Tender For Additional Works At Fsbs Of Visakhapatnam City in India

Work Detail

tender for Additional Works At Fsbs Of Visakhapatnam City--7.00 EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - FOUNDATION OF BUILDING (APSS 308). - for Young Bull Shed 1.00 CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, (Excluding Seigniorage Charges) ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOUNDATION BED AND UNDER STONE SLAB FLOORING. (APSS NO: 402). for Young Bull Shed 7.00 RE-FILLING WITH EXCAVATED EARTH IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT. (APSS NO. 309 & 310) - for Young Bull Shed 7.00 MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FOR BASEMENT (APSS NO. 501&504). - for Young Bull Shed 4.60 "MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FOR GROUND FLOOR (APSS NO. 501&504). - for Young Bull Shed " 190.00 PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. (Excluding Seigniorage Charges)GROUND FLOOR (APSS NO: 901&904) - for Young Bull Shed 190.00 PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908) - for Young Bull Shed 90.00 DRILLING OF BORE WELL BY DOWNING THE HOLE HAMMER AND DRILLING TO A FINISHED DIA OF 165 MM DIA IN ALL FORMATIONS SUITABLE FOR DOWN THE HOLE HEAMMER AND DRILLING IN MEDIUM ROCKS TO HARD ROCKS FORMATION ETC,. AND REMANING THE BORE TO SUIT INSETION OF 180 MM DIA UPVC CASING PIPE, COUPLINGS CAPS AND OTHER RELEVANT MATERIALS REQUIRED UP TO THE DEPTH AS DIRECTED BY THE DEPT. BUT EXCLUDING THE COST OF CASING PIPE, COUPLINGS, CAPS BUT INCLUDING TRANSPORATIONS OF DRILLING RIGS AND SUPPORTING VEHICLE FORM VILLAGE TO VILLAGE AND INCLUDING BORE DEVELOPMENT (FLUSHING THE BORE WELL AT AN AVERAGE PRESSURE OF 100 PSI) CONDUCTING YIELD TEST ABOUT 1 HOUR INCLUDING CREW CHARGES , ALL OTHER CHARGES REQUIRED IN FIXING OF PIPES & ASSEMBLING AS STIPULATED IN THE TECHINICAL CONDITIONS OF THE P.R. DEPT. AND ENTIRE WORK SHOULD BE CARRIED OUT AS PER THE IS: 2000 PART -1 & 2, 1979 ( ALL DEPTHS.)- for Young Bull Shed 80.00 MANUFACTURING, SUPPLYING AND DELIVERY OF 165 MM UPVC PIPES FOR PORTABLE WATER SUPPLIES OF 6KG/ SQCM CONFORMING TO IS 4985/2000 (THIRD REVISION ) WITH BELL ENDS (SOCKET) AS PER SPECIFICATION IN LIGHT GREY /NATURAL IVORY GREY ANY OTHER COLOUR EXCEPT WHITE INCLUSIVE OF TRANSPORTATION ANY WHERE IN A.P ETC,. COMPLETE INCLUDING ALL TAXES FOR FINISHED ITEM OF WORK.- for Young Bull Shed 10.00 MANUFACTURING, SUPPLYING AND DELIVERY OF 250 MM UPVC PIPES FOR POTABLE WATER SUPPLIES OF 6KG/ SQCM CONFORMING TO IS 4985/2000 (THIRD REVISION ) WITH BELL ENDS (SOCKET) AS PER SPECIFICATION IN LIGHT GREY /NATURAL IVORY GREY ANY OTHER COLOUR EXCEPT WHITE INCLUSIVE OF TRANSPORTATION ANY WHERE IN A.P ETC,. COMPLETE INCLUDING ALL TAXES FOR FINISHED ITEM OF WORK.- for Young Bull Shed 1.00 SUPPLY AND FIXING OF 165 MM DIA BORE WELL CAP INCLUDING COST AND CONVEYANCE OF ALL MATERIALS ETC, COMPLETE- for Young Bull Shed 12.00 LABOUR CHARGES FOR SLOTING OF PIPES INCLUDING ALL LABOUR CHARGES AND SLOTING AS PER DIRECTIONS OF THE DEPARTMENT OFFICERS ETC., COMPLETE FOR 165 MM DIA BORE WELL.- for Young Bull Shed 1.00 "Supply and Transportation of 3 HP 15 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 4"" Bore well. Makes : As per list of recommended brands as category II. . KIRLOSKAR, CRI, SUGUNA,KSB OR EQUIVALENT - for Young Bull Shed " 120.00 MANUFACTURING, SUPPLY, DELIVERY AND INSTALLATION OF 50MM HDPE PIPES CONFIRMING TO IS 4989-1995 6KG/SQ.CM INCLUDING TRANSPORTATION TO ANY WHERE IN AP, EXCLUDING ALL TAXES (SUPPLY UP TO 90 MM DIA. IN COIL & ABOVE 90 MM DIA. STRAIGHT LENGTH.) INCLUSIVE OF ALL NECESSARY ACCESSORIES ETC., COMPLETE INCLUDING FIXING NECESSORY FITTINGS LIKE BENDS PLUGS, COUPLER, JUNCTIONS, TEESETC., WITH SOVENT JOINT AS PER STANDARD INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.