|
Day To Day Maintenance Incl Certain Other Misc Works At Md, Otm, Mes Area At West Side Of Lehal Marg Under Ge(S) Binnaguri As Per Tender Docus- 1 Hacking out of old broken glass any thickness size quality or description from metal (Aluminium/steel) frame including punching or drilling out old glazing pins complete all as specified 2 S&F 4mm thick sheet glass, ordinary quality and glazing with and including aluminium beading in square exc 0.5 sqm in each pane as per existing required at site for completion of work complete all as specified 3 S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including steel pin. 4 S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane including steel pin. 5 Taking down steel wire mesh door shutter area exc 1 Sqm but n.exc 2 Sqm each and refixing in the same opening after repairing, resucring, easing, adjusting by cutting / welding of hinges (03 hinges in each shutter) to suit the raising of floors etc, including replacement of wornout wire mesh, handle, tower bolt, sliding bolt, guard bars, rat tail spring etc as per existing at site complete all as specified 6 Taking down steel wire mesh shutters of any description area exc 1 Sqm and n. exc 2 Sqm each and removal from site complete all as specified 7 M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified Note: (i) Steel wire mesh door shutters prepared strictly as per existing at site including complete accessories like handle, tower bolt, sliding bolt, hinges, rate tail spring etc. Nothing extra shall be admissible on this account.(ii) Wire cloth shall be measured and paid separately under respective item as supply only. 8 Supply only galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed to steel door shutter as per existing complete all as specified 9 M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified 10 Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified 11 M&L for providing machine cut polished Kota stone slab 18-20mm thick over and including 15mm thick cement screed bed in CM (1:6) and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified 12 All as per item No 11 but in narrow width of vertical surfaces like riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering/backing coat in cement mortar (1:3). 13 M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thickrendering/ backing coat in (1:4) including rounding the exposed surfaces of granite complete all as specified 14 All as per item No 13 here in before but as in skirting (12 to 15 mm thick) but on 10 mm thick rendering/ backing coat in CM (1:3) complete all as specified 15 Providing holes to cooking platform of 25 mm dia size for inserting cooking gas pipe in suitable place complete all as specified 16 Demolition of brick work or stone/boulder masonry/ precast concrete block built in cement mortar including all quoins, arches, pillars etc complete all as specified 17 M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified 18 M&L for brickwork with flyash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified 19 M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work mixed with water proofing compound @ 200 ml per beg of cement or as per manufacturer"s instructions finishing the surface fair and even without using extra cement complete all as specified Note: Water proofing compound shall be measured and paid separately under relevant item of schedule "A". 20 Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified . 21 M&L for 15mm thick rendering in cement mortar 1:6 on fair face/other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified 22 Demolition of cement concrete (Unreinforced) Concrete of any description and in any position not otherwise specifically provided complete all as specified 23 M&L for Plain Cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone agg)in foundations, filling and mass concrete complete all as specified 24 M&L for providing plain cement concrete (1:3:6) type C-1, (using 20 mm graded crushed stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating including necessary form work as required complete all as specified 25 M&L for hard core of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified 26 M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surface even & fair without using extra cement including filling the joints with bitumen & sand in 2:1 proportion etc complete all as specified 27 M&Lfor 75 mm thickcement concrete 1:3:6type C-2 (using 40 mm graded crushed stone aggregate) as in path /steps/ sub base laid with and incl use and waste of form workand finishing the surface even and rough to receivethe topping layer ortiling complete all as specified. 28 M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone agg) 25 mm thick (average) stone aggregate as in roof padding, levelling course including cleaning of existing surface complete all as specified 29 M&L for joint freenon-skid ceramic tiles any selectedcolour (600x600x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified 30 All as item No 29 here-in before but on vertical surfaces fixed over and including 10mm thick rendering/ backing coat in CM (1:4) complete.(Size =600x100mm) 31 M&L for preparation of newly plastered or unplastered wall surfaces and applying two coats of Exterior acrylic emulsion paint of standard quality and make, over a coat of white primer complete all as specified 32 M&L for preparation of the surface and applying 1.00mm thick (average thickness) wall care putty on wall complete all as specified. 33 M&L for two coats of acrylic distemper over a coat of primer on new wall surface including preparation of the surface all asspecified. 34 Dismantling wrought iron or mild steel work of any description not otherwise provided for grills, rails etc and removal from site. 35 M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters;verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified 36 M&L for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe - 410 (Gde E-250) complete all as specified 37 S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 16 to 20 mm 38 S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm & n exc 10cm long dia of shank 16 to 20 mm 39 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified 40 S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with self tapping screw complete all as specified 41 Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified 42 S&F aluminium anodised snap grid false ceiling to support the boards / tiles with aluminium Tee section 35 mm x 25 mm x 1.40 mm cross Tee 23.50 mm x 23.50 mm x 1.40 mm and aluminium angle 25 mm x 25 mm x 1.40 mm as on edge / sides including hanging proper hanging arrangement with 4 mm dia anodized galvanised iron wire and adjuster complete all as specified 43 S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified 44 Taking down chowkats or frames area exc 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutter from the frames) and removal from site including cutting holes for taking out hold fast or dismantling brick work/ stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without extra cost to the Govt) complete all as specified. 