Tender For Supply Of Materials And Erection For Construction Of33/ 11 Kv New Sub Station (1X5) Mva Pure Iswa ... in India

Work Detail

Tender For Supply Of Materials And Erection for Construction Of33/ 11 Kv New Sub Station (1X5) Mva Pure Iswar nathpur distt. Pratapgarh And Its Associated 33 Kv And 11 Kv Line In Nagar Nikay Plan 2024-25 On Turnkey Basis (Except Transformer) Under Edc, Pratapgarh - PCC POLE 09 MTR. LONG 4 STP POLE 11 MTR. LONG 5 33 KV V TYPE CROSS ARM 6 33KV MS TOP CHANNEL 7 33KV DISC FITTING (B&S) DOG/RACOON 70 KN 8 COMPOSITE POLY. DISC INSULATOR 70KN B&S 9 33 KV COMPOSITE POLYMER PIN INSULATOR 10 STAY WIRE GI(7/4.0MM) 7/8 SWG 11 STAY ROD 20X1800 M.M. 12 G.I.WIRE 6 SWG 13 G.I.WIRE 8 SWG 14 T-OFF channel (100X50X50X6mm)for 33 kv L 15 33KV GAURDING ANGLE 16 EARTH ROD 2500X20 MM 17 33KV BRACING ANGLE 18 Dropper Channel for 33 KV Line 19 33KV XLPE Al. Cable 3x300mm2 20 A.C.S.R. DOG CONDUCTOR 21 A 1 - Supply of De-Centralised Materials 22 33 KV Cross arm holding clamps with N&B 23 Cable jointing kit for 3x300 XLPE 33 KV 24 33 KV STRAIGHT THROUGH 3X300 XLPE CABLE 25 E- BRACKET WITH BOLT & NUTSFOR 11 Mtr. STP 26 F-BRACKET 27 NUT BOLT WITH WASHER OFF SIZE 28 G.I.PIPE 6 DIA 29 P.G. CLAMP FOR DOG TO DOG CONDUCTOR 30 33 KV BRACING CLAMP WITH NUT & BOLT 31 TOP CHANNEL CLAMPFOR11 MTR.ST POLE 32 PG CLAMP DOG TO PANTHERCONDUCTOR 33 DANGER BOARD WITH CLAMP FOR 33 KV LINE 34 BARBED WIRE 35 Aluminium Paint 36 Red oxide Paint 37 A 2 - Carriage of following material 38 PCC Pole 9 Mtr. Long-179 No., ST Pole 11 Mtr. Long-39 No. 33 KV V-type cross arm, 33 KV M.S Top channel, 33 KV Disc Fitting, 33 KV Disc Insulator, 33 KV Pin Insulator, 3x300 sqmm 33 KV XLPE Cable, ACSR Dog Cond. 33 KV Cable jointing kit 3x300 sqmm, 33 KV Bracing clamp, 33 KV P.G Clamp etc. 39 A 3 - Erection work 40 Digging of pits of size 0.45x1.25x 1.50 mtr. forerection of STP pole 11 mtr. Long. 41 Erection of single STP pole of 11 mtr long. 42 Mounting and fitting of V-type cross arm, 33 KV pin, pin insulator, earth clamp complete in all respect as per drawing of RESPO on single STP pole 11 mtr long. 43 Mounting and fitting T-off Channel with clamp 44 Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp,33 KV pin & pin insulators, disc insulator anddisc fitting on STP . double pole. 45 Fabrication, mounting and fitting of M.S Channel ,33 KV disc insulator anddisc fitting on STP . double pole for riser 46 Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp,33 KV pin & pin insulators, disc insulator anddisc fitting on STP . Tri pole. 47 Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp,33 KV pin & pin insulators, disc insulator anddisc fitting on STP . Four pole. 48 Painting of single STP pole 11 mtr long . 49 Grouting ofST pole 11 Mtr. long with cement, sand and brick bllast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing No. RES-6. Cement, sand, brick, ballast shall be provided by the contractor. 50 Digging of pits of size 0.60x 0.60x1.2 mtr and grouting the stay rod anchor plates 0.45x 0.45x 0.45 mtr with cement, Ganga sand and brick ballast ratio 1:4:8 as per drawing No. RES-16. Cement, sand, brick, ballast shall be provided by the contractor. 51 Complete fitting of stay rod and fastening stay wire including fitting of stay clamp, turn buckle, and making ring of stay wire on both ends in seven strands9” to 12” long. all material provided by the contractor. 52 Earthing of single STP pole by digging 1.00 mtr deep pit and driving the electrodes of MS earth rod and connecting all the metallic parts of poles with earthing rod by G.I. wire and filling pits with soil after completion of earthing.earth wire/all materials shall be provided by the Contractor 53 Laying of A.C.S.R. Dog conductor with thehelpof aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of A.C.S.R. Dog conductor against rubbing on ground, precaution for safety of crops is also to be taken. The work includes jointing of Conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support.All material shall be provided by Contractor such as jointing sleeve binding wire, armour rod etc. 54 Hanging of 3x300 Sqmm 33 KV XLPE Cable for Loop & Air All Materials Provided by the Contractor. 