- for Young Bull Shed 150.00 "Supply of 3 Core 10.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Including Cost and Conveyance of all materials to site, Labour etc., Complete for finished item of Work.- for Young Bull Shed " 5000.00 "PROVIDING AND PLACING ON TERRACE POLYTHELENE WATER STORAGE TANKS (AT ALL FLOOR LEVELS) . DOUBLE LAYER APPROVED BRAND AND MNUFACTURE WITH COVER AND SUITABLE LOCKING ARRANGEMENTS MAKING NECESSARY HOLES FOR INLET & OUTLETS AND OVERFLOW PIPES BUT WITHOUT FITTINGS & BASE SUPPORT FOR TANKS, MAKING GOOD THE SAME TO ENSURE LEAK PROOF WITH AN APPROPRIATE MASONARY PLATFORM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC.,COMPLETE FOR FINISHED ITEM OF WORK AS DIRECTED BY THE ENGINEER -IN- CHARGE- for Young Bull Shed " 100.00 "SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2"" TO 2"") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5 - for Young Bull Shed " 100.00 "SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2"" TO 2"") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 40.60 MM OD PIPES SDR 13.5 - for Young Bull Shed " 2.00 "SUPPLYING AND FIXING 25 MM NB SIZE GM GATE(PEET) VALVE AS PER IS - 778, CLASS-I, INDIAN MAKE HEAVY TYPE, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. - for Young Bull Shed " 1.00 Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of complete.,- for Young Bull Shed 20.00 EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - FOUNDATION OF BUILDING (APSS 308).- for drain new young bull shed 30.00 CEMENT CONCRETE (1:5:10) PROP. USING 40MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, (Excluding Seigniorage Charges) ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOUNDATION BED AND UNDER STONE SLAB FLOORING. (APSS NO: 402). - for drain new young bull shed 16.70 "RE-FILLING WITH EXCAVATED EARTH IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT. (APSS NO. 309 & 310) - for drain new young bull shed " 7.00 "MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK FOR BASEMENT (APSS NO. 501&504). - for drain new young bull shed " 3.35 "MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, (Excluding Seigniorage Charges), SCAFFOLDING AND CURING ETC., CPOMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK (APSS NO. 501&504). - for drain new young bull shed " 190.00 GRONOLITHIC CONCRETE FLOORING 20 MM THICK WITH (1:1:2), USING 6MM TO 12 MM SIZE HARD GRANITE MACHINE CRUSHED METAL LAID OVER CC BED ALREADY LAID OR RCC ROOF SLAB, IN ALTERNATE PANELS OF SIZE NOT EXCEEDING 1.50 M X 1.50 M AND FINISHING THE TOP SURFACE TO REQUIRED SMOOTHNESS AND SLOPES AND THREAD LINING INCLUDING COST OF ALL MATERIALS LIKE CEMENT, METAL, SAND AND WATER ETC., COMPLETE, INCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, - for new young bull shed 100.00 "PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. (Excluding Seigniorage Charges)GROUND FLOOR (APSS NO: 901&904) - for drain new young bull shed " 12.00 CEMENT CONCRETE (1:2:4) PROP. USING 20MM HARD GRANITE MACHINE CRUSHED METAL WITH MACHINE MIXING UP TO PLINTH LEVEL INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. FOUNDATION BED AND UNDER STONE SLAB FLOORING. (APSS NO: 402). - for drain new young bull shed 20.00 SUPPLYING, LAYING, JOINTING AND TESTING OF 160 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 6 Kg/cm2 CONFIRMING TO IS:13592-1992, AND JOINTING WITH SOLVENT CEMENT INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.