|
Tender For Restoration Work Of Aligarh Provincial Division, Pwd, Aligarh Office. - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In lime mortar.As per DSR-2023 (CH-15, Sl. 15.7.3) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 2 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. As per DSR-2023 (CH-13, Sl. 13.88) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 3 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. As per DSR-2023 (CH-15, Sl. 15.56) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 4 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand). As per DSR-2023 (CH-13, Sl. 13.1.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR-2023 (CH-5, Sl. 5.3) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.As per DSR-2023 (CH-5, Sl. 5.22.6) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 7 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. As per DSR-2023 (CH-13, Sl. 13.26) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 8 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 800x800 mm. As per DSR-2023 (CH-11, Sl. 11.41.3) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 9 Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge. As per DSR-2023 (CH-26, Sl. 26.25) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 10 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams! Litre. As per DSR-2023 (CH-26, Sl. 26.50.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 11 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.531 New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. As per DSR-2023 (CH-13, Sl. 13.53.1)& including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 12 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 Itr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sgm. As per DSR-2023 (CH-13, Sl. 13.45.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 13 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). As per DSR-2023 (CH-13, Sl. 13.46.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 14 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqgm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick. As per DSR-2023 (CH-14, Sl. 14.90.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 15 Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. As per DSR-2023 (CH-14, Sl. 14.92) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 16 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. As per DSR-2023 (CH-11, Sl.-11.3.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 17 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood. As per DSR-2023 (CH-9, Sl.-9.1.2) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 18 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) 35 mm thick shutters. As per DSR-2023 (CH-9, Sl.-9.5.1.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 19 Supply and fixing S.S. Mosquito proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supply of C.P. teak wood batten 8 cm×1cm flat iron 25mm×4mm and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. SOR CH. 9 SI No. 455) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 20 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. 32 mm dia nominal bore. As per DSR-2023 (CH-18, Sl.-18.10.4)& including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 21 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to 1S:8931. 15 mm nominal bore. As per DSR-2023 (CH-18, Sl.-18.52.1)& including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 22 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to |S standards and weighing not less than 810 gms. 15 mm nominal bore. As per DSR-2023 (CH-18, Sl.- 18.52.1)& including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 23 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per 18:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 250 mm. As per DSR-2023 (CH-17, Sl.- 17.10.1.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 24 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length. 15 mm nominal bore. As per DSR-2023 (CH-18, Sl.- 18.21.2.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 25 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. As per DSR-2023 (CH-17, Sl.- 17.7.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 26 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR-2023 (CH-17, Sl.- 17.31) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 27 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. 15 mm dia nominal bore. As per DSR-2023 (CH-18, Sl.- 18.10.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 28 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white. As per DSR-2023 (CH-17, Sl.- 17.19.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 29 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. 25 mm dia nominal bore. As per DSR-2023 (CH-18, Sl- 18.12.3) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 30 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore. As per DSR-2023 (CH-18, Sl- 18.12.6) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 31 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “8S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm. As per DSR-2023 (CH-14, Sl- 14.80.2) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 32 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR-2023 (CH-18, Sl- 18.48) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 33 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sgm). As per DSR-2023 (CH-21, Sl.-21.3.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T. 34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand). As per DSR-2023 (CH-6, Sl. 6.4.1) & including cost of all material, labour, T&P, labour cess and all other taxes but excluding G.S.T.
|
