|
0011873 - Steel Shelf 6 Shelves - Approximate Dimensions 920 (L) X450 (P) X1980 (H) Mm. All Bookcase Components Should Be Made Of Sae 1008 To 1012 Steel Sheets, Being Columns In Plate #14 And Shelf Plate #22. The Bookshelf Must Be 04 Columns With Section In L, Thickness Of 2, 00Mm (#14), 35Mm Tabs Perforated In 50Mm Step For Sheight Adjustment Of The Shelves. Six (06) Removable Shelves That Enable Height Adjustment, With A Thickness Of 0, 75 Mm (#22), Each Shelf Should Have Two Omega Reinforcements, In The Same Thickness Of 0, 45 Mm (#26), The Front And Posterior Part Of Each Shelf Should Contain 3 Folds To Provide Greater Resistance And Lower Risk Of Accidents, Minimizing The Cutting Edges. The Shelves Will Be Joined To The Columns Through 08 Hexagite Screws With Nuts. Sides And Background With Two Boosy Pairs Each In The Shape Of X, With Thickness Of 2, 0Mm (#14), With Edges Attached To The Columns By Screws And Nuts. The Shoes Should Consist Of Polymeric Material Arranged Individually At The Bottom End Of Each Column, Avoiding The Direct Contact Of The Steel With The Floor. Warranty, Issued By The Furniture Manufacturer, Of At Least 01 (One) Year Against Any Manufacturing Defects., 0007400 - 4 Drawers Steel File - Sae -Se -1012 Steel Steel File, With Dimensions Of 1330X470x600mm (Axlxp), Crystal Gray And Textured Finishing, Three Internal Reinforcements, Vertical Format. Omega, Soldiers In Each Side Structure, 04 (Four) Drawers, With A Capacity Of At Least 7 Kg Each, Sliding System Through Nylon Pulleys, Pullers Stamped On The Drawer Structure Itself, Side Rods To Support Folders, Tag Holders Stamped On The Steel Structure Itself, Lock With 02 Keys. Finishing Of Metal Parts In Fully Automated Epoxy-Phi-Pipo Electrostatic Painting With Anti-Ruginous Pretreatment. Warranty, Issued By The Furniture Manufacturer, Of At Least 01 (One) Year Against Any Manufacturing Defects., 0007401 - Steel Cabinet - Cabinet Made Of Sae -1008 Steel Step As -1012 With Dimensions Of 1980X900x450mm, Consisting Of 02 Doors With Side Pivot, Each Port With 3 Internal Hubes, Has 04 Reinforced Shelves With 3 Folds On The Front And Rear And Two Folds On The Sides, Should Have A Label Holder That Allows The Placement Of The Label On The Inside Of The Door And Stamped On The Door In Low Relief, In Accordance With Nr 24, Each Door Should Offer Two Hole Ventilation Systems. Warranty, 0007402 - 8 Seater Wardrobe Cabinet, 1 Upper, 2 In The Middle Of The Body And 1 Lower (Each Door Approximately 272X420 Mm), Divided Into 2 Bodies Made Of Sae -1008/1010 Steel Plate With 0, 75Mm (#22) Thick. Approximate Dimensions: 625 (L) X420 (P) X1820 (H) Mm. Opening Mechanism Of The Doors Should Be Pivoting Type, Side To The Right, With Two Internal Hinges On Each Door. The Hinges Should Be Formed By Two Bodies With Two And Three Sheaths, Respectively. The Positioning Of The Bodies Must Be Concentric Between The Two Cylindrical Faces And Joined By A 4 Mm Diameter Pin. The Maximum Height Of The Two Hinges, After Union, Should Be 60 Mm. Each Door Shall Contain Two Sets That Facilitate Air Circulation, One At The Top And One At The Bottom. Individualized Identification System By Doors,
|
