Tender For Pond Digging/Beautification In Gram Sabha Sarai Khanadev - Clearing And Grubbing Road Land Includ ... in India

Work Detail

Tender For Pond digging/beautification in Gram Sabha Sarai Khanadev - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. 2 Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers trimming bottom and side slopes in accordance with requirement of lines grades and cross section and transporting to the embankment location with a lift up to 1.5m and lead up to 1000m as per Technical Specification Clause 302.3 3 Earth work in Excavation in trenches for foundations, pipes, cable etc in ordinary soil (Loam clay or sand) including lift upto 1.5 m. lead upto 30 m and dressing of sides and rammings of bottom and disposal ofsurplus excavated earth as directed by the Engineer 4 Loosing laveling and compacting original ground supporting embankment to facilitate placement of first layer of embankment scarified to a depth of 150mm mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment Construction as per Technical specification Clause 301.4.1 5 Providing concrete for plain/reinforced concrete with ( 1:3:6) cement: C/sand : Stone aggregate in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 6 Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203,In 1:4 Cement mortar 7 Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401. 8 Plastering with cement mortar (1:4), 12 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 9 Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504 10 S/Fixing of 450 mm Hume Pipe Class NP-3 11 Providing and fixing 1.8 m high GI barbed wire fencing with 2.4 m RCC M15 grade 150 mm x 150 mm concrete post placed every 3 m centre-to-centre founded in M15 grade cement concrete, 0.6 m below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc. complete as per Clause 1705. 12 S/Fixing of Inaguration stone & Photo etc.

Contact Information