|
Procurement Of Rate Contract For Plumbing, Ancillary And Sanitary Repairs And Maintenance Works At Kmio , Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work ) 1 15Mm Nominal Od Pipe., Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work20mm Nominal Od Pipe., Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work ) 25Mm Nominal Od Pipe., Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work ) 25Mm Nominal Od Pipe., Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work 40Mm Nominal Od Pipe., Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work ) 50Mm Nominal Od Pipe., Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work ) 62Mm Nominal Od Pipe., Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work ) 75Mm Nominal Od Pipe., Providing And Fixing Chlorinated Poly Vinyl Chloride ( Cpvc ) Pipes Conforming To Is 15778 Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings, This Includes Jointing Of Pipes And Fittings With One Step Solvent Cement, Trenching, Refilling & Testing Of Joints Complete, ( External Work ) 100Mm Nominal Od Pipe., Making Connection Of G.I. Distribution Branch With G.I. Main Of 50 To 85Mm. Nominal Bore, Including Cutting And Threading The Pipes, Providing And Fixing Tee, Nuts, Labour For All Item Of Works, Testing And Hom Complete As Per Specifications., Providing And Placing On Terrace. Polyethylene Water Storage Tanks As Per Is 12701 : 1996 With Manhole Lid And Suitable Locking Arrangements, Making Holes Of Suitable Diameter For Inlet, Outlet And Over Flow Pipes, Including Cost Of All Materials, Labour, Transport Charges, Hom And Testing Complete As Per Specifications. ( For 1000 Litre Capacity ) Specification ., Pvc Solvent 250Ml., Cpvc Solvent 250Ml., Cpvc 15Mm Coupler. ( Collar ) , Cpvc 15Mm Elbow., Cpvc 15Mm Tee., Cpvc 15Mm Mta., Cpvc 15Mm Fta., Cpvc 15Mm Union., Cpvc 15Mm Tank Connector., Cpvc 15Mm Long Bend., Cpvc 15Mm End Cap., Cpvc 15Mm Gate Valve., Cpvc 15Mm Reducing Elbow., Cpvc 15Mm Reducing Bush., Cpvc 15Mm Reduer. ( T, Bend, Collar, Elbows ) , Cpvc 15Mm Mta Brass., Cpvc 15Mm Fta Brass., Cpvc 15Mm Mta Brass Elbow., Cpvc 15Mm Fta Brass Elbow., Cpvc 20Mm Coupler. ( Collar ) , Cpvc 20Mm Elbow., Cpvc 20Mm Tee., Cpvc 20Mm Mta., Cpvc 20Mm Fta., Cpvc 20Mm Union., Cpvc 20Mm Tank Connector., Cpvc 20Mm Long Bend., Cpvc 20Mm End Cap., Cpvc 20Mm Gate Valve., Cpvc 20Mm Reducing Elbow., Cpvc 20Mm Reducing Bush., Cpvc 20Mm Reduer. ( T, Bend, Collar, Elbows ) , Cpvc 20Mm Mta Brass., Cpvc 20Mm Fta Brass., Cpvc 20Mm Fta Brass Elbow., Cpvc 25Mm Coupler. ( Collar ) , Cpvc 25Mm Elbow., Cpvc 25Mm Tee., Cpvc 25Mm Mta., Cpvc 25Mm Fta., Cpvc 25Mm Union., Cpvc 25Mm Tank Connector., Cpvc 25Mm Long Bend., Cpvc 25Mm End Cap., Cpvc 25Mm Gate Valve., Cpvc 25Mm Reducing Elbow., Cpvc 25Mm Reducing Bush., Cpvc 25Mm Reduer. ( T, Bend, Collar, Elbows ) , Cpvc 25Mm Mta Brass., Cpvc 25Mm Fta Brass., Cpvc 25Mm Fta Brass Elbow., Metal Clamp 20Mm., Metal Clamp 25Mm., Metal Clamp 40Mm., Metal Clamp 50Mm., Metal Clamp 75Mm., Metal Clamp 110Mm., Cpvc 40Mm Coupler. ( Collar ) , Cpvc 40Mm Elbow., Cpvc 40Mm Tee., Cpvc 40Mm Mta., Cpvc 40Mm Fta., Cpvc 40Mm Union., Cpvc 40Mm Tank Connector., Cpvc 40Mm Long Bend., Cpvc 40Mm End Cap., Cpvc 40Mm Gate Valve., Cpvc 40Mm Reducing Elbow., Cpvc 40Mm Reducing Bush., Cpvc 40Mm Reduer. ( T, Bend, Collar, Elbows ) , Cpvc 50Mm Coupler. ( Collar ) , Cpvc 50Mm Elbow., Cpvc 50Mm Tee., Cpvc 50Mm Mta., Cpvc 50Mm Fta., Cpvc 50Mm Union., Cpvc 50Mm Long Bend., Cpvc 50Mm End Cap., Cpvc 50Mm Gate Valve., Cpvc 50Mm Reducing Elbow., Cpvc 50Mm Reducing Bush., Cpvc 50Mm Reduer. ( T, Bend, Collar, Elbows ) , Providing And Fixing 150Mm Dia Ci Sluice Gate Valve Of Approved Make., Providing And Fixing 50Mm Dia Ci Sluice Gate Valve Of Approved Make., Providing And Fixing 100Mm Dia Upvc Gate Valve Of Approved Make., Providing And Fixing 100Mm Dia Ci Coller Of Approved Make., Providing And Fixing 100Mm Dia Fta & Mta Of Approved Make., Providing And Fixing 100Mm Dia Upvc Flange & Solvent & Lubricant Of Approved Make., Providing And Fixing 150Mm M.S Flange Of Approved Make., Providing And Fixing Rubber Washer & Bolt Nets Of Approved Make., Providing And Fixing 50Mm M.S Flange Of Approved Make., Providing And Fixing Rubber Washer & Bolt Nets Of Approved Make., Making150 Mm Dia Core Cutting In Rcc With Hom Complete., , Removing Of Existing Old Or Broken Water Closet Indian / Eurpoean And Disposing It With All Cost And Conveyance Labour For All Items Of Work, Hom With All Lead And Lift, Loading And Unloading, Transportation Charges And All Other Incidental Charges Etc., Complete As Per Specification And Directions Of The Work ., Removing Of Existing Old Or Broken Wash Basin / Urinals And Disposing It With All Cost And Conveyance Labour For All Items Of Work, Hom With All Lead And Lift, Loading And Unloading, Transportation Charges And All Other Incidental Charges Etc., Complete As Per Specification And Directions Of The Engineer – In Charge Of The Work, Providing And Fixing White Vitreous China Clay, Water Closet European Type ( Pedestal Type, P-Trap ) With Black Solid Plastic Seat And Lid, C. P. Brass Hinges, Rubber Buffers. 