|
Supply And Installation Of Construction Plate With Galvanized Sheet Metal And Wooden Structure. Af_03/2022_Ps, Conventional Lease Of Work, Using Template Of Pointed Boards Every 2.00M - 2 Uses. Af_03/2024.*, Electricity Input, Overhead, Three-Phase, With Embedded Box, 25 Mm2 Cable And Din 50A Circuit Breaker (Concrete Post Not Included). Af_07/2020, Reinforced Concrete Post With Double Section T, Extension Of 8.00 M, Resistance Of 150 Dan, Type D, Laying Of Concrete Post With Nominal Length Of 9 M, Nominal Load Of 150 Dan, Concrete Base Embedment With 1 M Of Concrete And 0.5 M Of Soil (Not Included In Supply). Af_04/2025, Wooden Or Plywood Warehouse (3 Brita 0 E 1, Slump = 190 +/- 20 Mm, With Pumping (Pump Available), Without Launching (Nbr 8953), Resistance Class C30, Brita 0 E 1, Slump = 100 +/- 20 Mm, Cyclopean Concrete Fck = 15Mpa, 30% Hand Stone In Real Volume, Including Launch. Af_05/2021, Masonry For Sealing Solid Ceramic Blocks (5X10x20cm) Thick 20Cm, Laying Mortar Prepared In A Concrete Mixer, Insulated Shoe Frame, Baldrame Beam And Running Shoe Using 8Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Block Frame, Insulated Footing, Baldrame Beam And Running Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_01/2024, Baldrame Beam And Running Shoe Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Manufacture, Assembly And Disassembly Of Formwork For Rafters, Made Of Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, Fence Masonry Made Of Horizontally Drilled Ceramic Blocks Of 14X19x29 Cm (Thickness 14 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Girder Molded In Place In Concrete, Thickness Of *20* Cm. Af_03/2024, Girder Molded In Place In Concrete, Thickness Of *20* Cm. Af_03/2024, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Frame Of Pillar Or Beam Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly. Simple Ceiling Height, In Sawn Wood, 4 Uses. Af_09/2020., Unidirectional Precast Slab, Bi-Supported, For Floor, Ceramic Filling, Conventional Joist, Total Slab Height (Filling+Cover) = (8+5). (Adapted From Sinapi - 101963), Concreting Beams And Slabs, Fck=30 Mpa, For Precast Slabs Using A Pump - Laying, Thickening And Finishing. (Adapted From Sinapi - 103674), 4 Uses. Af_09/2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-60 5 Steel, Plating Applied To Masonry (Without The Presence Of Gaps) And Concrete Facade Structures, Using A Trowel. Mortar Mix 1:3 Prepared In A 400L Concrete Mixer. Af_10/2022, Plaster Or Single Putty
|
