|
Article No. Sp110-3802010 A Mechanical Device With A Dial Indicator And A Counter Trip Meter. Drive Type: Mechanical, Carried Out Through A Flexible Shaft (Cable) From The Transfer Case. Cable Length: The Standard Flexible Shaft Has A Length Of 4800 Mm. Speed Scale: Marked Up To 120 Km/H Functions: Indication Of Current Driving Speed Accounting For The Total Mileage Of The Car (Odometer) The Device Is Installed On The Drivers Instrument Panel The Device Is Designed For Operation In A Wide Range Of Temperatures And High Humidity. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Fuel Tap, Article No. 4310-1104350 Type – Multi-Pass Cork Housing Material: High-Strength Brass Alloy Or Cast Aluminum Control Type – Manual Working Pressure – Up To 0.6 Mpa Frost Resistance, Maintaining The Mobility Of The Cork And The Elasticity Of The Seal At Temperatures Down To -60C Wear Resistance Seals Must Be Made Of Fluorine Rubber Or Special Petrol And Oil Resistant Rubber Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Starter St-142B, Article No. St-142B – 3708000 This Is A Powerful Dc Electric Motor With Electromagnetic Excitation And A Ratchet Drive Mechanism. Rated Voltage - 24 V Rated Power – 8.2 Kw Battery Capacity – 190 Ah Number Of Gear Teeth - 10 Gear Module - 3.75 Mm Tooth Profile Angle – 20 Degrees Weight 24.5-25.2 Kg Drive Type – Mandatory Freewheel Ratchet Mechanism (Bendix) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Injection Pump Repair Kit For Kamaz-7403 Engine, Article No. 337.1111005-40 The Kit Includes 3 Groups: 1) Plunger Pairs - 8 Pcs. 2) Discharge Valves - 8 Pcs. Plunger Diameter 9 Mm 3)Sealing Elements – Full Set Of Rubber Rings, Cover Gaskets, Section Seal, Shaft Seal 4) Elements Of The Corrector And High-Pressure Pump; Pressure Corrector Membrane; Pumping Repair Kit “Valve, Springs”; Copper Washers Rubber Rubber Material - Oil, Petrol-Resistant Rubber, (Fluorine Rubber) Resistant To Aggressive Components, Precision Accuracy - Plunger Pairs Must Have High Hydraulic Density The Needle And Bushing Should Move Smoothly, Under Their Own Weight At An Angle Of 45C Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Electrode Brand Uoni – 13/55 Type E50a. Basic Coverage. High Impact Strength And Ductility Of The Seam. Direct Current Operation (Dc+). 5 Kg Per Package Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications, The Supplier Must Replace Them Within 15 Working Days. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. 334-1111005-20 Unit Complexity: Injection Pump Itself (8 Sections) All-Mode Speed Controller With Boost Corrector Fuel Lift Pump – 33.1106010 Pump Type – In-Line Multi-Plunger Plunger Diameter – 9Mm/10Mm Regulator Type – Mechanical, All-Mode With Anti-Smoke Corrector. Adjustment And Testing – The Pump Must Be Bench Tested And Adjusted By The Manufacturer. The Presence Of Seals On The Adjusting Screws Is Mandatory Complete Set - Supplied Assembled With Installed Injection Pump And Control Levers. All Inlet And Outlet Openings Must Be Closed With Protective Process Plugs. Material: Aluminum Alloy Body Without Cracks Or Pores. Plunger Chambers Must Have A High Density According To The Specifications. Documentation - The Mandatory Presence Of A Product Passport With An Individual Serial Number And A Mark From The Customer’S Representative Or Quality Control Department. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days., V-Belt, Article No. 7401307170 Types Sizes – 8.5X8-13.20 The Material Is A High-Quality Mixture For Resistance To Oils, Fuels And Temperature Changes From -50C To +100C Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Oil Pump With Gear (Assembled), Article No. 740.1011010-02 The Pump Is A Two-Section Gear Type. One Section (Pressure) Supplies Oil To The Main Line, The Second (Radiator) Supplies An Oil-Filled Radiator And A Centrifugal Filter. Pump Type - Gear, Two-Section The Productivity Of The Discharge Section Is Not Less Than 115 L/Min (At 2600 Rpm Of The Shaft) Radiator Section Capacity – At Least 45 L/Min Safety Valve Response Pressure – 0.85 -0.95 Mpa Drive Type – Gear Number Of Teeth Driven Gear – 30 Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. 