|
Tenders Are Invited For Supplying Longitudinal Welding And Cnc Laser Cutting Machines Supply, Install And Commissioning Of Lazer Cnc Cutting Machine 1500Watt, Per Attached Technical Specifications And Features. 1)Application To Cut Carbon Steel, Stainless Steel, 2)Maximum Metal Thickness Is 4 Mm 3)High Rigidity Enhanced Aviation Gantry(Welded Heavy Duty Machine Frame) 4)High Optical Power Conversion Efficiency Of The Fiber Laser (Above 30 %)And Lower-Power Consumption Is Preferable. 5)No Reflective Lens Is Required 6)Minimum Heat Effected Zone And Smooth Cutting Surface Without Burrs 7)High-Quality Rack And Pinion Guide Rails From (Japan, France, Germany) 8)Professional Laser Cutting Software With Graphic Layout And Sharp Corner Smoothing Functions, Fast Piercing & Cutting Via Servodrive. 9)Error Detection, Diagnosis &Solution, And Automatic Search Edge Function. 10)Memory Cuttingonce Power Off Suddenly With Emergency Stop As- One Of Safety Features 11)Scan Cutting, Short Distance Cutting Without Head Lifting 12) Working Area Dimensions Within 3000*1500Mmas 13) X, Y, Stroke Within Range Of 1500 And 3000 Mm 14) X, Y, Positioning Accuracy Within 0.05 Mm 15) Re-Positioning Accuracy Is 0.03 Mm 16) High Steady, High-Quality Source(Stability) Laser Source 17) Laser Source Power: 1500 W 18) High Quality Laser Cutting Head, Ce Certified 19) Xyz Servo Motors: Schneider Or Delta 20) Control Box, BoardEtc. From Schneider Or Siemens And Industrial Cpu Included 21) High Quality Speed Reducer Brand: (Japan, Eu, Usa) 22)Include Machine Bed,Efficient Water Chiller (Comply With High Ambient Areas), Pc, Stabilizer, Air Compressor, Cooling System. 23)Include Consumables For Laser Cutting Machine: Protective Lens,Nozzles, Rf Cable, Ceramic Ring 24)Power Supply: 3-Phase, 380V, Frequency 50/60Hz, Ip65 25)Expected Useful Working Hours Not Less Than 100,000 Hr 26)Machine Body To Handle 300- 400Kg Work Pieces 1 Set 2 Supply, Install And Commissioning Of Longitudinal Welding Machine: 1.Base Material: Stainless Steel, Carbon Steel, Aluminum Alloy, Heat Resisting Alloy, Titanium Alloy And Others 2.Form Of Workpiece: Cylindrical, Conical, Boxlike, Laminar Etc. 1 Set Dceo-Bag-Tech-2022-011 Page 7 Of 11 Globalqms Id: 879.6, 3 March 2021 3.Welding Process: Automatic Welding System With Tig/Mig/Mag/Paw/Saw Or Other Welding Source And Torch. 4.Central Alignment (Pneumatic & Laser) 5.Maximum Welding Current For The Machine Is 350 Am. 6.It Adopts Cantilever Type, And It Is Mainly Composed Of Frame, Fingers-Type Clamping Unit, Water-Cooling Mandrel, Travelling Carriage, Crossing Slider, Wire Feeder And Torch By Motor Driven Is Preferable. 7.Drive System: Ac Precision Stepper Motor Or Servo Motor 8.Torch Adjustable Range: Y: ±30Mm, Z: ±30Mm 9. Travel Accuracy 0.2 Mm/M 10.Transmission Mode: Guide Rail Gear And Rack 11. High-Quality, Low-Deformation Linear Welds 12.Stepless Speed Control 13.Control: Siemens Or Same Quality 14.Operator Panel: Siemens Panel Or Equivalent, Color Display 15.Motor: Schneider Electric Or Equivalent 16.Ambient Temperature -10 C To 50-55 C 17.Inside Welding Material Diameter :750 Mm 18.Welding Speed: 0-200 Mm/M 19.Welding Form Can Be Preset, Storing, And Transferring. Through The Man-Machine Interface Can Easily Change The Parameter And State Transition. 20.Welding Length 1500 Mm 21.Work Piece Diameter100~850 Mm 22.Work Piece Thickness 0.5~6.0Mm 25.Main Locking: Pneumatic Or Hydraulic 26.Clamping: With 2-Foot Pedal (Pre-Clamping Available) For Both Side 27.With Chiller Cooling System 28.Copper Back Up Length 1575 Mm 29: Welding Eye Shielding Glass: Available 30: Mig Welding Machine 250 A Offer Deadline And Protocol: Offers Must Be Received No Later Than 5:00 Pm Local Baghdad Time On August 1St, 2022 By Email To Tenders@Iraqdceo.Com Please Reference The Rfq Number In Any Response To This Rfq. Offers Received After The Specified Time And Date Will Be Considered Late And Will Be Considered Only At The Discretion Of Chemonics. 3. Questions: Questions Regarding The Technical Or Administrative Requirements Of This Rfq May Be Submitted No Later Than 5:00 Pm Local Baghdad Time On July 25Th,2022 By Email To Dceoprocurement@Iraqdceo.Com. Questions And Requests For ClarificationAnd The Responses TheretoThat Chemonics Believes May Be Of Interest To Other Offerors Will Be Circulated To All Rfq Recipients Who Have Indicated An Interest In Bidding. Only The Written Answers Issued By Chemonics Will Be Considered Official And Carry Weight In The Rfq Process And Subsequent Evaluation. Any Verbal Information Received From Employees Of Chemonics, Or Any Other Entity Should Not Be Considered As An Official Response To Any Questions Regarding This Rfq. Tender Link :
|
