|
Tender For Providing Renovation And Various Infrastructure Development At Zpps Katewadi Tal Baramati Dist Pune- 1 ITEM NO. : 1 Dismantling brick masonry in Mud and stacking the materials as directed with all leads lifts etc.complete.....(INo46-08 , PgNo 296) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 2 ITEM NO. : 2 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.....(INo46-19 , PgNo 297) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () 3 ITEM NO. : 3 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.....(INo46-15 , PgNo 296) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 4 ITEM NO. : 4 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.....(INo38-26 , PgNo 235) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 5 ITEM NO. : 5 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Mean....(INo21-06 , PgNo 153) ( STATE DSR ) Item Spec: (Bd.A.2 Page No. 259) & () 6 ITEM NO. : 6 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.....(INo28-01, PgNo 199) ( STATE DSR ) Item Spec: (Bd.H.1 Page No. 329) & (RA NO. : 8) 7 ITEM NO. : 7 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. Total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Complete. (weight of profile 4.52 kg/sqm)....(INo38-34 , PgNo 236) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 8 ITEM NO. : 8 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.....(INo27-01, PgNo 197) ( STATE DSR ) Item Spec: (Bd.G. 1 Page No. 313) & (RA NO. : 9) 9 ITEM NO. : 9 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete.....(INo21-37, PgNo 157) ( STATE DSR ) Item Spec: (Bd.A.11 Page No. 263) & (RA NO. : 10) 10 ITEM NO. : 10 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.....(INo21-38, PgNo 157) ( STATE DSR ) Item Spec: (Bd.A. 12 Page No. 264) & (RA NO. : 11) 11 ITEM NO. : 11 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed )....(INo24-01 NS, PgNo 175) ( STATE DSR ) Item Spec: (Bd. E. 1 Page No. 287) & (RA NO. : 4) 12 ITEM NO. : 12 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-11 NS, PgNo 178) ( STATE DSR ) Item Spec: (Bd.F.3 Page No. 298 and B.7, Page No.38) & (RA NO. : 20) 13 ITEM NO. : 13 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-31 NS, PgNo 179) ( STATE DSR ) Item Spec: (Bd.F.5 Page No. 300 and B.7, Page.No. 38) & (RA NO. : 21) 14 ITEM NO. : 14 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-50 NS, PgNo 181) ( STATE DSR ) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38) & (RA NO. : 16) 15 ITEM NO. : 15 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed )....(INo25-70 NS, PgNo 182) ( STATE DSR ) Item Spec: (Bd.F.8 Page No. 302 and B.7, Page No.38) & (RA NO. : 22) 16 ITEM NO. : 16 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed )....(INo26-17 NS, PgNo 185) ( STATE DSR ) Item Spec: (Bd.F.11 Page No. 304 and B.7, Page No. 38) & (RA NO. : 23) 17 ITEM NO. : 17 Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumenetc. complete.....(INo33-30 , PgNo 216) ( STATE DSR ) Item Spec: (As directed by Engineer in charge) & () 18 ITEM NO. : 18 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.....(INo26-33, PgNo 188) ( STATE DSR ) Item Spec: (Bd.F.17, Page No. 306) & (RA NO. : 18) 19 ITEM NO. : 19 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil paintingofapproved quality and shade etc. complete.....(INo23-02, PgNo 173) ( STATE DSR ) Item Spec: (Bd.C.3 Page No. 275) & (RA NO. : 24) 20 ITEM NO. : 20 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) ( STATE DSR ) Item Spec: (Bd.G.5 Page No. 315) & (RA NO. : 1) 21 ITEM NO. : 21 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.....(INo27-06, PgNo 197) ( STATE DSR ) Item Spec: (Bd.G.7 Page No. 316) & (RA NO. : 25) 22 ITEM NO. : 22 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.....(INo31-04, PgNo 205) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & (RA NO. : 2) 23 ITEM NO. : 23 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.....(INo32-04, PgNo 209) ( STATE DSR ) Item Spec: (Bd. L.2 Page No. 368) & (RA NO. : 12) 24 ITEM NO. : 24 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete.....(INo32-15 , PgNo 210) ( STATE DSR ) Item Spec: (Bd. L.10, Page No.370) & () 25 ITEM NO. : 25 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.....(INo32-11, PgNo 209) ( STATE DSR ) Item Spec: (Bd.L.7 Page No. 369) & (RA NO. : 3) 26 ITEM NO. : 26 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed )....(INo24-01 NS, PgNo 175) ( STATE DSR ) Item Spec: (Bd. E. 1 Page No. 287) & (RA NO. : 4) 27 ITEM NO. : 27 Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid ?on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. Complete. A) Flooring....