45 Taking down chowkats or frames area n.exc 1.5 Sqm each with shutters (without taking off shutter from the frames) and removal from site including cutting holes for taking out hold fast or dismantling brick work/ stone work (holes cut and any other damage to jambs walls for taking out hold fast shall be finished identical to existing finish without extra cost to the Govt) complete all as specified. 46 Taking down shutters of any description area exc 1 Sqm and n. exc 2 Sqm each and removal from site complete all as specified 47 S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm 48 S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm 49 Resecuring or easing & adjusting without taking down shutters of any description area exc 1 Sqm and n. exc 2 Sqm each complete all as specified 50 Taking down shutters of any description and refixing in the same opening after resecuring or easing & adjusting area exc 1 Sqm and n. exc 2 Sqm each complete all as specified 51 S&F 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated with second class hard wood rail and styles, complete all as specified 52 M&L for 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified 53 S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified 54 S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/ frame to match complete all as specified 55 M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified 56 S&F 150 mm size aluminium handles cast type anodised complete all specified 57 S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all specified 58 S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all specified 59 S&F 140mm (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 60 S&F 300mm size, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete 61 S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified 62 S&F in repairs 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified 63 S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified 64 S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading, screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified 65 M&L for fabrication and fixing of anodised powder coated aluminium door shutter fixed with rubber gasket, stopper, cleats, handles etc complete for aluminium frame of size 101.6 mm x 44.45 mm x2 mm and section of bottom and top rail of section 114 mm x 44.45 mm x 2mm and lock rail shutter frame of 83 mm x 44.45 x 2 mm with and including panels of 5.5 mm thick plain/ frosted float glass, and with anodised aluminium snap beading of size 18.20 mm x 16.66 mm scred for fixing fully including all necessaryfittings and EPDM rubber packing each shutter shall be provided with two decorative type aluminium disc handle of 150 mm dia per shutter, 1 No heavy duty 200 mm long aluminium tower bolt per shutter and 3 Nos 125 mm long stainless steel butt hinges per shutter including taking down old one complete all as specified 66 Taking down aluminium door/ window shutters any size and refixing in the same opening after repair/replacement of defective accessories/any part like handle, hinges, tower bolt, beading, rubber packing, lock, any aluminium shutter part, screws, door stopper, glass etc. upto the complete all as specifiedNotes:(i) Glass shall be measured and paid separately under relevant item as supply only.(ii) The quoted rates shall be inclusive cost of handle, hinges, tower bolt, beading, rubber packing, lock, any aluminium shutter part, screws, door stopper and nothing extra shall be admissible on this account. 67 Supply only 5.5 mm thicksheet glass, ordinary quality in square exceeding 0.5 Sqm in each pane, complete all as specified 68 S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified 69 S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified 70 S&F factory made solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified. 71 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement & fixing in the frame at site as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified. 72 S&F 75mm size stainless steel butt hinges with mild steel hinge pin complete all specified 73 S&F 100 mm size aluminium handles cast type anodised complete all specified 74 S&F aluminium anodised barrel tower bolt of extruded section 100 mm long complete all specified 75 S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified 76 M&L for Plain Cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone agg)in foundations, filling and mass concrete complete all as specified 77 M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication) 78 Demolition of Reinforced cement concrete of roofs, floors (other than ground floors), beams, staircase, landings, chajjas, facia and similar suspended work complete all as specified 79 M&L forreinforced cement concrete (nominal mix) type A1 1:1.5:3(using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified.Note: Reinforcement and formwork shall be measured and paid for separately. 80 M&L forreinforced cement concrete (nominal mix) type A1 1:1.5:3(using 20mm graded crushed stone aggregate) as in chajjas etc complete all as specified.Note: Reinforcement and formwork shall be measured and paid for separately. 81 M&L forreinforced cement concrete (nominal mix) type A1 1:1.5:3(using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified.Note: Reinforcement and formwork shall be measured and paid for separately. 82 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified 83 Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surfaces of concrete complete all as specified 84 Use and waste of formwork to Formwork to chullah hoods, chajjas, troughs and similar items including edges, etc. for flat rough finished surfaces of concrete complete all as specified 85 Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide for rough finished surfaces of concrete complete all as specified 86 S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe290,Gde-E-165 complete all as specified 87 M&L for TMT bar 10 mm dia and over cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified 88 M&L for TMT bar 5 mm dia and over, cut to length, bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in binders, stirrups etc complete all as specified 89 M&L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing and conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified . 90 Taking down cement plaster on wall & ceiling of any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified 91 M&L for 5mm thick rendering in CM 1:3 on ceiling surfaces finishing the surfaces even and smooth without using extra cement complete all as specified 92 M&L for applyingthree coat of white washing including preparation of new or previously untreated ceiling surfaces. 93 M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over applying necessary layer of putty where ever required for filling of holes and depressions complete all as specified 94 Material & labour forpreparing old surfacesof wall and applying one coat of oil bound distemper over applying necessary layer of putty where ever required for filling of holes and depressions complete all as specified 95 M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying two coats of exterior acrylic emulsion paint all as per manufacturer"s specification and as specified. 