10 Litre Low Level, P.V.C. Flushing Cistern ( All Are Approved Make ) With Fittings, C.I. / M.S. Brackets, 40Mm Diameter Flush Bend With Fittings And Clamps, Overflow Arrangements With Specials And 25Mm Mosquito Proof Coupling Of Approved Design, Painting Of Fittings And Brackets, Cutting And Making Good The Wall And Floor Wherever Required, Including Cost Of Materials, Labours Complete As Per Specification, Providing & Fixing White Vitreous China Water Closet Squatting Pan ( Indian Type ) Along With "S" Or "P" Trap Including Dismantling Of Old Wc Seat And "S" Or "P" Trap At Site Complete With All Operations Including All Necessary Materials, Labour And Disposal Of Dismantled Material I / C Malba, All Complete As Per The Direction Of Engineer-In Charge.Orissa Pattern W.C Pan Of Size 580X440 Mm, Providing And Fixing Cp Brass Tap Of Approved Quality 15Mm Nominal Bore Including Cost Of All Materials, Labour And Hom Of Equipments With All Leads Complete As Per Specifications., Providing And Fixing 15Mm Dia Pvc Stop Cock Of Approved Make., Providing And Fixing Cpvc Gate Valve Of Approved Quality 40Mm Nominal Bore Including Cost Of All Materials, Labour And Hom Of Equipments With All Leads Complete As Per Specifications., Providing And Fixing 20Mm Dia Ball Valve Of Approved Quality Including Cost Of All Materials, Labour And Hom Of Equipments With All Leads Complete As Per Specifications., Providing And Fixing 25Mm Dia Ball Valve Of Approved Quality Including Cost Of All Materials, Labour And Hom Of Equipments With All Leads Complete As Per Specifications., Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:, Providing And Fixing Cpvc 15Mm Dia Collar, Providing And Fixing 15Mm Dia Nipple., Providing And Fixing C.P. Push Cock Tap Of Dia 15 Mm Approved Quality Conforming To Is Standards, Providing And Fixing Plastic Push Cock Tap Of Dia 15 Mm Approved Quality Conforming To Is Standards, Providing And Fixing Plastic Long Body Tap Of Dia 15 Mm Approved Quality Conforming To Is Standards, Providing And Fixing Plastic Pillar Cock Tap Of Dia 15 Mm Approved Quality Conforming To Is Standards., Providing And Fixing Plastic Short Body Tap Of Dia 15 Mm Approved Quality Conforming To Is Standards ., Providing And Fixing Plastic Health Faucet Of Dia 15 Mm Approved Quality Conforming To Is Standards ., Providing And Fixing Unplasticised P.V.C. Connection Pipe With Ptmt, Nuts, Collar And Bush Of Approved Quality And Colour. 15 Mm Nominal Bore With 45 Cm Length, Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete.Dia 32Mm, Providing And Fixing 15Mm Dia Cp Health Faucet With 1.2Mtr Length Flexible Tube Of Approved Make, Providing And Fixing C.P 15Mm Dia Pillar Cock Of Approved Make, Providing And Fixing Cp Waste Coupling 32Mm Dia Of Approved Make., Providing And Fixing 15Mm Dia Extension Nipple Cp Of 25Mm Length, Providing And Fixing Ptmt Stop Cock Of Approved Quality And Colour 15 Mm Nominal Bore, 86 Mm Long, Weighing Not Less Than 88 G, Providing And Fixing Ptmt Ball Cock Of Approved Quality, Colour And Make Complete With Epoxy Coated Aluminium Rod With L.P. / H.P.H.D. Plastic Ball 25 Mm Nominal Bore, 152Mm Long, Weighing Not Less Than 440 G, Providing And Fixing Of Cp Flange., Providing And Fixing Of Elbow Action Tap., Providing And Fixing Of Long Body Tap. ( Jaugar / Ess / Cera / Hinduware -Or- Any Approved Make ) , Providing And Fixing Of Pillar Cock Tap. ( Jaugar / Ess / Cera / Hinduware -Or- Any Approved Make ) , Providing And Fixing 600X450mm Bevel Lead Edge Mirror Of Superior Glass With 6Mm Hard Board Backing And Fixed To Wooden Cleats With C.P. Crews, Washers, Including Cost Materials, Labor Complete As Per Specifications., Wall Bores In Brick Masonry Upto 45 Cm Thick, , Providing And Fixing Ci Nahani Trap Of Approved Make Conforming To Isi Specifications And Construction Of Cistern In M-15 As Per Directions ( Rate Is Inclusive Of Cost Of Materials And Fixtures And Conveyance Of Materials To Work Spot ) .12.5Cms X 7.5Cms, Providing And Fixing 7.5 Cms To 15.00 Cms Dia Np Grating 100 Mm Dia., Black / White Coloured Solid Plastic Seat With Lid, 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190., Providing And Fixing White Vitreous China Clay, Flat Back Urinal Of Size 590X390mm With C.I. / M.S. Brackets, 32Mm C.P. Brass Waste Of Standard Pattern And Making Good The Wall Wherever Required, Including Cost Of Materials, Labour Complete As Per Specifications., Providing And Fixing Half Pedestal Basins With Single Push Pillar Cock And Waste Coupling ( All Are Approved Make ) Including Cost Of Materials, Labours Complete As Per Specification ( Hindware / Cera Make ) , Providing And Fixing White Vitreous China Clay, Water Closet Italian Collection One Piece With Soild Plastic Seat Lid, 10 Litre Flushing Cistern, Complete. Market Rate. ( Jaugar / Ess / Cera / Hinduware -Or- Any Approved Make ) , Providing And Laying Polished Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing , Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Black, Cherry Red, Brown, Cat Eye, River Pink Or Equivalent., Providing Full Nosing For 20Mm Thick Granite Slab Using Required Machinery Including Cost And Conveyance Of All Materials, Labour For All Items Of Work, Hom Etc., Complete As Per Specification., Making Cuts In The Granite Counter Required