55 Laying 3x300 Sqmm 33 KV XLPE Cable for Along the Road & Road Crossing 33 KV XLPE Cable All material shall be provided by Contractor. 56 Laying 3x300 Sqmm 33 KV XLPE Cable for 33 KV Line Intrench 57 Installation and Fixing of 33 KV Cable Box Jointing Kit 3x300 Sqmm 58 Guarding of 33 KV Line for Road Crossing and Marcket All material shall be provided by Contractor 59 Trimming of tree branch big/small branch which is laying in alignment of33 KV line. 60 Jumpring of33 KV line on 33 KV Bay using P.G. Clamp dog to dog& dog to Panther & binding of jumper and other accessories on terminal gantry at 132 KV S/S Distt. Pratapgarh All material shall be provided by Contractor 61 Name of Work:Supply, Carriage & Erection of 33/11 KV S/S, Pure Ishwarnathpur Distt. Pratapgarh 62 B - Supply of Centralised Materials (Excl. T/F) 63 Terminal Gantry 64 Main Bus Bar with Complete Structure 65 90 Lbs Rail Pieces for T/F (44.64 Kg)/M 66 33 KV Post Insulator 67 Structure for Post Insulator 68 33 KV Bus Isolator 69 Structure for Bus Isolator 70 33 KV Line Isolator 71 Structure for Line Isolator 72 33 KV VCB with structure 73 33 KV Single T/F control Pannel 74 33 KV CT 200/100/1A 75 Structure for CT 76 33 KV PT Outdoor (33 KV/110 volt) 77 Structure for PT 78 Lighting Arrester 79 Structure for Lighting Arrester 80 11 KV 3x185 mm2 XLPECable 81 11 KV 3x120 mm2 XLPECable 82 11 KV Switch gear 600/300/5A 350 MVA I/C 83 11 KV Switch gear 200/100/5A 350 MVA O/G 84 24 Volt Battery & Battery Charger 85 Fire Bucket (04 no.) with stand 86 M.S.Channel 125x65x4000mm for cable stand 87 M.S. Earthing Rod 2540x20 mm. 88 M.S Top Channel 100x50x5x2240 mm. 89 M.S. Dropper Channel 100x50x5x2028 mm. 90 PCC Pole 8.5 Mtr. Long 91 G.I. wire 8 swg 92 Stay wire 93 Stay Set 94 Bracing of PCC double pole 95 ACSR Dog Conductor 96 63 KVA T/F 97 11 KV Fuse set with fixing clamp 98 11 KV TPMO 99 Sub Station Base Angle 100 B 1 - Supply of De-Centralised Materials 101 Control cable 4x2.5 mm2 102 Control cable 2x2.5 mm2 103 11 kv Cable Jointing kit 120 mm.sq. 104 11 kv Cable Jointing kit 185 mm.sq. 105 LT PVC Armoured Al. Cable (4x24 sqmm) 106 Rabber Matting 107 Earth Wire Clamp for PCC Pole 108 Stay Clamp for PCC Pole 109 Top channel Clamp for PCC Pole 110 Dropper channel Clamp for PCC Pole 111 G.I. Strips of size 35x6 mm 112 G.I. Strips of size 50x6 mm 113 G.I. Pipe 2 dia 114 PG Clamp for dog conductor 115 T&P Instruments for s/s (Meggar plire hand gloves etc.) 116 Table (Wooden) 117 Chair (Wooden) 118 Fan 119 Street Light shed flat 120 B 2 - Carriage of following material 121 PCC Pole 8.5 Mtr. Long-06 No., Structure of LA-01 No., 33kv Isolator-02 No., 33 KV CTs-03 No., Single T/F Control Pannel-01 No., 33kv VCB -01 No. Incoming Pannel-01 no, Battery & Battery Charger-01 noand other associated accessiories etc. 122 B 3 - Erection work 123 Laying of Earth Mat (Outdoor) as per Resp. 124 Laying of Earth Mat(Indoor) as per Resp. 125 Construction of Terminal Gantry and Bus Bar Gantry as per resp. 126 Construction of complete T/F plinth size 3mx3m x1.05 Mtr. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) Top of plinth is to be C.C. work in the ratio of 1:3:6 fitted with 3 Mtr. long, 90 lbs, 2Nos. rail pieces. Cement mortar is to be used in 1:3 ratio. Cement, concrete material, bricks used in plinth shall be supplied by the contractor. 6” stone grit is to be laid before foundation start for whole plinth. Except rail pieces all material shall be provided by the contractor . 127 Erection of complete structure and 33 KV Bus Isolator (before and after bus bar as required) in switch yard as per RESPO drawing. Work also includes construction ofplinth of size 0.45x0.45x1.05 cum (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.)with cement,coarse sand and ballast in ratio 1:3:6 and plastaring of plinth with cement & sand in ratio 1:4 including digging of pits & backfilling. All concreting material like cement, ballast, sand labour & T&P etc.shall be provided by the contractor. 128 Erection of complete structure and 33 KV lightening arrestor in switch yard as per RESPO drawing. Work includes erection of 3 Nos.33 KV lightening arrestor, its fitting and mounting with care. Grouting of structure with cement, coarse sand and ballast in ratio 1:3:6, construction of plinth size 0.45x 0.45x1.05 cum. