Tenders Are Invited For Injection Mold Delivery in Czech Republic

Work Detail

The Subject Of The Project Is The Supply Of A Combined Injection Mold. It Will Be A New 4-Foster Combined Injection Molding Mold For The Production Of Sewer Fittings-Polypropylene Knees (Pp-H), According To Čsn En 1852-1+A1, Issued In May 2023, With A System Of Hot Inlet To Achieve Accurate Pressing, Optimal Production Cycle And Minimization. Required Parameters - Technical Specifications Of Delivery: • 1 Or 2 Or 3 Product Types Will Be Injected On The Form In One Cycle. • A Total Of 5 Types Of Products Will Be Combined On This Form. • Products Are Sewer Knees From Pp-H, According To The Above Standard In The Following Dimensions: Dn 110-15 °, Dn 110-30 °, Dn 110-45 °, Dn 110-67.5 °, Dn 110-87.5 ° • Number Of Free End Inserts: 15 ° 2X, 30 ° 2X, 45 ° 4X, 67.5 ° 2X, 87, 5 ° 2X • Possible Combinations Of Inserts: 45 ° -45 ° -45 ° -45 ° Or 45 ° -15 ° -15 ° -45 ° Or 45 ° -30 ° -30 ° -45 ° Or 45 ° -15 ° -30 ° -45 °, Or 87.5 ° -45 ° -45 ° -87.5 ° Or 87.5 ° -15 ° -15 ° -87.5 ° Or 87.5 ° -30 ° -30 ° -87.5 ° 87.5 ° -15 ° -30 ° -87.5 ° Or 67.5 ° -45 ° -45 ° -67.5 ° Or 67.5 ° -15 ° -15 ° -67.5 ° Or 67.5 ° -30 ° -30 ° -67.5 ° Or 67.5 ° -15 ° -30 ° -67.5 °. • The Injection Mold Will Be Made Of High-Quality Steel, Which Is Used Standardly For The Production Of Injection Molds For Plastic Polypropylene Plastic Products (Pp-H). • Guaranteed Turnover (Life) Forms Min. 2,000,000 Cycles. • Weight Up To 3200 Kg. • Injection Channels Will Consist Of 4 Independently Regulated Hot Upgrades. • Possibility To Replace The Shape From The Dividing Plane. • Cooling Will Be Provided By Cooling Channels In Solid And Movable Parts Of The Mold And Then All Shape Cores, Both The Throat And The Free Ends Of The Products. For All Exchanging Parts Of The Mold, The Connection And Tightness Of The Cooling Channels Will Ensure Via Rubber O Rings. • Departure And Arrival Of The Cores To The Initial (Closed) And End (Open Positions) Will Be Provided On The Injection Mold Using The Guide Pins. • The Maximum Possible Dimensions Of The Injection Mold Will Be Detached. • The Contractor Also Draws Up The Drawing Documentation Of The Products: Sewer Knees Dn 110-15 °, Dn 110-30 °, Dn 110-45 °, Dn 110-67.5 °, Dn 110-87.5 °, Which He / She Approves From The Client. • Based On The Approved Drawing Documentation Of The Products, The Contractor Shall Draw Up A Drawing Documentation Of The Injection Mold, Which Will Be Handed Over To The Client After The Work.

Contact Information