96 M&L for preparation of old wall surfaces any type by wire brushing, brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, making good minor surface imperfections such as holes, dents cracks etc in cement mortar 1:3 and applying one coat of exterior acrylic emulsion paint all as per manufacturer"s specification and as specified. 97 M&L for applying onecoat of cement base paint of standard quality and make including preparation of new /old wall surfaces complete all as specified 98 Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified 99 M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cementto match with shade of tile in floors laid over and including 15mm thick screed bed in CM (1:6) complete all as specified 100 M&L for glazed ceramic coloured tiles (450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match with shade of tile fixed over and including 10mm thick rendering/ backing in CM(1:4) complete all as specified 101 M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including 15mm thick screed bed in CM(1:6) complete all as specified 102 All as per item No 101.00 but as in skirting fixed over and including 10mm thick rendering/ backing in CM(1:4) complete all as specified 103 Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified 104 Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified 105 S&F 15mm bore steel water tubes, "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) complete all as specified Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. 106 S&F 20mm bore steel water tubes, "medium grade" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc (concealed or on surface) complete all as specified Note:- The quoted rates shall be inclusive cost of cutting chases in walls, etc. and their making good. 107 S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. 108 S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. 109 S&F 110mm bore PVC (SWR) bends any radius complete all as specified. 110 S&F 75mm bore PVC (SWR) bends any radius complete all as specified. 111 S&F in repairs 75mm bore PVC (SWR) floor/ nahani/ multi floor trap with CP grating any type including jointing with solvent cement complete all as specified. 112 S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with polythene foam insulation as intermediate layer and closed top) double layer ISI marked (IS: 12701 : 1996), hoisted and fixed in position all as specified in SSR Part I including inlet, outlet and over flow connections etc including dismantling existing tank complete as specified 113 S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete as specified 114 S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified 115 S&F in repair 15mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified 116 S& in repair vitreous China Urinal, Half stall type, white (including flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified 117 S&F in repair urinal spreader of CP brass for fixing with 15 mm dia pipe complete all as specified 118 S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including PVC seat cover of same make complete all as specified 119 S&F in repair vitreous China one piece EWC white including duroplast soft close seat cover complete all as specified Make: Cera Cat No. A1014110 & 11 or technocommerically equivalent make/model in Jaquar/ Plumber/ Nycer as approved by GE. 120 S&F in repairWater Closet (squatt pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (including flush pipe) including PVC "P" or "S" trap and connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified 121 S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour including PVC connection, PVC flush pipe of required length complete all as specified 122 S&F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified 123 S&F in repairs Bib taps fancy type, brass chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified . 124 S&F in repairs Health faucet brass chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and CP wall hook including making connections and fixed in position complete all as specified 125 S&F in repair 15 mm bore fancy type bib taps long body (two in one) brass material, 15 mm bore single handle and wall flange with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified Make:- CERA Cat part No. F-1015163 or of Techno commercially equivalent model in other approved make. 126 S&F in repair brass chromium plated shower rose 125 mm size with shower arm 150 mm long with swivel joints for fixing with 15 mm bore GI pipe complete all as specified 127 S&F in repair 15 mm bore angle/ stop cock CP brass with flange complete all as specified 128 S&F in repairs stop valves fancy type, brass chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified 129 S&F in repairs bevelled edge mirror of size 600 x 450 mm, mounted on 6 mm thick AC plain building board or PVC board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete all as specified 130 S&F in repair stainless steel curtain rod of 25 mm dia and thickness not less than 0.75 mm fixed with curtain rod holder and finials etc. complete all as specified 131 S&F in repairs wash hand basin vitreous China, white, flat back (550x400mm) including cutting for and pinning ends of brackets and waste coupling of Bass CPfor basin etc with long screwed shanks and fly nuts, full threaded flange embedded in white cement incl PVC waste pipe required length complete all as specified 132 S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified 133 S&F in repair fancy type swan neck pillar taps, brass with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified 134 S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore and fixed complete all as specified 135 Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified 136 M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for applying roof treatment work finished even and smooth without using extra cement complete all as specified Note: Water proofing compound shall be measured and paid separately under relevant item of schedule "A". 137 Material and labour for water proofing treatment with following application over roofs surface complete all as specified: -(i) Applying bituminous primer at the rate of 0.4 Litres/Sqm on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated.(ii) Applying one coat of blown type bitumen of grade 85/25 as binding material at the rate of 1.2 Kg/Sqm.(iii) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, black finish reinforced with non woven polyester matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instruction including preparation of surface.(iv) Top of membrane shall be provide with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.Note :- (a) The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009).(b) After completion of roof treatment work ponding test for 48 hrs shall be carried out by the contractor and cost for the same shall be. 138 M&L for coated pre-polished coloured chequered cement concrete tiles made with grey cement and pigments of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over in pavement / footpath / floors over incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified
|
