Tender For Rejuvenation Work In Primary School Kewalpur - Dismentaling Of Existing Plaster Including Disposa ... in India

Work Detail

Tender For Rejuvenation Work In Primary School Kewalpur - Dismentaling of Existing Plaster including disposal of refuse and distance of 200 feet for parapet wall. As Per SI. No.706. 2 E/W in excavation in trenches for foundation including all etc complete. 3 C.C. 1:4:8 in cement fine sand and 40mm gauge B/B including all etc complete. 4 12mm thick Plaster with cement mortar in proportion of 1:4 cement & sand As Per SI No.583. 5 P.C.C. 1:2:4 cement coarse sand and 20mm gauge stone grit, i/c supply of all labour,material and T&P. 6 S/F of Murga Jali including all labour, material T&P etc complete. 7 R.C.C. 1:2:4 cement, coarse sand and 20mm gauge Stone grit including all complete. 8 M.S. work in plain work such as reinforcement. 9 Providing/Fixing of Angle iron D/W/V Frame. 10 S/F of Mild steel Iron Door Sheet & Window including all etc complete. 11 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. As Per DSR No. 8.31 12 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. As Per DSR No. 11.41.2 13 Painting Door and window priming coat and two coat approved superior quality paints, As Per SI. No. 641. 14 P/L of Wall Putty Including all etc complete. 15 Two priming coat and Two coat Emulsion Paint Including all etc. complete. 16 P/L of 80mm thick Rubber Molded (Zicjac) Pevar Interlocking Block including supply of all materials labour & T&P etc. all complete. 17 Red 18 Grey 19 Installation of submersible water pump with T.W. boring of dia, 150mm with 110 mm dia PVC pipe assembly, 2.00 H.P. submercible pump including supply of all accessories starter, panel, etc. & pipe arrangements etc. 20 110mm PVC casing pipe of ISI mark 21 P/F 50mm G.I. Pipe (B) class (DSR 18.12.6) 22 Nylon mesh for filter 23 Plastic dori 24 Solvent cement 25 110mm end cap 26 110mm submercible cap 27 50mm MS clamp 28 50mm GI elbow 29 50mm x 110mm GI nipple 30 2.00 H.P.9 stages submercible pump of ISI mark with automatic panel (Kirloskar) 31 2.5 sqm submercible cable 32 Drilling charges for 6 dia tubewell 33 Pea Gravel 34 2 MS Socket 35 Wiring point for light with 1.0sqm FR P.V.C. insulted multi strand copper cond,. Cable in H.G.P. V.C. conduit conceled in wall with 1.5 sqm copper cond as erth wire drawn in side complete in ll respects with modulr. P.S. No. 131C/187A 36 Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes. As Per DSR No. 18.7.3 37 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore as per DSR No. 18.50.1 38 S/F P.V.C. water storage tank syntex or equivalent. 39 S/F of Multiple Handwash. 40 S/F Sign Board etc. all complete.

Contact Information