(INo33-44, PgNo 217) ( STATE DSR ) Item Spec: (Bd.M.12 Page No. 385) & (RA NO. : 5) 28 ITEM NO. : 28 Providing and laying vitrified rustic matt stone finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid ?on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. Etc. Complete. B) Skirting....(INo33-45, PgNo 218) ( STATE DSR ) Item Spec: (Bd.M.12 Page No. 385) & (RA NO. : 6) 29 ITEM NO. : 29 Providing and laying vitrified mirror / glossy finish tileshaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. Complete.b) Skirting....(INo33-41, PgNo 217) ( STATE DSR ) Item Spec: (Bd.M. 12 Page No.385) & (RA NO. : 26) 30 ITEM NO. : 30 Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaningetc. complete.....(INo33-06, PgNo 213) ( STATE DSR ) Item Spec: (Bd.M.3 Page No. 380) & (RA NO. : 29) 31 ITEM NO. : 31 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaningetc. complete.....(INo33-35, PgNo 216) ( STATE DSR ) Item Spec: (Bd. M.22 B/Page No. 390) & (RA NO. : 7) 32 ITEM NO. : 32 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete.....(INo33-68 , PgNo 220) ( STATE DSR ) Item Spec: (As directed by Engineer-In- Charge) & () 33 ITEM NO. : 33 Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter. 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2, 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %, 7 Surface Spread of flame BS : 476 - Part 7 Classification 1, 8 Ignitability Evaluation BS : 476 - Part 5 "P" Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa, 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa, 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. A) 2 Track 2 / 4 Sash (Big Series) window frame of size 67 x 54 mm & Sash of size 64 x 47 mm....(INo54-08a , PgNo 516) ( STATE DSR ) Item Spec: (As directed by En-gineer in charge.) & () 34 ITEM NO. : 34 Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessories....(INo39-21 , PgNo 247) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 35 ITEM NO. : 35 Providing and fixing 10 cm PVC nahani trap with grating etc. complete.....(INo42-67 , PgNo 281) ( STATE DSR ) Item Spec: (BD.V 32 A page 551 and as directed by Engineer in charge) & () 36 ITEM NO. : 36 Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete.....(INo42-34 , PgNo 277) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 37 ITEM NO. : 37 Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall....(INo41-58 , PgNo 271) ( STATE DSR ) Item Spec: (Bd.V.23 Page No. 562) & () 38 ITEM NO. : 38 Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall.....(INo41-65 , PgNo 272) ( STATE DSR ) Item Spec: (Bd.V.30 Page No. 565) & () 39 ITEM NO. : 39 Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.....(INo42-27 , PgNo 276) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 40 ITEM NO. : 40 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.....(INo42-56 , PgNo 280) ( STATE DSR ) Item Spec: (BD.V 5 page 551 and as directed by Engineer in charge) & () 41 ITEM NO. : 41 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.....(INo42-28 , PgNo 277) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 42 ITEM NO. : 42 Providing and laying ceramic tileshaving size 30 cm x 30 cm confirming I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. Complete.....(INo33-24, PgNo 215) ( STATE DSR ) Item Spec: (Bd.M.12 Page No. 385.) & (RA NO. : 13) 43 ITEM NO. : 43 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc.complete . Both side polish....(INo33-36 , PgNo 216) ( STATE DSR ) Item Spec: (Bd.M.35 B/Page No.393) & () 44 ITEM NO. : 44 Providing and laying ceramic tileshaving size 30 cm. X 45 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete.....(INo33-26, PgNo 215) ( STATE DSR ) Item Spec: (Bd.M.13 Page No. 386.) & (RA NO. : 14) 45 ITEM NO. : 45 Providing and laying ceramic tileshaving size 30 cm. X 45 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete.....(INo33-26, PgNo 215) ( STATE DSR ) Item Spec: (Bd.M.13 Page No. 386.) & (RA NO. : 27) 46 ITEM NO. : 46 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.....(INo33-34, PgNo 216) ( STATE DSR ) Item Spec: (Bd.M. 3 B/Page No. 380) & (RA NO. : 28) 47 ITEM NO. : 47 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edgesetc. complete. One side polish....(INo33-37 , PgNo 216) ( STATE DSR ) Item Spec: (Bd.M.35 B/Page No.393) & () 48 ITEM NO. : 48 Providing and laying chequered tiles of approved qualityof size 30 cm x 30 cm for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete.....(INo33-66, PgNo 220) ( STATE DSR ) Item Spec: (Bd. M-12 page No. 385) & (RA NO. : 15) 49 ITEM NO. : 49 Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.....(INo39-59 , PgNo 258) ( STATE DSR ) Item Spec: (As directed by engineer-in-charge.) & () 50 ITEM NO. : 50 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.....(INo39-58 , PgNo 257) ( STATE DSR ) Item Spec: (As directed by engineer-in-charge.) & () 51 ITEM NO. : 51 Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc....(INo39-31 , PgNo 250) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 52 ITEM NO. : 52 Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete....(INo40-06 , PgNo 264) ( STATE DSR ) Item Spec: (As directed by Engineer Incharge) & () 53 ITEM NO. : 53 Providing and fixing 15mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete.....(INo41-52 , PgNo 270) ( STATE DSR ) Item Spec: (Bd.V.14 Page No. 557) & () 54 ITEM NO. : 54 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.....(INo42-19 , PgNo 275) ( STATE DSR ) Item Spec: (Bd.V.46, Page No. 576) & () 55 ITEM NO. : 55 Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaningetc. complete. (using 100% crushed sand)....(INo33-53 , PgNo 219) ( STATE DSR ) Item Spec: (Bd. M-12 page No. 385) & () 56 ITEM NO. : 56 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.....(INo35-21 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 57 ITEM NO. : 57 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete.....(INo35-23 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 58 ITEM NO. : 58 Providing and applying two coats of weather shield paint for picture/graphics and lettering as a learning aids on the walls of school building (Which is previously painted with weather shield paint) Including skilled painter/artist/helpers, necessary scaffolding and watering the surface for two days etc.complete.(Rate shall be inclusive of two coats of weather shield paint on plastered surface)....(INo1- , PgNo 801) ( STATE DSR ) Item Spec: (As Directed By Engineer Incharge) & () 59 ITEM NO. : 59 Providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.....(INo35-25 , PgNo 225) ( STATE DSR ) Item Spec: (As directed by Engineer in charge.) & () 60 ITEM NO. : 60 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying / pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed )....(INo26-23 NS, PgNo 185) ( STATE DSR ) Item Spec: (Bd. F. 12 Page No. 304 & B-7, Pg 38) & (RA NO. : 3) 61 ITEM NO. : 61 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.....(INo23-04, PgNo 173) ( STATE DSR ) Item Spec: (Bd.C.8 Page No. 278) & (RA NO. : 5) 62 ITEM NO. : 62Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter. 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2, 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %, 7 Surface Spread of flame BS : 476 - Part 7 Classification 1, 8 Ignitability Evaluation BS : 476 - Part 5 "P" Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa, 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa, 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. B) 3 Track 3 / 6 Sash (Big Series) window frame of size 122 x 54 mm & Sash of size 64 x 47 mm....(INo54-08b , PgNo 516) ( STATE DSR ) Item Spec: (As directed by En-gineer in charge.) & () 63 ITEM NO. : 63 Providing and fixing board displaying information, such as "Name of work, Tender cost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge....(INo6-36 , PgNo 60) ( STATE DSR ) Item Spec: (MORTH 801) & () 64 Providing furniture work to scince lab, computer room as per detailed design and specifications 65 ITEM NO. : 65Royalty Charges for HARD MURUM. Rate = Royalty + surcharge (2%) (211.95 + 4.23 = 216.18 Per Cum)....(INo1-A , PgNo 1) ( STATE DSR ) Item Spec: (As Directed By Engineer Incharge) & () 66 ITEM NO. : 66 Royalty Charges for RUBBLE. Rate = Royalty + surcharge (2%) (211.95 + 4.23 = 216.18 Per Cum)....(INo1-J , PgNo 1) ( STATE DSR ) Item Spec: (As Directed By Engineer Incharge) & () 67 ITEM NO. : 67 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes).....(INo19-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () 68 ITEM NO. : 68 BRICKS Water Absorption (Set of 5 Bricks), CompressiveStrength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).....(INo13-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () 69 ITEM NO. : 69MORTOR Compressive Strength.( Set of 3 Cubes)....(INo27-VQC , PgNo 585) ( STATE DSR ) Item Spec: (As per Standard Specification) & () 70 ITEM NO. : 70 STEEL BAR TESTING Upto 16 mm(Set of 3 Bars)....(INo72-VQC , PgNo 586) ( STATE DSR ) Item Spec: (As per Standard Specification) & () 71 ITEM NO. : 71CERAMIC TILES / VITRIFIED TILES Water Absorption, Moduls of Rapture (Set of 6 Tiles)....(INo16-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () 72 ITEM NO. : 72 FLOORING TILES (MOSSAIC / CEMENT) Flooring of Natural Stone (Kota,Marble, granite,Tandur.etc.)-Water absorption,Specific gravity)....(INo15-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & () 73 ITEM NO. : 73 CONCRETE PAVING BLOCKS Compressive Strength , Water Absorption,(Set of 8 Blocks)....(INo26-VQC , PgNo 584) ( STATE DSR ) Item Spec: (As per Standard Specification) & ()
|