273-1112010-20 The Nozzle Is Designed For Dosed Injection And Fine Atomization Of Fuel In The Combustion Chamber Of A Diesel Engine. Injection Start Pressure – 21.57-22.75 Mpa (220-232 Kgf/Cm2) Number Of Sawing Holes – 5 Holes Nozzle Diameter – 0.30 Mm Effective Flow Area – 0.220-0.240 Mm2 Spray Needle Stroke – 0.22-0.29 Mm Fastening Type: Bracket. Tightness - Complete Tightness Along The Locking Cone Of The Needle At The Joints At A Pressure Of 1-1.5 Mpa Below The Opening Pressure. Spray Quality - Precise, Intermittent Injection Material - The Body And Needle Of The Sprayer Must Be Made Of High-Alloy Heat-Resistant Steel With Appropriate Heat Treatment. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. St-142B-3708600 Ratchet Designed To Withstand Extreme Starting Loads. Number Of Gear Teeth – 10 Gear Module - 3.75 Mm Direction Of Rotation – Right Gear Diameter – 39.5-40 Mm Material – The Operating Gear Must Be Made Of Heat-Treated Alloy Steel. Tooth Hardness – 56-52 Hrc Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, A Set Of Copper Washers (At Least 100 Pieces In A Set), Material – Honey Grade M1 Or M1p With A Frequency Of At Least 99.9% Material Condition: Soft (Annealed) Honey Resistance - To Diesel Fuel, Motor Oil, Antifreeze And High Temperatures Up To +600C Quantity In Set 100Pcs Applicability: Fuel Equipment, Oil System, Cooling System And Pneumatic System 1)6.8Mm 2)10,12,14Mm 3)16.18Mm 4)20.22Mm Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Rear Light, Article No. Fp133 Multifunctional Rear Light Rated Voltage – 24W Lamp Type – A24,21,3 Case Material: Impact-Resistant Metal Or Reinforced Polymer With Protective Grille Glow Color - Red Blackout – The Design Must Provide The Ability To Install Standard Blackout Attachments Vibration And Impact Resistance The Flashlight Must Withstand Shock Loads Of Up To 10-15G (According To Gost For Military Equipment) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Article No. 740.1003010 The Head Is Supplied Fully Equipped With A Gas Distribution Mechanism And Is Ready For Installation. Complete Set - Body, Intake And Exhaust Valves, Springs, Crackers, Discs, Valve Seats. Housing Material: High-Strength Aluminum Alloy The Valves Are Heat-Resistant Steel, The Outlet Valve Has A Stellite Overlay. Tightness - Tested With Compressed Air (0.4 Mpa) Combustion Chamber Volume – 42.5-45.5 Comprehensiveness - The Presence Of Protective Plugs In The Inlet/Outlet Cooling Channels Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Tachometer, Article No. Tx171-3813010 The Device Is Designed For Continuous Measurement Of Engine Rotation Frequency And Display Of Engine Operating Time Rated Voltage – 24 V Upper Measurement Limit – 3000-4000 Rpm Graduation Value – 100 Rpm Signal Type – Pulse Vibration Resistance - The Device Must Maintain Accuracy Of Readings During Vibrations With A Frequency Of Up To 50 Hz And Acceleration Of Up To 50 M/S2 Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Oil Filter Filter Element Assembly, Article No. 740-1012040 Type Size – Height 200-205Mm Outer Diameter -100-103Mm Construction Type - Replaceable Paper Element With The Rest Of The Internal Frame And Metal Covers Filtration Material – Highly Porous Filter Paper With Final Impregnation Nominal Filtration Fineness 25-40 Μm Completeness: Each Element Must Be Supplied With A Set Of Sealing Gaskets (Body Rings And Small Ring) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Rotating Lamp (Large Single-Pin) Article No. A24-21-3 Rated Voltage – 24 V Rated Power – 21 W Luminous Flux – 440 Lm Base Type – Ba15s Flask Type – Ball (S25/P25) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Engine Repair Kit, Article No. 7403-1000002 Sealing Of Head Liners Only