 3 Minute, Which Allows 20 To 25 Riders Per Hour.Please Note That 3 Phase Connection Require To Run This Activity. 9 Designing, Providing And Constructing Trampoline ( 16Ft ) Complete.
|