For Fixing Wash Basin And Taps As Per The Dimensions, Fixing Of Wash Basin In The Granite Counter With Ms Supports And Other Necessary Accessories, Providing And Fixing Quartz Sink With Single Bowl Of Size 533Mm X 457Mm. ( Carysil Brand / Sera -Or- Any Other Approved Make Only ) , Providing And Fixing White Vitreous China Clay, Italian Wash Basin Of Size 580X460mm With Singale 15Mm C.P. Brass Pillar Tap With C.I / M, .S Brackets, 32Mm C.P. Brass Waste Of Standard Pattern, Complete., Providing And Fixing Of Ss Kitchen Sink Wash Basin Of Size 600X450mmx200 With Singale 15Mm C.P. Brass Pillar Tap With C.I / M, .S Brackets, 32Mm C.P. Brass Waste Of Standard Pattern, Complete., Providing And Fixing 15Mm Shower. ( Jaguar Make ) , Providing And Fixing 40Mm Wash Basin Bottle Trap. ( ( Jaugar / Ess / Cera / Hinduware -Or- Any Approved Make ) , Providing And Fixing Of 10Ltr Flush Tank Mr., Providing And Laying In Position Plain Cement Concrete For Levelling Course For All Works In Foundation. The Granite / Trap / Basalt Crushed Graded Coarse Aggregates And Fine Aggregates As Per Relevant Is Codes Machine Mixed, Laid In Layers Not Exceeding 150 Mm Thickness, Well Compacted Using Plate Vibrators, Including All Lead & Lifts, Cost Of All Materials Of Quality, Labour, Usage Charges Of Machineries, Curing, And All The Other Appurtenances Required To Complete The Work As Per Technical Specifications. ( The Cost Of Steel Reinforcement & Formwork Shall Be Paid Separately ) Mix 1:3:6 ( M10 ) Using 20 Mm Nominal Size Graded Crushed Coarse Aggregates, Disposal Off The Excess Excavated Earth Of All Types By Vehicle Including Loading, Unloading With All Lead And Lifts, Labour, Hom Of Machineries Etc., Providing And Fixing Cp 3- Way -Or- Two In One Taps ( Jaugar / Ess / Cera / Hinduware -Or- Any Approved Make ) Mr, Providing And Fixing Plastic 3- Way -Or- Two In One Taps ( Jaugar / Ess / Cera / Hinduware -Or- Any Approved Make ) Mr, Providing And Fixing Cp Tap Spindles ( Mr ) , Providing And Fixing Urinal Spreaders ( Mr ) , Supplying Wrinch 45 Cms, Supplying Wrinch 60 Cms, Supplying Spanners Full Set 8 Mm To 24 Mm ( Full Set ) , Providing And Fixing Rock Bolts For Fixing Sanitary Fittings Like Wash Basin, Urinals Etc., , Providing & Fixing 20Mm Dia, 1 Mm Thick, Ss Curtain Rods., Providing & Fixing 25Mm Dia. 1 Mm Thick, Ss Curtain Rods., Providing & Fixing 20Mm Dia U Type Ss Curtain Brackets Of Approved Brand And Design., Providing & Fixing 20Mm Dia Ss Curtain Pipe End Cap Of Approved Brand And Design., Providing & Fixing Round Gutta For Brackets Support., Providing And Fixing Of 19Mm Plyboards Of Approved Quality And Approved Make Only. ( Ply Wood / Board Shall Be Of Green Ply / Century Ply / Green Lam / Archid Ply Or Any Approved Make Only ) +B667, Providing And Fixing Of 12Mm Plyboards Of Approved Quality And Approved Make Only. ( Ply Wood / Board Shall Be Of Green Ply / Century Ply / Green Lam / Archid Ply Or Any Approved Make Only ) , Providing And Fixing Of 25 Mm Plyboards Of Approved Quality And Approved Make Only. ( Ply Wood / Board Shall Be Of Green Ply / Century Ply / Green Lam / Archid Ply Or Any Approved Make Only ) +B667, Providing And Fixing Of 1.5Mm Thick, Approved Make And Quality Laminate Only. ( Laminate Shall Be Of Merino / Green Lam / Orchid Ply / Asis Or Any Other Approved Make Only ) ., Fevicol ., Providing And Fixing Of Auto Soft Hinges Of Approved Make And Quality Only., Providing And Fixing Of Door Lock Approved Make And Quality Only., Providing And Fixing Of Ss Coating 6" Handles Of Approved Make., Providing And Fixing Of Cupboard Door Lock Approved Make., Providing And Fixing Of Ss Towerbolt 6"Of Approved Make., Providing And Fixing Of Ss Towerbolt 8"Of Approved Make., Providing And Fixing Of Ss Towerbolt 10"Of Approved Make., Providing And Fixing Sliding Channesl To Drawers Of Approved Quality And Make - 1 Foot Length, Providing And Fixing Sliding Channesl To Drawers Of Approved Quality And Make - 1.50 Foot Length, Providing And Fixing Sliding Channesl To Drawers Of Approved Quality And Make - 2.00 Foot Length, Providing And Fixing Pvc Beadings To Sides Of Wood Of 20Mm Width Etc., Complete., Providing And Fixing Pvc Beadings To Sides Of Wood Of 25Mm Width Etc., Complete., Providing And Fixing Honne / Sal Wood Beadings To Sides Of Wood Of 20Mm Width Etc., Complete., Providing And Fixing Honne / Sal Wood Beadings To Sides Of Wood Of 25Mm Width Etc., Complete., Providing And Fixing Honne / Sal Wood Beadings To Sides Of Wood Of 30 Mm Width Etc., Complete., Providing And Fixing Honne / Sal Wood Beadings To Sides Of Wood Of 40Mm Width Etc., Complete., Providing Honne Wood Frames Of Doors, Windows, Clerestory Windows, Ventilators And Other Frames, Wrought, Framed Or Assembled Including Making Plaster Groves ( Excluding Cost Of Cement Concrete And Side Clamps ) , But Including Cost Of Materials, Labour, Usage Charges Complete As Per Specifications., Fixing Of Door Frame In An Existing Opening Including Embedding Frame In Floor And Walls After Cutting Masonry For Holdfasts For Embedding Holdfast In Cement Concrete 1:3:6 Of 20Mm And Down Size Granite Metal Painting Two Coats Of Coal Tar To Sides Of Frame, Making Good The Damages To Walls And Floor As Required And Disposal Of The Debris With Lead Upto 50 M. Including Cost Of Materials, Labour Charges, Complete As Per Specifications., Providing And Fixing Flush Door Shutter Made Out Of Solid Core Block Board Type, Well Seasoned , Chemicaly Treated Hard Wood Battens And Internal Frame With Minimum 45 Mm Wide Wooden Frame Alround Door Shutters Covered With Cross Bonded Wooden Sheets ( Core Veneer ) Hot Pressed And Fastened On Both Sides Of The Door Useing Liquid Phenol Formaldehyde Resin As Per Is Specifications 2202 ( Part-I ) 1991. From Manufacturer Complete As Per Spcification.