- for new young bull shed 1120.00 "SUPPLY AND FIXING STRUCTURAL STEEL MS TUBES OF ANY DIA INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES FOR FABRICATION & FIXING AS DIRECTED BY THE ENGINEER-IN-CHARGE ETC., COMPLETE FOR FINISHED ITEM OF WORK FOR ROOF TRUSS M.S TUBES OF ALL SIZES IN ALL FLOORS- for new young bull shed " 72.00 "PROVIDING ROOFING WITH 0.50 MM THICK GALVANIZED / PRE-PAINTED G.I PROFILED SHEETS FIXED TO THE PURLINS WITH 14 SIZE SELF DRILLING SCREWS WITH NEOPRENE WASHER. SIDE LAPS ARE STICHED WITH SELF TAPPING / DRILLING SCREWS. END LAPS ARE TO BE SEALED WITH 25 X 3 MM BUTYL TAPE. THE SHEETS ARE PROVIDED WITH ANTI CAPILLARY GROVE INCLUDING ALL INCIDENTAL & OPERATIONAL CHARGES COST AND CONVEYANCE OF ALL MATERIALS TO SITE ETC., COMPLETE FOR FINISHED ITEM OF WORK. - for new young bull shed " 7.30 Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work- for new young bull shed- for new young bull shed 20.60 Providing dadooing to internal walls with glazed ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work- for new young bull shed 4.20 (TOILET DOOR SHUTTER) 0.75 X 2.1M SUPPLYING POSITIONING AND FIXING WPC SOLID DOOR SHUTTER OF 28MM THICK OF ECHON OR EQUIVALENT MAKE INCLUDING WPC DOOR FRAME MADE WITH WPS SCANTLINGS OF SIZE 100MM X 63 MM OF MAKE FUTURE PLY / WOOD PLUS / LIFE TIME , INCLUDING 6 NOS OF 'Z' HOLD FASTS OF SIZE 230 X 40 X 3MM , 4 NOS OF 100 MM BUTT HINGES, 2 NOS. 125MM LONG DOOR HANDLES, 1 NOS ALDROP OF SIZE 200 MM LONG, 2 NOS. OF 200MM LONG TOWER BOLTS, WITH BOLTS, NUTS, NF SCREWS, INCLUDIMG CAST AND CONVEYANCE OF ALL MAERIALS TO SITE, LABOUR CHARES FOR MAKIN THE FRAMES, SHUTTER, MINOR EXTRA FIXTURES REQUIRED IF ANY AS DIRECTED BY THE ENGINEER-IN-CHARG OF THE WORK COMPLETE FOR FINISHED ITEM OF WORK (ALL FITTINGS AND FIXTURES SHOULD BE OF ALUMINIUM, ISI MARK, GOT APPROVED BY THE ENGINEER-IN-CHARGE). (APSS NO: 1001 &1002) - for new young bull shed 43.20 "PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212). - for new young bull shed " 50.00 "PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908) - for new young bull shed " 10.00 "SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2"" TO 2"") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 22.20 MM OD PIPES SDR 13.5- for new young bull shed " 10.00 "SUPPLY AND LAYING OF ASHIRVAD / AJAY / ASTRAL FLOW GUARD OR EQUIVALENT CPVC PIPES AND FITTINGS TO MEET THE REQUIREMENT OF ASTM-D 2846 AND ARE PRODUCED IN CTS (COPPER TUBE SIZES 1/2"" TO 2"") ASHIRWAD FLOWGUARD SDR 13.5 PIPES ARE MADE FROM IDENTICAL CPVC COMPOUNDS HAVING THE SAME PHYSICAL PROPERTIES FOR HOT AND COLD WATER (IS 15778-2007) - 28.60 MM OD PIPES SDR 13.5 - for new young bull shed " 4.00 "SUPPLYING AND FIXING 15 MM DIA BIB TAP WITH FLANGE CHROMIUM PLATED JAQUAR MAKE QUEEN SERIES INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. - for new young bull shed " 2.00 "SUPPLYING AND FIXING 12.70 MM DIA ANGLE STOP COCK (400 GRAMS)INDIAN MAKE, HEAVY DUTY OF APPROVED ISI BRAND INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR ETC., COMPLETE FOR FINISHED ITEM OF WORK. - for new young bull shed " 10.00 SUPPLYING, LAYING, JOINTING AND TESTING OF SINGLE SOCKET 110 MM DIA PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING EXCAVATION OF TRENCHES AND SOCKET PITS IN ANY SOIL (EXCEPT ROCK REQUIRING BLASTING) UP TO 0.91M DEPTH AND REFILLING WITH EXCAVATED SOILS, WATERING, TAMPING, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.