|
A105.5714.3 Reinforcement Is A Single -Mode Reinforcement For A Drain Toilet Tank With A Lower Waterplace And A Hole In The Tank Cover 38-44 Mm, A Round Chrome Drain Button, Connection: Plastic Fitting G1/2 Hp. The Set A 105.57.14.3 Is Designed To Fill The Flush Tank With Water And Supply It To The Washing Into The Toilet. A Large Number Of Adjustments Allows You To Use This Reinforcement For Most Tanks Of Domestic Toilet Manufacturers. The Reinforcement Consists Of Bulk And Drain Mechanisms. The Bulk Mechanism Is Suitable For Ceramic Drain Tanks With Lower Water Eyed. The Lower Water Connection Provides A Low Noise Level When Filling The Tank. The Annexing Fitting With An External G1/2 -Length 45 Mm Length Is Made Of Shock -Resistant Plastic For The Reliable Attachment Of The Mechanism And Ensure The Tightness Of The Connection. In The Bulk Mechanism, A Grilled Grilled Filter Is Installed To Protect Against Pollution. The Mechanism Provides For The Possibility Of Adjusting The Water Level In The Tank, In Which The Inlet Valve Is Closed. The Mechanism Has A Low Sensitivity To Pressure Drops In The Water Supply Network. The Recommended Working Pressure Lies In The Range From 0.05 To 1.0 Mpa. The Time Of Filling The Tank In A Volume Of 6 Liters Is Not About 2.5 Minutes. In The Drain Mechanism, A Single Washing Mode Is Implemented: When You Press The Drain Button, Draining The Entire Working Volume Of Water. The Reinforcement Provides For The Adjustment Of The Height Of The Installation: The Height Of The Tank On Which This Product Can Be Installed Lies In The Range From 285 To 419 Mm. The Drain Button Can Shift Relative To The Longitudinal Axis To Compensate For The Error Of The Form Of Ceramics. The Drain Mechanism Provides For Draining-Overflowing With Height Adjustment, Providing Emergency Flow Of Water Through The Toilet Into The Sewer, When, For Any Reason, The Shut-Off Valve Does Not Close And The Water Continues To Enter The Tank., Toilet Seat The Material Is Polypropylene Height, Cm 5 Length, Cm 42 Width, Cm 36, Mixer Mininarian Z13-Sop1-A045 The Main One Appointment For The Washbasin Type Of Mixer Single -Rod (Joystick) Pour Form Arched Turning The Depth Of The Jet 150 Mm Characteristics Drill Valve Ceramic Installation Type Of Installation Table (Horizontal) Mounting Holes 1 Pc Diameter Of The Holes For Installation 35 Mm Water Supply Hoses General Corps Material Silumin Coverage Chromium Stainless Steel (Matte) Bronze, 1. The Ball Of The Burn Vn 1/2 Butterfly -Ball Crane Is A Locking Device In Which The Mobile Part Of The Shutter Is The Shape Of The Rotation (Ball) Body With A Hole For Passing The Flow, For The Overlap Of Which Rotates Around Its Axis. The Ball Crane Is Simple In The Design, Easily Selected, Compact, Reliable In Work. The Most Adapted To Kazakhstani Operating Conditions. The Entire Locking Pipeline Reinforcement Of The Uno Brand Has An Increased Margin Of Strength Due To The Fact That It Is Made Of High -Strength Nickelled Brass (Brand Cw617n) By Hot Stamping. Full -Pass Balls Of Uno Have Increased Resource Reliability, Resistance To Corrosion And Tightness Temperature Interval From -30 ° C To + 140 ° C Regulatory Pressure From Pn40 To Pn 16 The Diameter Range From 1/2 To 1 1/4 On The Ball Valves Of The Uno Brand, A Trauma -Safety Handle With A Heat -Insulating Coating Of Pvc Is Installed, And A Self -Ending Nut And Fastening The Stainless Steel Handle Excludes The Possibility Of Spontaneous Surrounding. The Maintainability Of The Uno Ball Valves Is Ensured By The Use Of A Replaced Oil Seal With A Clamping Nut. The Special Design Of The Support Nodes Of The Saddle Seals Increases The Crane Resource And Ensures Its Light Opening. The Threaded Connection Of Half -Corps Is Recorded By Anaerobic Glue - Sealant., Water Eyeliner 50Cm 1/2G/W - Rubber Material; Rubber; Pvc Shell; Stainless Steel Type Of Connection Of The Sub -Wreck/Nut; Haye-Fitting Hut Length (Mm) 500 Mm Diameter Of The Thread At The Input1/2 The Diameter Of The Thread At The Output1/2 The Equipment Is Flexible Water Liner; Hose For Supplying Water To The Toilet; Hindering For A Crane; Hoses Under The Sink, Toilet Compact Standard Standard - • • Dimensions (Cm) 34.8X61.2X75.5 • Type Of Plumbing Product Toilet • Material Of The Toilet Porcelain • Water Drain Mode One Button • The Method Of Installation Of Floor, The Cuff For The Toilet Corrugated Kredined K828 - Corrugation Performs The Function Of The Fan Pipe And Is Designed To Connect The Toilet With The Sewer Pipe. The Main Advantage Is That They Are Easily Mounted And There Is No Need To Measure The Angle And Distance In Advance (As In The Case Of Fan Pipes). The Access To The Sewer In The Form Of An Adapter For Connecting To A Plastic Sewage System With A Diameter Of 110 Mm. K828 -A Flexible Outlet For The Toilet, Access To A Sewer 110Mm Is 225-520 Mm, For Cast Iron/Plastic Pipes., Venik Yellow Household Venik Sorgho - Made Of High -Grade Sorghus, An Annual Plant Of The Cereal Family. A Sorghum Broom Is Intended For Household Needs. For Industrial Purposes, It Is Used As A Tool For Cleaning Premises And Surrounding Territories. At Home, It Is Used To Sweep Floors. Material - Sorghum, Glue For Tiles - Type Of Work For Internal Work, For External Work Purpose For Ceramic Tiles Layer Thickness 3-7 Mm The Mixture Consumption Is 5-8 Kg Per 1 M² With A Layer Thickness Of 3-5 Mm Adhesion Strength 0.6 Mpa Features Are Moisture Resistant Weight 25.0 Kg Additionally Glue For Keram, Basket For Papers 10L O Type Of Garbage Bucket - Ordinary (Without Cover) O Form - Round O Volume - 10 L O Material - Metal O Color - Black O Diameter - 24 Mm O Height - 26 Mm O Type Of Basket - Universal O The Type Of Basket - Open (Without Cover) O Removable Cover - No O The Presence Of The Pedal - No O Installation Type - Floor O Surface - Matte O Garbage Basket (Mesh Urn) - Metal, Mesh. O Intended For Offices. Convenient For Assembling Fine Debris, Paper. You Can Put On A Garbage Bag On Top. Mesh, Black. Volume: 10 Liters Size: The Diameter Of The Top Is 23.5 Cm, Height 26 Cm, The Diameter Of The Bottom Is 17.5 Cm. Garbage Hole: At The Top Material: Metal, Description A Scoop With A Floor Brush Is Used For Cleaning In The Room. Type Of Means Brush+Scoop The Height Of The Pile 110 Mm The Stiffness Of The Pile Soft Scope Airport, Hospitals, Clinics, Railway Station, Bus Station, Hotel, Office The Length Of The Knuckle Of The Mop 1060 Mm The Width Of The Working Part 260 Mm The Processed Surface Floors/Any Surfaces, Boar Toilet With A Stand • Type Of Brush - Floor • Material - Plastic • Total Height - 37.5 Cm • Material - Plastic • Color - White
|