-Do- 30 Mm Thick One Side Teak And One Side Commercial . ( Ply Wood Shall Be Of Green Ply / Century Ply / Green Lam / Archid Ply Or Any Approved Make Only ) +B667, Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete., Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm ) , With Necessary Accessories And Screws Etc. Complete., Providing And Fixing Magnetic Catcher Of Approved Quality In Cupboard / Ward Robe Shutters, Including Fixing With Necessary Screws Etc. Complete., Providing & Fixing Of 2.5 Track X 2-Panel Sliding Windows Made Out Of Multi Chambered Upvc ( Matching To Ral-9016 ) Sections And With Minimum Tio2 ( Titanium Dioxide ) At 6Phr With Tpe ( Thermo Plastic Elastomer ) And Lead Free, Gaskets -Grey Colour Having Isolated Drainage And Reinforced With Galvanized Iron Profile Through-Out The Window Frame. The Outer Frame Having An Overall Size Of 81Mm Width X 42Mmheight With Reinforcement Of 1Mm Thickness And Sash With Overall Size Of 31Mm X 57Mm And Mesh Sash Of Size With Gi Reinforcement Of 1.5Mm Thickness. Coextruded Glazing Bead For Fixing Of Glass Shall Be Of Size 21.5Mm X 9.5Mm. Windows Shall Be Provided With 5Mm Plain Float Glass, Standard Hardware& Single Point Locking System With Touch Lock. Wall Thickness Of Frame & Sash Shall Be Of 1.8-2.0Mm. Maximum Possible Size – 1519Mm X 1519Mm ( The Cost Is Inclusive Of All Fixtures And Separate Charges For Minor T&Ps Shall Not Be Made ) , Providing & Fixing Chrome Plated Brass Battery Based Infrared Sensor Operated Pillar Cock, Having Foam Flow Technology., Providing And Fixing Of Plastic Wire Manager 50Mm Of Approved Make Only., Providing And Fixing Is : 12817 Marked Stainless Steel Butt Hinges With Stainless Steel Screws Etc. Complete 125 X64 X1.90Mm, Providing And Fixing Of Ss Coating 10" Handles Of Approved Make., Cleaning Of Structrual Glazing Glasses And Aluminium Composite Panels Provided And Cladded To Front Elevation / Facade Of Buildings At Multi Level Heights With Necessary Chemicals / Cleaning Materials With Necessary Scaffolding / Saftey Gears To The Labourers At Cost And Risk Of The Contractor., Cleaning Of Aluminium / Upvc / Steel Windows With Glass Panes Buildings At Multi Level Heights With Necessary Chemicals / Cleaning Materials At Multi Level Heights With Necessary Scaffolding / Saftey Gears To The Labourers At Cost And Risk Of The Contractor., Removal Of Aluminium Partitions And Stacking At One Place., Repairs To Existing Aluminium Partition Including Glass, Board, Lock, Handle, Beading Etc Cost Of All Material, Labour, Complete As Per Specifications., Providing And Fixing American Handle 150Mm Long., Providing And Fixing Aluminium Lock 150Mm Long., Providing And Fixing Of Aluminium Window Star Lock., Providing And Fixing Of Aluminium Glazing Clips ., Providing And Fixing Of Aluminium Glazing Plate ., Aluminium T Or L Sections., Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) :For Fixed Portion :Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron ) Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications., Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In- Charge: Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications., Providing And Fixing In Position 12Mm Thick Plaster Of Paris ( Gypsum Anhydrous ) For Ceiling Reinforced With Hessian Cloth Flat Surface With Ceiling Tiles Up To A Height Of 5 M Above Floor Level Over Aluminium Strips 25Mm X 6Mm And Rendered Smooth With Plaster Of Paris Including Cost Of Materials, Labour, Curing Complete As Per Specifications., 12.5 Mm Thick Square Edge Pvc Laminated Gypsum Tile Of Size 595X595 Mm, Madeof Gypsum Plasterboard, Manufactured From Natural Gypsum As Per Is 2095 Part I And Laminated With White 0.16Mm Thick Fire Retardant Pvc Film On The Face Side And 12Micron Metalized Polyester On The Back Side With All Edges Sealed With The Face Side Pvc Film Which Goes Around And Wraps The Edges And Is Bonded To The Edges And The Back Side Metalized Polyester Film So As To Make The Tile A Completely Sealed Unit., Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) , Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 500X500 Mm ., Providing And Fixing Of Aluminium Composite Panel Of Approved Make And Colour For Wall Cladding For Brick / Rcc / Stone Walls & Coloumns / Beams With Necessary Aluminium Frame Works At Required Level Made Out Of 50X25x4mm C Section Or Equivalent. The Panel Should Consist Of 3Mm Thick Non-Halogenated Fr Grade Mineral Based Polymer ( 2 Hrs Fire Resistance As Per Astm E119-12 And Clause B, S1, Do As Per Ent 13501-1Sandwiched Between 0.50 Skins Thick Aluminium Sheet Making A Total