Fluorine Rubber Or Heat-Resistant Silicone Head Gaskets 8Pcs Reinforced Paronite With Metal Edging For All Functional Holes Gas Joint Rings 8Pcs Steel With Copper Plating/Coating Manifold Gaskets Made Of Steel-Asbestos Or Steel-Asbestos Sheet With Increased Fire Resistance The Pan Gasket Is Made From A Rubber-Cork Mixture Seals Front/Rear Silicone Or Fluorine Rubber With Dust-Proof Edge Contents Of A Complete Repair Kit 1) Cylinder Head Group: Head Gaskets, Covers, Gas Joint Rings, Valve Caps (16 Pcs) 2) Cpg Group: Sealing Rings Of Sleeves (24 Pieces - 3 Sleeves Each) 3) Timing Group: Gaskets For Front And Rear Block Covers. 4) Lubrication System - Thought Pump Filter Pan Gasket 5) Cooling System - Gaskets Of The Water Pump, Thermostats, Pipes 6) Fuel System - Copper Washers, Injectors And Injection Pump Gaskets 7) Turbocharging - Gaskets Of Turbochargers, Drain Pipes And Manifolds Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods., Article No. 5903-3408100 Seamless Steel Product With Anti-Corrosion Coating And Flared Ends For Union Nuts Or Fittings Working Pressure - Up To 10.0 Mpa Pressure – 25 Mpa Material – Steel 20 (Gost 8734-75) Coating - Galvanized Or Cadmium Plating Connection Type - Fitting, With A Conical Fit Or Through Copper Washers. Geometry – Strict Compliance With Bending Angles According To Drawing 5903-3408100 To Eliminate Tension During Installation. Protection During Transportation - The Ends Of The Tubes Must Be Closed With Plastic Plugs. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Front Lamp, Article No. Pf133 Rated Voltage -24 W Lamp Type – A24,21,3 Case Material: Impact-Resistant Metal Or Reinforced Polymer With Protective Grille Glow Color - Red Blackout – The Design Must Provide The Ability To Install Standard Blackout Attachments Vibration And Impact Resistance The Flashlight Must Withstand Shock Loads Of Up To 10-15G (According To Gost For Military Equipment) Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days. Refurbished And After Repair, Restoration Spare Parts Are Strictly Prohibited For Delivery. Reception Of Goods From Monday To Friday From 9.00 To 17.00. Lunch 13.00 To 15.00, Release Bearing With Clutch, Article No. 142.1601180 Clutch Release Clutch Assembled With Bearing. The Number Of The Bearing Itself Is 986714Ks17 (Angular Contact Ball, Closed) The Clutch Is Designed To Transmit Force From The Release Fork To The Release Levers Of The Clutch Basket Bearing Type – Thrust, Single Row, Closed Type. Lubricant - Embedded Inner Diameter – 70 Mm Outer Diameter (Bearing) – 105 Mm Width (Height Of The Coupling Assembly) – 65 -70 Mm A Design Feature Is The Presence Of A Grease Fitting (Grease Fitting) Or A Channel For A Lubrication Hose Coupling Material - Forged Steel Or High-Strength Cast Iron (Without Casting Cavities And Cracks In Contact With The Fork) Bearing Tightness - The Presence Of Reliable Steel Or Rubber-Metal Seals That Prevent The Leakage Of Lubricant When Heated And The Ingress Of Dust Inside. Analogue Is Not Allowed. Spare Parts Must Be New, Original - 1St Category In Original Packaging, Have A Quality Certificate From The Manufacturer With A 1-Year Warranty From The Date Of Installation, Stamped And Signed By Officials, Technical Specifications Must Comply With The Nomenclature Codes, The Nomenclature Number Must Be Engraved On The Spare Part, A Sticker Is Not Allowed On Spare Parts. If Necessary Or In Doubt About The Quality Of The Goods, The Customer Will Disassemble The Goods With The Supplier To Check Restoration And Authenticity. Spare Parts And Property Via Courier Are Not Accepted. Be Sure To Agree With The Customer When Purchasing And Delivering Goods. The Required Instructions Must Be Followed On Time. On The Invoice, Indicate The Contract Number And Date. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods. If The Product Does Not Meet The Technical Specifications Or The Refurbished Supplier Must Replace Them Within 15 Working Days.
|
