|
Wood Shed, Cemented Floor And Coverage On Wavy Fiber Cement Tiles Will Be Measured By The Projection Area Of The Provisional Construction Coverage Performed, With Sketch Analyzed And Previously Approved By The Inspection. (M²) The Item Remunerates The Supply Of Materials And Labor Needed For The Execution Of Proper Construction In Wood Intended For Office And/Or Deposit Of Work, Consisting Of: Inner Floor And Concrete Csada-External Panel, Fck 20 Mpa; Walls, Doors And Windows On A Plasticized Plywood Of Nominicity 6 Mm Thick, And / Or Plywood Resinned With Waterproof Sealing And Application Detext In Painting; 3 Or 4Mm Fantasy Glass Windows; Door With Chrome Brass Hinges Chrome And With Georges Type Core; Structure, Support For Coverage Echoes In Pontallets And Tablets Of Pine Or Cedrine And Curse Of Eucalyptus Covered, Fiber -Cement Tile, Wavy Profile Of At Least 5 Mm Thick; Electrical Installation And Acrylic Painting, Accessory Materials For Total Provisional Construction, According To Regulatory Standard. Must Obey Nr 18 (Living Areas). It Also Remunerates A Softeness Throughout The Work And The Complete Sparking Of This Shed., Acrylic Paint On An Outer Wall, Without Gossip (Two Coats) Will Be Measured By The Prepared And Painted Surface Area, Not Discounting Spans Up To 2.00 M² And Not Considering Spread, Fillets Or Frames. Spans Above 2.00 M² Shall Be Deducted In All And The Developed Crops, Fillets Or Frames (M²). The Item Remunerates The Supply Of Paint Sealing For Acrylic Painting; 100% Acrylic Emulsion-Based Paint, Water Soluble, Satin Matte Finish, Accessory Materials And The Labor Required To Perform The Surface Cleaning, Sanding, Dust Removal And Application Of The Sealer, According To The Manufacturers Recommendations; Application Of Acrylic Paint, In Two Coats According To The Manufacturers Specifications, On The Surface Covered With Mass Or Not., Nail Polish With Two Coats, Without Applying Zarcans It Is Measured By The Vertical Projection Area (M²), With The Additions: A) Flat Metal Structure: Multiply The Vertical Projection Area By 2.B) Arco Metal Structure: Vertical And Multiply By 2.C) In Leaked Or With Glass, Railings Or Iron Railings, Through The Area Of The Part Or Projection Of The Set, In The Vertical Or Horizontal Plane, Considered Once, Adding, Once Again, The Sealing Areas Greater Than 15% Of The Initial Area. The Item Remunerates The Supply Of Synthetic Enamel Ink Including Accessory Materials And The Workforce Required For Surface Cleaning, Final Sanding, Removal Of The Salary Dust And Application Of The Ink., Mechanized Compacted Resort By Employing Vibratory Plate Compactor, In Layers Of 20 To 40 Cm. It Will Be Measured By The Volume Of Reaterro In Ditches, Wells Or Caves Performed (M³). The Item Remunerates The Supply Of Labor, Tools And Equipment Required For The Execution Of The Reatermaker With Plaque Compactor, With Existing Or Imported Material, Without Compaction Control. Waterproofing Shoes In Concrete Or Masonry With Bitumnosasira Ink Application Measured By Surface Area With Imprint Application, In The Dimensions Of The Shoe Or Masonry
|