Panel Thickness Of 4Mm. The Surfaces Will Be Finished With Pvdf Based Coating On Topsides And Service Coating On Reverse Sides Would Be In Polyester Paint. The System Shall Be Fixed Using Gi Brackets, Aluminium L Cleats And Stainless Steel Bolts And Nuts Complete With Spring Washer And Cap Nuts And All Other Necessary Accessories, Sealing Shall Be Done With Necessary Rods Etc., Complete., Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With : 5.5 Mm Thick Glass Panes Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge., Providing And Fixing Stainless Steel ( Ss 304 Grade ) Adjustable Friction Windows Stays Of Approved Quality With Necessary Stainless Steel Screws Etc. To The Side Hung Windows As Per Direction Of Engineer-In- Charge Complete.:510 X 19 Mm Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge., 18.2 Designing, Fabricating, Testing, Protection, Installing And Fixing In Position Semi ( Grid ) Unitized System Of Structural Glazing ( With Open Joints ) For Linear As Well As Curvilinear Portions Of The Building For All Heights And All Levels, Including: ( A ) Structural Analysis & Design And Preparation Of Shop Drawings For The Specified Design Loads Conforming To Is 875 Part Iii ( The System Must Passed The Proof Test At 1.5 Times Design Wind Pressure Without Any Failure ) , Including Functional Design Of The Aluminum Sections For Fixing Glazing Panels Of Various Thicknesses, Aluminium Cleats, Sleeves And Splice Plates Etc. Gaskets, Screws, Toggles, Nuts, Bolts, Clamps Etc., Structural And Weather Silicone Sealants, Flashings, Fire Stop ( Barrier ) -Cum-Smoke Seals, Microwave Cured Epdm Gaskets For Water Tightness, Pressure Equalisation & Drainage And Protection Against Fire Hazard Including: ( B ) Fabricating And Supplying Serrated M.S. Hot Dip Galvanised / Aluminium Alloy Of 6005 T5 Brackets Of Required Sizes, Sections And Profiles Etc. To Accommodate 3 Dimentional Movement For Achieving Perfect Verticality And Fixing Structural Glazing System Rigidly To The Rcc / Masonry / Structural Steel Framework Of Building Structure Using Stainless Steel Anchor Fasteners / Bolts, Nylon Seperator To Prevent Bimetallic Contacts With Nuts And Washers Etc. Of Stainless Steel Grade 316, Of The Required Capacity And In Required Numbers. ( C ) Providing And Filling, Two Part Pump Filled, Structural Silicone Sealant And One Part Weather Silicone Sealant Compatible With The Structural Silicone Sealant Of Required Bite Size In A Clean And Controlled Factory / Work Shop Environment, Including Double Sided Spacer Tape, Setting Blocks And Backer Rod, All Of Approved Grade, Brand And Manufacture, As Per The Approved Sealant Design, Within And All Around The Perimeter For Holding Glass. ( D ) Providing And Fixing In Position Flashings Of Solid Aluminium Sheet 1 Mm Thick And Of Sizes, Shapes And Profiles, As Required As Per The Site Conditions, To Seal The Gap Between The Building Structure And All Its Interfaces With Curtain Glazing To Make It Watertight. ( E ) Making Provision For Drainage Of Moisture / Water That Enters The Curtain Glazing System To Make It Watertight, By Incorporating Principles Of Pressure Equalization, Providing Suitable Gutter Profiles At Bottom ( If Required ) , Making Necessary Holes Of Required Sizes And Of Required Numbers Etc. Complete. M2 1, 835.00 This Item Includes Cost Of All Inputs Of Designing, Labour For Fabricating And Installation Of Aluminium Grid, Installation Of Glazed Units, T&P, Scaffolding And Other Incidental Charges Including Wastages Etc., Enabling Temporary Structures And Services, Cranes Or Cradles Etc. As Described Above And As Specified. The Item Includes The Cost Of Getting All The Structural And Functional Design Including Shop Drawings Checked By A Structural Designer, Dully Approved By Engineer-In- Charge. The Item Also Includes The Cost Of All Mock Ups At Site, Cost Of All Samples Of The Individual Components For Testing In An Approved Laboratory, Field Tests On The Assembled Working Structural Glazing As Specified, Cleaning And Protection Till The Handing Over Of The Building For Occupation. In The End, The Contractor Shall Provide A Water Tight Structural Glazing Having All The Performance Characteristics Etc. All Complete As Required, As Per The Architectural Drawings, As Per Item Description, As Specified, As Per The Approved Shop Drawings And As Directed By The Engineer- In-Charge., Providing And Fixing Glass Panes Of 4 Mm Thick With Necessary Beadings Aluminium To Partitions And Windows Etc., Complete., Providing And Fixing Glass Panes Of 6 Mm Thick With Necessary Beadings Aluminium To Partitions And Doors Etc., Complete., Providing And Fixing Tougnned Glass Panes Of 10Mm Thick With Necessary Beadings Aluminium To Partitions And Doors Etc., Complete., Providing And Fixing Tougnned Glass Panes Of 12Mm Thick With Necessary Beadings Aluminium To Partitions And Doors Etc., Complete., Providing And Fixing Anti Bird Nets With Necessary Clamps Etc., Complete., Providing Hemp Joints To The Ci Pipe Lines And Valve Joints With Necessary Hemps, Cement Etc., Complete., Providing And Fixing Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Seamless Type Tubes Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge., Tap