- for new young bull shed 10.00 SUPPLYING AND LAYING 110 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND JOINTED WITH SOLVENT CEMENT INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.- for new young bull shed 10.00 "SUPPLYING AND LAYING 75 MM DIA SINGLE SOCKET PVC / SWR PIPES OF APPROVED MAKE OF 4 Kg/cm2 CONFIRMING TO IS:13592-1992, WITH NECESSARY UPVC PIPE CLIPS @ 5' INTERVALS AND LABOUR CHARGES FOR LAYING, FIXING, AND COMMISSIONING THE PVC PIPES INCLUDING COUPLERS/ BENDS/TEES ETC., INCLUDING FIXING NECCESSARY FITTINGS LIKE BENDS, PLUGS, COUPLERS, JUNCTIONS, TEES ETC., WITH SOLVENT JOINTING AS PER STANDARDS INCLUDING CUTTING OF WALLS AND FLOORS AND MAKING THE SAME GOOD, INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. - for new young bull shed " 2.00 SUPPLYING AND FIXING INDIAN MAKE FLAT BACK WHITE GLAZED WASH HAND BASIN (HSW/PARRYWARE/NEYCER) IST QUALITY CONFIRMING TO IS: 2556-PART-4 :1972 OF SIZE 550 X 400MM SINGLE C.P. PILLAR COCK AS APPROVED BY EXECUTIVE ENGINEER WITH WASTE FITTINGS LIKE RUBBER PLUG, CHAIN, 32MM NOMINAL SIZE C.P. FITTING WITH PARALLEL PIPE THREAD CONFIRMING TO IS : 2963-1979 AND FITTED WITH 15MM NOMINAL BORE CHROMIUM PLATED PILLAR TAP OF 1ST QUALITY INDIAN MAKE 400GRAMS SEICO/SENIOR/NICE/ESSO OR EQUIVALENT COMPLETE WITH STANDARD CI BRACKETS, AND PAINTING TO ALL IRON FITTINGS WITH 2 COATS OF SYNTHETIC ENAMEL PAINT OF APPROVED COLOUR AND MAKE INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK. INCLUDING WOODEN BLOCK INCLUDING CUTTING THE WALLS WHEREVER NECESSARY AND MAKING THE SAME GOOD FOR FINISHED ITEM OF WORK.- for new young bull shed 2.00 SUPPLY AND FIXING IN POSITION EUROPEAN TYPE WATER CLOSET OF BEST INDIAN MAKE WHITE GLAZED WITH 100 MM 'P' TRAP, PLASTIC SEAT AND LID FOR EUROPEAN WATER CLOSET AND BUFFERS AS PER IS 2548-1963 AND PROVIDING PVC LOW LEVEL FLUSHING SYSTEM OF 8 LITRES CAPACITYOF PARRYWARE SLIMLINE (WHITE) WITH INTERNAL COMPONENTS AND SHORT BEND, 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, INCLUDING CUTTING THE WALLS AND FLOORS AND MAKING GOOD THE SAME, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.- for new young bull shed 1.00 CONSTRUCTION OF SLUDGE PITS (FOR TWIN PIT FLUSH TOILET SYSTEM) USING LOCALLY AVAILABLE RCM PRECAST WELL STEINING RINGS 6 NOS 1.2M DIA AND 30 CM HEIGHT TO FORM ABOUT 1.5M DEEP SLUDGE PIT USING 30MM THICK SHAHABD/CUDDAPAH TILE SPACERS IB BETWEEN RINGS INCLUDING EARTH WORK EXCAVATION IN ALL SOILS EXCET ROCK REQUIRING BLASTING OST AND CONVEYANCE OF RCM RINGS TO SITE LAYING THEM IN GROUND OVER PCC ANGULAR BED OF (1:6:10) 230MMX100MM THICK FOR CIRCULAR RING PORTION INCLUDING COST AND CONVEYANCE OF ALL MATRIALS AND LABOUR CHARGES AND SEALING THE TOP OF PIT WITH RCM PRECAST COVER 50MM THICK 1.2M DIA INLCUING FIXING CHARGES WITH CM (1:3) LEAK PROOF AND ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES SUCH AS REFILLING SIDE WITH EXCAVATED EARTH ETC., AS DIRECTED BY THE ENGINEER-IN-CHARGE FOR FINISHED ITEM OF WORK.- for new young bull shed 1.00 SUPPLY AND FIXING WHITE GLAZED FLAT BACK HALF STALL URINALS OF 1 ST QUALITY CONFORMING TO IS2556-1995 WITH STANDARD CP SPREADER OF OVERALL SIZE 95X95X57 MM CONFORMING TO IS 2556-PART 6 ,SEC-6-1974 FIXED WITH SCREWS COMPLETRE INDIAN MAKE OF SIZE 590 X375 X390 MM INCLUDING 12.70 MM PVC CONNECTION WITH BRASS UNION NUTS C.P COATED, 38.10 MM C.P WASTE COUPLING, 38.10 MM PVC SOLID WASTE PIPE OUTLET, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES ETC., COMPLETE.