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) Plastering the plinth with cement mortar with cement and sand in ratio 1:4. All concreting material like cement, ballast, sand labour & T&P etc.shall be provided by the contractor. 129 Erection of 33 KV post Insulators with complete structure in Switch yard as per RESPO drawing. Work includes Installation of 1X3 Nos. 33 KV Post Insulator on structure complete as per schedule, grouting of Structure with Ist class brick ballast in the ratio of 1:3:6, plastering in the ratio of 1:3 on plinth size 0.45x0.45x1.05 Cum. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) The work is to be done strictly as per RESPO drawing. All the material like post Insulator cap, Cement, concrete material used for above work will be provided by the Contractor. 130 Erection of complete 33 KV VCB with structure 0.7x0.7x1.05 cum. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation or made as per requirement.) in switchyard and grouting of VCB structure by cement, sand, brick ballast mortar in ratio 1:3:4. Work includes complete fitting of VCB on structure carefully with making all connections of control cable for operating the VCB . All other item like cement, concrete material, T&P shall be provided by the contractor. 131 Erection of complete 33 KV C.T (03 NO) with structure (0.45x0.45x1.05) cum. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) in switchyard and grouting of C.T. structure by cement, sand, brick ballast mortar in ratio 1:3:4. Work includes complete fitting of C.T. on structure carefully with making all connections of control cable . All other item like cement, concrete material, T&P shall be provided by the contractor. 132 Installation of 33 KV single transformer control pannel, 1 No. Incoming and 2 No. Outgoingin the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. Work includs fitting of all accessories in all respect with complete connection of control cable with pannel.All material will be provided by the Contractor except VCB and CRP. 133 Construction of cable trenchs with top cover and laying of control cable forVCB, C.T. & T/F Control Pannel etc. as per direction of engineer. trenchs to be 12” wide and 9” deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 R.B. wall 9” wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. All materialwill be provided by thecontractor. 134 Earthing of all Structures (as LA. CT, VCB, Isolator, etc.) erected in the yard with 35x6 mm. G.I. stripfully welded at both ends and to be connected with earthmat, . 135 Earthing of 11 KV indoor equipments, switchgears as per RESSPO Drawing. with G.I. Strip of Size 35x6 mm.G.I. stripfully welded at both ends and to be connected with earthmat, 136 Earthing of T/F neutral with G.I Pipe (Specification - 2 dia 60 feet depth) Up to wet earth, making delta with space of 02 feetand connecting it with 50x6 mm. G.I. strip to T/F neutral giving half round turn at the T/F. 137 Two Separate body Earthing ofT/F with G.I Pipe(Specification - 2 dia 60 fit depth) Up to wet earth and connecting it with 50x6 mm. GI strip. 138 Erectionof DP withPCC pole 8.5 mtr long with all accessaries and Grouting of the PCC Pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing No. RES-6.(Cement, sand, brick, ballast shall be provided by the contractor.) 139 Laying and stringing of ACSR Dog conductor from bus to bar L.A, VCB, C.T., Post insulator and 33/11 KV T/F, Isolator etc. properly with jumpering with P.G. Clamp, . PG Clamp shall be provided by the contractor except ACSR Dog conductor. 140 Painting of all structure and equipment inside the switch yard with two coats of red oxide primer and thereafter two coats of aluminium paint, giving silver white finish, painting is to be done after proper cleaning of the structures. paint, primer, thinner etc. required shall be provided by the contractor himself. 