Washers, Syphon Washers, Providing And Laying 100Mm Thick Pre-Cast Cover Slabs Over Rain Water Harvesting Pit Of Width Not Exceeding 1000 Mm Using M20 Concrete Reinforced With Tmt Bars Fe 500 @ 6Kg / M2, Slabs Jointed In Cm 1:3 Proportion And Nicely Finished Including Providing Holes In The Cover Slabs Wherever Necessary For Easy Drainage Of Surface Water Including Of Labour, Materials, Scaffolding, Usage Of Machinery, Curing, Lead And Lift Charges Etc, Complete., Taking Out Existing Wooden Door Shutter, Repair By Cutting, Painting Etc. And Refixing Of Repaired Door Shutters To Existing Door Frames, Including Replacement Of Hinges With Screws, Etc. As Required, All Complete As Per The Direction Of The Engineer-In-Charge., Mason Or Brick Layer Class-1, Mason Or Brick Layer Class-2, Providing And Fixing 25Mm Water Flow Meter. ( M.R ) , Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Acting Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-In-Charge ( Door Handle, Lock And Stopper Etc. To Be Paid Separately ) Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge., Providing And Fixing Top & Bottom Pivot & Double Acting Hydraulic Floor Spring Type Of Approved Make., Providing And Fixing Of Ss Coating 1 Handles Of Approved Make., Providing And Fixing Of Glass Door Lock Approved Make., Providing And Fixing Of Aluminium Fish Mouth Glass Section, Standard Length 3.66 Mtr, Channel.Aluminium Interlocking Glass Section Finish With Anodized Silver Matt, , Providing And Fixing Of Sliding Wheel For Glass Door., Providing And Fixing Of Aluminium Sliding Channel For Glass Door., Cutting Or Road Surface For Pipeline Trenches And Disposing Of The Excavated Stuff As Directed Including Barricading, Danger Lighting Etc, In The Macadam Road, Including Cost Of Materials, Labour, Hom Complete As Per Specifications., Cutting Or Road Surface For Pipeline Trenches And Disposing Of The Excavated Stuff As Directed Including Barricading, Danger Lighting Etc, In The Asphalt Surface Road, Including Cost Of Materials, Labour, Hom Complete As Per Specifications., Cutting Or Road Surface For Pipeline Trenches And Disposing Of The Excavated Stuff As Directed Including Barricading, Danger Lighting Etc, In The Cement Concrete Road, Including Cost Of Materials, Labour, Hom Complete As Per Specifications, Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge., Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge., Earth Work In Surface Excavation For Stripping, Seating Of Bund, Road Way By Manual Means For Lowering & Levelling The Ground For All Works Other Than Foundation & Depth In Ordinary Rock And Soft Rock Upto 300Mm Depth As Per Drawing And Technical Specifications, Including Setting Out, Barricading, Caution Lights, Including Dressing Of Excavated Surfaces, Disposing Off Or Levelling The Excavated Stuff Or Sorting & Stacking The Selected Stuff For Reuse In A Radius Of 50 M And Lift Upto 1.5 M Including Cost Of Labour, Tools, Usage& Other Appurtenances Required To Complete The Work- Do-In Hard Soil., Refilling Available Earth Around Trenches / Pipelines, Cables In Layers Not Exceeding 20 Cms In Depth, Compacting Each Deposited Layer By Ramming After Watering With A Lead Upto 50 M , And Lift Upto 1.5 M. Including Cost Of All Labour Complete As Per Specifications, Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge.In Cement Mortar ., Removing Of Existing Old Sanitary And Plumbing Pipelines, Stacking And Disposing It With All Cost And Conveyance Labour For All Items Of Work, Hom Of Equipment With All Lead And Lift, Loading And Unloading, Transportation Charges And All Other Incidental Charges Etc., Complete As Per Specification And Directions Of The Work, Pumping Out Water Caused By Springs, Tidal Or River Seepage, Broken Water Mains Or Drains And The Like ., Dismantling The Damaged Or Collapsed Machinehole , Conical In Shape, And Reconstructing The Same For The Same Dimensions, With Machine Made Wire Cut Brick In Cm 1:4 With Ordinary Portland Cement Etc. As Per Design And Specifications. The Existing Ring, Cover And Cc Beeding To Be Used. For 1.2M Dia For Machinehole Of 1.2M Dia And 2.0 M Depth, ‘Repairs To Machinehole For Different Depths Including Removal Of Debris, Levelling The Brick Masonry, Construction Of Brick Masonry Upto Ground Level, Providing Cc Coping Alround The Mh Cover, Plastering Both Inside And Outside To The Brick Masonry And Fixing Of Manhole Frame And Cover, Curing, Refilling With Appurtenances Complete. Upto 0.90 M Depth, Providing And Installing At Site Of Work P.V.C. Pipes Including Cost Of Pipes And Specials And Labour, Including Lowering Into Trenches, Laying True To Line, Level And Perfect Linking At Joints Leak Proof Including Jointing Of Approved Type With All Labour Charges And All Lift Charges, Handling Charges Including Encasing The Pipe Around To A Depth Not Less Than 15 Cms With Gravel Or Selected Earth Available From The Excavation Etc. Complete. 10 Kg / M2: 63Mmpg No:140, , Providing And Installing At Site Of Work P.V.C. Pipes Including Cost Of Pipes And Specials And Labour, Including Lowering Into Trenches, Laying True To Line, Level And Perfect Linking At Joints Leak Proof Including Jointing Of Approved Type With All Labour Charges And All Lift Charges, Handling Charges Including Encasing The Pipe Around To A Depth Not Less Than 15 Cms With Gravel Or Selected Earth Available From The Excavation Etc. Complete. 