|
Forage Harvester - First-Rate Forage Harvester, Intended For The Harvesting And Processing Of Various Crops, With Tdp Tractor Drive, Required Rotation Of 540 Rpm And Power Between 55 And 90 Hp, Equipped With Box And Cardan Transmission System, Crown And Pinion With Shielded Box, Rotor Shaft Directly In The Transmission Box And Diameter Of 45 Mm Input Shaft, Including Hydraulic Control. The Equipment Must Have Four Internal Rollers, Without Being Driven By Chains, Two Collection Rollers, One Smooth Roller And One Movable Roller. The Rotor Must Be Adjustable, Containing 12 Knives In A C Profile, A Fixed Counter-Knife With Two Useful Lives, Two Cleaners Per Rotor And A Sharpening System With A Rectangular Stone. It Should Also Have A Removable Pro Grain Processor, Gears With Cutting Size Adjustment, Offering 24 Chopped Sizes, Ranging From 2 Mm To 36 Mm. The Unloading System Must Have Six Launchers, Foldable Outlet Spout, Cross Link Polyethylene Spout With Internal Protection, Spout Rotating Piston, Jet Breaker And Articulating Platform. The Machine Must Be Equipped With Support Foot, Rotor Drive Cardan And Rollers, Protective Fairing, Tool Box And Fully Comply With Current Safety Standards. The Estimated Production Should Be Up To 30 Tons Per Hour, With An Approximate Weight Of 615 Kg. The Equipment Prospectus, Operators Manual And Parts Catalog Must Accompany The Proposal. Agricultural, With Tractor Drive, Must Have Approximate Total Dimensions Of 5.10 M In Length, 2.35 M In Width And 2.60 M In Height, And Loading Box Dimensions Of 3.60 M In Length, 10 M In Width And 1.00 M In Height. The Load Capacity Must Be Up To 7,200 Kg (7 Tons), With A Minimum Trailer Weight Of 1,390 Kg And A Volumetric Capacity Of 7.5 M Without An Over Lid, Reaching Up To 9.0 M With The Use Of An Over Cover. The Cargo Box Must Be Made Of Reinforced Structural Steel With Ribs, Prepared To Receive A Lid, With Sides In Astm A36 Steel, Minimum Thickness Of 2.5 Mm, Containing Horizontal Reinforcement Folds With Angles Of 45 And 90, And A Floor In Astm A36 Steel, Minimum Thickness Of 3.0 Mm, Type Double Soul. The Chassis Must Be Reinforced, In A U Type Structure, With Astm A36 Steel Stringers, Minimum Thickness Of 6.35 Mm And Core With A Minimum Height Of 245 Mm. The Tilting System Must Be Driven By A Hydraulic Cylinder With At Least Three Stages, Activated By The Tractors Hydraulic Control, Containing A Safety Action Spout. The Rear Cover Must Be Made Of Astm A36 Steel, With A Minimum Thickness Of 3, With A Height Of 500 Mm Higher Than The Sides, With An Automatic Unlocking System And Lateral And Vertical Opening, While The Front Cover Must Be Made Of Astm A36 Steel, With A Minimum Thickness Of 2.65 Mm. It Must Have Columns/French Arm In Astm A36 Steel, With Rear Reinforcement That Does Not Require A Drawbar, In Addition To An Upper Reinforcement Tube In Accordance With Nbr 8261 Grade B, With Minimum Measurements Of 4.25 X 60 X 120 Mm. Internal And External Painting Must Be Made Of Anti-Corrosive Polyester Powder. The Wheelset Must Be Of The Tandem Type, With 16 Rims, Reinforced Six-Hole Hubs, Equipped With Four New Tires, Measuring 7.50 X 16, Minimum
|