141 Installation of24 Volt Battery and Battery Charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. Fixing ofrag bolt. 142 Laying of 11 KV 3x300/3x185/ 3x120 Sqmm. XLPEcable by digging 0.75 Mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it RMT and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor. 143 Fixing and termination of Outdoor/ Indoor Heat shrinkable Cable boxesof size 3 x300/3x185/3x120 sqmm.XLPE cable. Boxes will be supplied by the Contractor 144 Commissioning of the Power transformer protection33KVVCBs and 11KV VCBs CT&CRP. 145 Fabrication and grouting of cable stand for power transformer 146 Sundries ( as per site requirement/emergency work) 147 Name of Work:Supply, Carriage & Erection of 02 nos.new 11 KV Line, Purekeshav rai and Nirvachan centre. 148 C- Supply of Centralised Materials 149 8.5 Mtr PCC Pole 150 11 Mtr STP 151 11 KV V type cross arm 65x65x6 mm, M S Angle 152 Bracing Angle with clamkp for 11 KV 153 Polymeric 11KV Pin Insulator 154 T off Channel 155 11 KV Top Channel 156 Stone Pad (300x300x75 mm) 157 11 KV Disk Fitting 45 KN 158 Weasel Conductor 5x3+3% Sag 159 G.I. Wire 6 SWG 160 G.I. Wire 8 SWG 161 11 KV Disk Insulator 45 KN 162 Stay Set 163 Stay Wire 164 11 KV 3x120 sqmm XLPE Cable 165 Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc 166 Guarding Angle for PCC Pole 167 C 1 - Supply of De-Centralised Materials 168 11 KV Jointing Kit 3x120 sqmm 169 11 KV E Bracket 170 11 KV F Bracket 171 G.I. Pipe 172 Number Plate with clamp and Nut & Bolt 173 Danger Plate with clamp and Nut & Bolt 174 G I Barbed Wire 175 Stay Clamp 176 Nut Bolt and washer all sizes 177 Clamp for 11 KV V type Cross arm with bolts and nuts 178 Earthing of Pole by M S Earthing Rod 20 x 2500 mm and 6 SWG earthing wire etc 179 Concreting of Support (0.268CuM) 180 HDPE Pipe 6 dia 181 C 2 - Carriage of following material 182 ST Pole 11 Mtr. Long-04 No. 11 KV V-type cross arm, 11 KVM.S Top channel, 11 KVDisc Fitting, 33 KV Disc Insulator, 11 KV Pin Insulator,ACSR Weasel Cond. 11 KV Cable jointing kit 3x120 sqmm, 11 KV Bracing clamp etc. 183 C 3 - Erection work 184 Digging of pits of size 0.45x1.25x 1.50 mtr. forerection of PCCpole 09 mtr. Long. 185 Erection of single PCCpole of 8.5 mtr long. 186 Mounting and fitting of V-type cross arm, 11 KV pin, pin insulator, earth clamp complete in all respect as per drawing of RESPO on single PCC pole 8.5 mtr long. 187 Mounting and fitting T-off Channel with clamp 188 Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp,11 KV pin & pin insulators, disc insulator anddisc fitting on PCC . double pole. 189 Fabrication, mounting and fitting of M.S Channel , 11 KV disc insulator anddisc fitting on PCC . double pole for riser 190 Painting of single STP pole 11 mtr long . 191 Grouting ofPCC pole 8.5 Mtr. long with cement, sand and brick bllast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing No. RES-6. Cement, sand, brick, ballast shall be provided by the contractor. 192 Digging of pits of size 0.60x 0.60x1.2 mtr and grouting the stay rod anchor plates 0.45x 0.45x 0.45 mtr with cement, Ganga sand and brick ballast ratio 1:4:8 as per drawing No. RES-16. Cement, sand, brick, ballast shall be provided by the contractor. 193 Complete fitting of stay rod and fastening stay wire including fitting of stay clamp, turn buckle, and making ring of stay wire on both ends in seven strands9” to 12” long. all material provided by the contractor. 194 Earthing of single PCC pole by digging 1.00 mtr deep pit and driving the electrodes of MS earth rod and connecting all the metallic parts of poles with earthing rod by G.I. wire and filling pits with soil after completion of earthing.earth wire/all materials shall be provided by the Contractor 195 Laying of Weasel conductor with thehelpof aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of Weaselconductor against rubbing on ground, precaution for safety of crops is also to be taken. The work includes jointing of Conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support.All material shall be provided by Contractor such as jointing sleeve binding wire, armour rod etc. 196 Hanging of 3x120 Sqmm 11 KV XLPE Cable for Loop & Air All Materials Provided by the Contractor. 197 Laying 3x120 Sqmm 11 KV XLPE Cable for Along the Road & Road Crossing 11 KV XLPE Cable All material shall be provided by Contractor. 198 Installation and Fixing of 11 KV Cable Box Jointing Kit 3x120 Sqmm 199 Guarding of 11 KV Line for Road Crossing and Marcket All material shall be provided by Contractor 200 Trimming of tree branch big/small branch which is laying in alignment of11 KV line.

Contact Information