10 Kg / M2 75Mm Sor Code -M150w V-V, Providing And Installing At Site Of Work P.V.C. Pipes Including Cost Of Pipes And Specials And Labour, Including Lowering Into Trenches, Laying True To Line, Level And Perfect Linking At Joints Leak Proof Including Jointing Of Approved Type With All Labour Charges And All Lift Charges, Handling Charges Including Encasing The Pipe Around To A Depth Not Less Than 15 Cms With Gravel Or Selected Earth Available From The Excavation Etc. Complete. 10 Kg / M2 90Mm, It No:15.2 Sor Code -M150x V-V Sr 2021-22, Providing And Installing At Site Of Work P.V.C. Pipes Including Cost Of Pipes And Specials And Labour, Including Lowering Into Trenches, Laying True To Line, Level And Perfect Linking At Joints Leak Proof Including Jointing Of Approved Type With All Labour Charges And All Lift Charges, Handling Charges Including Encasing The Pipe Around To A Depth Not Less Than 15 Cms With Gravel Or Selected Earth Available From The Excavation Etc. Complete. 10 Kg / M2 110Mm, It No:15.3 Sor Code -M150y V-V Sr 2021-22, Providing And Installing At Site Of Work P.V.C. Pipes Including Cost Of Pipes And Specials And Labour, Including Lowering Into Trenches, Laying True To Line, Level And Perfect Linking At Joints Leak Proof Including Jointing Of Approved Type With All Labour Charges And All Lift Charges, Handling Charges Including Encasing The Pipe Around To A Depth Not Less Than 15 Cms With Gravel Or Selected Earth Available From The Excavation Etc. Complete. 10 Kg / M2 140Mm, It No:15.4 Sor Code -M150z V-V, Providing And Installing At Site Of Work P.V.C. Pipes Including Cost Of Pipes And Specials And Labour, Including Lowering Into Trenches, Laying True To Line, Level And Perfect Linking At Joints Leak Proof Including Jointing Of Approved Type With All Labour Charges And All Lift Charges, Handling Charges Including Encasing The Pipe Around To A Depth Not Less Than 15 Cms With Gravel Or Selected Earth Available From The Excavation Etc. Complete., Providing And Installing At Site Of Work P.V.C. Pipes Including Cost Of Pipes And Specials And Labour, Including Lowering Into Trenches, Laying True To Line, Level And Perfect Linking At Joints Leak Proof Including Jointing Of Approved Type With All Labour Charges And All Lift Charges, Handling Charges Including Encasing The Pipe Around To A Depth Not Less Than 15 Cms With Gravel Or Selected Earth Available From The Excavation Etc. Complete. 10 Kg / M2 200Mm, Labour Charges For Attending To Repairs To The Pvc Pipes By Earth Work Excavation Cutting The Old Pipe Installation And Jointing Of New Pipes To The Existing Old Pipe To The Depth And Line, Level And Perfect Linking At Joints Including Encasing The Pipes Alround To A Depth Of Not Less Than 15Cms With Earth Available Including Cost Of All Labour, Hire Charge Of Equipment, Refilling The Excavated Trenches Compacting, Finishing Neatly By Giving Satisfactory Hydraulic Test Etc., Complete For 63Mm ( 0.075 ) To 315Mm ( 0.787 ) :, 25Mm Dia Pvc Couplers., 32Mm Dia Pvc Couplers., 40Mm Dia Pvc Couplers, 50Mm Dia Pvc Couplers., 63Mm Dia Pvc Couplers., 75Mm Dia Pvc Couplers., 90Mm Dia Pvc Couplers., 110Mm Dia Pvc Couplers., 140Mm Dia Pvc Couplers., 160Mm Dia Pvc Couplers., 180Mm Dia Pvc Couplers., 200Mm Dia Pvc Couplers., 25Mm Dia Pvc Elbows., 32Mm Dia Pvc Elbows., 40Mm Dia Pvc Elbows., 50Mm Dia Pvc Elbows., 63Mm Dia Pvc Elbows., 75Mm Dia Pvc Elbows., 90Mm Dia Pvc Elbows., 110Mm Dia Pvc Elbows., 140Mm Dia Pvc Elbows., 160Mm Dia Pvc Elbows., 180Mm Dia Pvc Elbows., 200Mm Dia Pvc Elbows., 25Mm Dia Pvc Bend., 32Mm Dia Pvc Bend., 40Mm Dia Pvc Bend., 50Mm Dia Pvc Bend., 63Mm Dia Pvc Bend., 75Mm Dia Pvc Bend., 90Mm Dia Pvc Bend., 110Mm Dia Pvc Bend., 140Mm Dia Pvc Bend., 160Mm Dia Pvc Bend., 180Mm Dia Pvc Bend., 200Mm Dia Pvc Bend., 25Mm Dia Pvc Tee., 50Mm Dia Pvc Tee., 75Mm Dia Pvc Tee., 90Mm Dia Pvc Tee., 90Mm Dia Pvc Tee., 25Mm Dia Pvc Reduer. ( T, Bend, Collar, Elbows ) , 50Mm Dia Pvc Reduer. ( T, Bend, Collar, Elbows ) , 75Mm Dia Pvc Reduer. ( T, Bend, Collar, Elbows ) , 90Mm Dia Pvc Reduer. ( T, Bend, Collar, Elbows ) , 90Mm Dia Pvc Reduer. ( T, Bend, Collar, Elbows ) , 15Mm Dia Gi Plugs., 20Mm Dia Gi Plugs., 25Mm Dia Gi Plugs., 32Mm Dia Gi Plugs., 40Mm Dia Gi Plugs., 50Mm Dia Gi Plugs., 62Mm Dia Gi Plugs., 80Mm Dia Gi Plugs., 110Mm Dia Gi Plugs., 50 Mm Dia Gm ( Copper Alloy ) Wheel Valves / Check Valve, 65 Mm Dia Gm ( Copper Alloy ) Wheel Valves / Check Valve., 80 Mm Dia Gm ( Copper Alloy ) Wheel Valves / Check Valve., 100 Mm Dia Gm ( Copper Alloy ) Wheel Valves / Check Valve., Removing The G.I. Pipes, Cleaning, Washing And Using At Spot Or Conveying From Workspot To Office / Store With All Lead And Lift Including Removal Of All Items Such As Collars, Elbows, Tees, Bends, Gland Cocks, Cuts And Threads With Appurtenances Pipes Of Dia 15Mm To 25Mm., Removing The G.I. Pipes, Cleaning, Washing And Using At Spot Or Conveying From Workspot To Office / Store With All Lead And Lift Including Removal Of All Items Such As