Motor -Powered Diesel -Powered Motor Gradient Tractor, Turbocharged Cylinders, Minimum Power Of 140Hp (Case 845B Or Similar), Compacting Roller Rental, With The Following Minimum Features: Water Tank Approximately 100 To 200 Liters, Warning Light, Sprinkling Timer, Vibration Cutting, Front And Rear Wide - Width Approximately Weight From The Module From 800 To 900 Kg- Theoretical Capacity To Climb Ramps 50%- Centrifugal Compaction Force 17Kn- 8, 8 To 9, 5 Kg/Cm- Rear Static Load With 2800 Rpm- Fuel Tank Capacity 23 Liters Hydraulic System- Variable Axial Pump, 2 Motors With Constant Flow Rate, Steering Pump Constant Flow, Hydrostatic Service Brake On The Front And Reverse Lever, Emergency Brakes And Multidiscus Parking In Cylinder Traction Engines. Similar., Long-Type Hydraulic Excavator Rental, Chap. 0, 52 M3, Excavation Range 15 Meters (R220lc) Or Similar., Mini Hydraulic Locking Late, 27/33 Hp Power, 3 /3, 4 Ton, (Yanmar Vio30) Or Similar. Supplementary Cabin For 4 Passengers, 6 Cylinders, 256 Horsepower. - Thermal Silo: Hot Or Cold Asphalt Mass Capacity Of At Least 7, 5 M³ With At Least 800 Liters Diesel Heating Through Electronic Control. - Emulsion Reservoir: Isothermal Tank With A Minimum Capacity Of 200 Liters. Air And Diesel Reservoir: Bipartar Tank With A Minimum Capacity Of 140 Liters. Water Reservoir: Made Of Carbon Steel With A Minimum Capacity Of 100 Liters For The Cooling Of The Cutter. Residue Box: Front With A Minimum Capacity Of 1,300 Liters Or 1, 30 M³. -Scougist: With 6 M Double Hose. For Air Painting And Air Cleansing And Adjustable Registration And Nozzle. Carrier Treadmill: Material Displacement Treadmill Inside The 460 Mm Width. And Driven By Chains For Discharge Of Hot Or Cold Asphalt Mass Through Hydraulic Retractable Spout With A Minimum Width Of 455 Mm. -Prisadora: Asphalt At Least 400 Mm Wide, Integrated With The Equipment Called Hydraulic Motorcycle With Height Adjustment And Transverse Displacement Of Up To 2,450 Mm, With Independent Wheel Drive -Driven Traction To Move The Equipment During The Operation Of The Cutter, With Side Platform To Transport A Vibratory Plate. -Tey Control: Platform For The Operator With Mechanical Locomotion And Panel For Control Of The Hydraulic Commands Of The Treadmill, Milling, Tunnel Break, Upper Comports With Drive Through Two Variable Flow Pumps Linked To Chassis, Thermometer And Signaling. Truck Equipped With Polyguindaste, 4X2 Stone Truck, Diesel Engine, With Payload Capacity Of At Least 7, 6 Tons, 12/14 Ton Pbt. (Mb Atego 1719) Or Similar, In Addition To All Compulsory Accessories Required By Denatran.
|