|
Heavy Agricultural Furrower - With Reinforced Tubular Structure Chassis, Attachable To The Tractor Using A Triple Hitch System (3 Points), Intended For Opening Furrows For Planting And Deep Fertilization. Minimum Required Specifications: Chassis: Reinforced Tubular Structure In High Strength Carbon Steel; 930 Mm;Free Height: Minimum 710 Mm;Total Height: Minimum 1,415 Mm;Stem Type: Reinforced, Single, With Tempered Steel Tip/Subsoiler, Removable And Replaceable;Working Depth: Minimum 30 Cm, With Adjustment;Limiting Wheel: Adjustable, For Control Depth; Coupling: Category Ii 3-Point Hitch; Recommended Power Range: For Tractors From 55 To 90 Hp; 01 Mobile) Adjustable Rotor With 12 Knives In C Profile, Removable Grain Processor, 06 Launchers, Articulating Platform, Gears With Cutting Size Adjustment, Rotor And Roller Drive Cardan, Manual Jet Breaker Control Lever (Semi-Hydraulic Version), Transmission By Box And Cardan, Hydraulic Spout Or Full Hydraulic Control (Bica E Quebra Jato)., Metallic Hydraulic Tipper Agricultural Trailer 5 Tons Agricultural Trailer With Metallic Body, New; Double Wheel On One Axle. Load Capacity: Minimum 5 Tons; Rims And Tires: New 10-Ply Tires, Minimum Rim 16; Tipper Type: Hydraulic Wooden; Wheel Hubs: Bearing; Fixing System: Unclipable Hitch; Traction:Towed; Dimensions: Body (2.90 M X 1.70 M X 0.85M); Weight: Minimum 600K, Metallic Truck, Tipper, New. Rear Lid With Automatic Opening And Sides With Manual Opening, Load Capacity: 07 Tons; With Rims And Tires, 2-Axle Hydraulic Tipping. - Minimum Load Capacity 7,000 Kilos; - Minimum Volumetric Capacity Of 7.5 M³ Without Over Lid, Equipment With Box In Reinforced Structural Steel, With Ribs; Internal And External In Polyester Powder;- Box Prepared To Receive The Over Lid, In Which Case It Can Reach A Minimum Volume Of 9.0 M³;- Sides Of The Box Formed In Astm A36 Steel With A Thickness Of 2.65 Mm, Stiffened With Two Horizontal Folds With A Minimum Angle Of 45° And 90°;- Front Cover In Astm Steel A36, Minimum Thickness Of 2.65Mm;- Rear Cover In A36 Steel With A Minimum Thickness Of 3.00Mm, With A Minimum Height 500Mm Greater Than The Sides, With Vertical And Lateral Opening;- Double Core Floor In Astm A36 Steel, Minimum Thickness 3.00Mm;- Top Tube Of Reinforcement Nbr 8261 Grade B, 4.25 Note:- The Rear Column Must Be Reinforced In Such A Way, So That It Is Not Necessary To Use A Drawbar When It Is Side Opening;- Chassis Stringers In A36 Steel, Minimum Thickness Of 6.35Mm, Minimum Core Height Of 245Mm;- Adjustable And Movable Support Foot;- Simple Oscillating And Movable Hitch;- Front Ladder;- Equipment With Technical Safety Report, According To Anr-12;, Silage/Forage Chopping Machine Tdp System Coupled Three Points Of The Tr
|