Collars, Elbows, Tees, Bends, Gland Cocks, Cuts And Threads With Appurtenances Pipes Of Dia 32Mm To 80Mm, Removing The G.I. Pipes, Cleaning, Washing And Using At Spot Or Conveying From Workspot To Office / Store With All Lead And Lift Including Removal Of All Items Such As Collars, Elbows, Tees, Bends, Gland Cocks, Cuts And Threads With Appurtenances Pipes Of Dia 100Mm, Constructing Brick Masonry Chamber Of Internal Dimension 600X600mm And Depth Of 600Mm ( Inner Dimensions ) With Modular Bricks Of Cd 75 In Cement Mortar 1:6, Bed Concrete 150Mm Thick With 1:3:6, Plastering 12 Mm Thick With Cement Mortar 1:4, Cc 1:2:4 Coping 75Mm Thk For Fixing Ci Cover & Frame Etc. Excluding The Cost Of Ci Frame And Cover, Providing And Constructing “Wire Cut Brick Man Hole Chambers” Using Portland / Pozzolana Cement, Conical In Shape At Top, With Cc 1:3:6 Foundation Using 40Mm And Down Size Graded Metal Of Approved Quality And With An Offset Of 0.15M Alround The Chamber. Construct Brick Masonry In Cm 1:4, 340 Mm Thick, With Wirecut Bricks Of Approved Quality, Plaster Inside And Out Side With Cm 1:3, 12Mm Thick, Except For The Conical Surface Outside Where The Plaster Thickness Shall Be 20Mm. Slope Inside To Be 1:6 In The Concrete Towards Central Drain And Finished Smooth. Fixing Of Pipes In Cc 1:2:4 With Graded Metal Of 20Mm And Down Size. Supplying And Fixing Sfrc Machinehole Frame And Cover ( Heavy Duty ) Conforming To Is:12592 With Latest Amendment, In Cc 1:2:4. Supplying And Fixing Footsteps Made Of 12Mm Dia. Steel Bars ( Fe-500 ) With 3Mm Thick Plastic Encapsulation ( Is-10910 ) . The Footsteps Shall Be Fixed 30Cms Apart And On Cc Block Embeded To Masonry Wall. The Whole Works Include Watering, Curing, Barricading, Danger Lighting, Pouring Tar Over Mh Frame And Cover, Cost Of Tar, Shoring, Strutting, Dewatering, Engraving Machinehole Number With Flow Direction On The Inner Conical Surface Etc. As Per The Drawing Etc. As Per Technical Specifications And For The Following Diameters And Depth Etc. For 1.2Mm Diacirc. B M.H Constructing Brick Masonry Circular Machinehole 1.2 M Internal Dia 1.5M Depth & Sfrc Cover & Frame, Providing And Constructing “Wire Cut Brick Man Hole Chambers” Using Portland / Pozzolana Cement, Conical In Shape At Top, With Cc 1:3:6 Foundation Using 40Mm And Down Size Graded Metal Of Approved Quality And With An Offset Of 0.15M Alround The Chamber. Construct Brick Masonry In Cm 1:4, 340 Mm Thick, With Wirecut Bricks Of Approved Quality, Plaster Inside And Out Side With Cm 1:3, 12Mm Thick, Except For The Conical Surface Outside Where The Plaster Thickness Shall Be 20Mm. Slope Inside To Be 1:6 In The Concrete Towards Central Drain And Finished Smooth. Fixing Of Pipes In Cc 1:2:4 With Graded Metal Of 20Mm And Down Size. Supplying And Fixing Sfrc Machinehole Frame And Cover ( Heavy Duty ) Conforming To Is:12592 With Latest Amendment, In Cc 1:2:4. Supplying And Fixing Footsteps Made Of 12Mm Dia. Steel Bars ( Fe-500 ) With 3Mm Thick Plastic Encapsulation ( Is-10910 ) . The Footsteps Shall Be Fixed 30Cms Apart And On Cc Block Embeded To Masonry Wall. The Whole Works Include Watering, Curing, Barricading, Danger Lighting, Pouring Tar Over Mh Frame And Cover, Cost Of Tar, Shoring, Strutting, Dewatering, Engraving Machinehole Number With Flow Direction On The Inner Conical Surface Etc. As Per The Drawing Etc. As Per Technical Specifications And For The Following Diameters And Depth Etc. For 1.2Mm Diacirc. B M.H Constructing Brick Masonry Circular Machinehole 1.2 M Internal Dia 2M Depth & Sfrc Cover & Frame, Dewatering The Sewage / Storm Water By Using Reqired Hp Submersible Pump For The Diversion Of Storm / Sewage During The Execution Of Work. Considering For One Pump 5 Hp Pump, Desilting Of Sewerlines By Mechanical ( Jetting, Sucking, Grabber, Scr Apper Etc., ) Means , Setting Up The Over Pumping Arrangements, Rodding And Dislodging Of Accumulative Silt From The Pipeline , Removal Of Silt By Mechanical Means To The Ground Including Barricading, Cleaning Of Sewers And Machinhole, Disposal Of Removed Silt Upto A Distance Of 20 Kms, Necessary All Complete As Per The Instructions Of The Engineer-In Charge. Above 300Mm Upto 600Mm Dia, Providing, Filling And Laying Of Sand Bags Filled With Sand / Clay For Diversion Of Sewage During Execution Of Work., Deduct For Cleaning Sewer Line By Using Bamboo Sticks & / Or Pull-Through-Rods Instead Of By The Rodding Equipment., Providing & Fixing 455X610 Mm Cast Iron Cover With Frame Weight To Be Not Less 38Kgs ( Weight Of Cover 23 Kgs And Weight Of Frame 15 Kgs ) And Necessary Locking Arrangements With M.S Flats 32X6 Mm Etc & Painting With Two Or More Coats With Black Japan Paint Etc. Complete As Directed By The Engineer-In-Charge, White Cement, Providing And Fixing Rcc Chamber Covers Of Thickness 75 Mm Thickness With Necssary Frame Reinforcements And Handles Etc., Complete Of Size 600Mm X 600 Mm., Providing And Fixing Rcc Chamber Covers Of Thickness 75 Mm Thickness With Necssary Frame Reinforcements And Handles Etc., Complete Of Size 450Mm X 450 Mm., Providing And Fixing Rcc Man Hole Covers Of Thickness 75 Mm Thickness With Necssary Frame Reinforcements And Handles Etc., Complete Of Size 900 Dia Mm.
|