- for new young bull shed 1.00 Supply and fixing wall mixer with provision for over head shower and 115 mm long bend pipe with wall flange Jaquar make queen series with 7 years warranty: Chrome plated (BMW-I-152)- for new young bull shed 4.00 "WIRING WITH 2 RUNS OF 14/0.3MM (1.0 SQ.MM) FIRE RETARDANT LOW SMOKE FRLS / HFFR PVC INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FLEXIBLE COPPER CABLE IN EXISTING PIPE WITH 6A ONE WAY MODULAR SWITCH WITH 6 MODULAR COVER FRAME, 3 PLATE CEILING ROSE INCLUDING ALL LABOUR CHARGES ETC., COMPLETE FOR LIGHT, BELL, FAN AND EXHAUST FAN POINTS IN NON RESIDENTIAL BUILDINGS.- for new young bull shed WIRE MAKE: (FINOLEX/RR KABEL/HAVELLS) CEILING ROSE: ANCHOR/ GOLD MEDAL OLIVE /MILLION ZOOM. SWITCHES & COVER FRAME MAKE:LEGRAND ARTEOR/CARBTREE MURANO/GM-ZENOVA" 2.00 "SUPPLY AND FIXING OF BATTEN HOLDER / SLANTING HOLDER IN LIEU OF CEILING ROSE OF LIGHT POINT COMPLETE WITH ALL CONNECTIONS AND ALL LABOUR CHARGES WITH 7W LED, 490LUMENS BULB (FOR NEW INSTALLATION). for new young bull shed HOLDER MAKE: ANCHOR / GOLD MEDAL OLIVE / MILLION ZOOM LAMP MAKE:PHILLIPS / OSRAM / GE / CROMPTON." 15.00 "SUPPLY AND RUN OF 2 OF 36 /0.3MM (2.5 SQ.MM) FRLS/ ZHFR P.V.C. INSULATED 1100V GRADE AS PERIS:694/1990 SPECIFICATION FOR INSULATED FLEXIBLE COPPER CABLE IN EXISTING PIPE FOR RUN OF CIRCUITS, POWER PLUGS & COMPUTER BOARDS INCLUDING ALL LABOUR CHARGES ETC., COMPLETE. for new young bull shed MAKE:FINOLEX/RR KABEL/HAVELLS" 2.00 "Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. for new young bull shed a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight. " 2.00 "Supply of 12"" (300MM) heavy duty exhaust fan with metalic blades and wire guard including cost and conveyance of all materials etc., complete.. for new young bull shed Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DSP / Orient hill air/Halonix /Polycab/G.M. (Xenix)/Goldmedal (Rapido-12)" 2.00 Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete for new young bull shed 6.00 SUPPLY OF INDUSTRIAL WALL FAN OF SIZE 30"(750MM) SWEEP ADJUSTABLE HEIGHT, ALLUMINIUM ALLOY ONE PIECE BLADE WITH DOUBLE BALL BEARING 90 OSCILLATION, CLOSED MESH GUARD HEAVY DUTY MOTOR MAKE : ALMONARD for new young bull shed 6.00 FIXING OF INDUSTRIAL WALL FAN OF SIZE 30"(750MM) SWEEP ADJUSTABLE HEIGHT, ALLUMINIUM ALLOY ONE PIECE BLADE WITH DOUBLE BALL BEARING 90 OSCILLATION, CLOSED MESH GUARD HEAVY DUTY MOTOR MAKE : ALMONARD for new young bull shed 79.50 Supply and run of 2 of 22/0.3mm (1.5 Sq.mm) FRLS/HFFR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make: Polycab/ RPG/ Power flex. for new young bull shed 2.00 Fixing of MV / SV/MH luminaire on wall with 3Cx 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete. for new young bull shed 45.00 EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL for Formation of road (APSS 308). Open Excavation-At Bull Shed 44.40 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. -At Bull Shed 50.00 "FILLING WITH CARTED GRAVEL OBTAINED FROM APPROVED QUARRY IN LAYERS NOT EXCEEDING 15 CM THICK, IN BASEMENTS, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL OPERATIONAL, INCIDENTAL, , LABOUR CHARGES, HIRE CHARGES OF T & P BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO. 309 & 310) -At Bull Shed "

Contact Information