Tenders Are Invited For Control, Safety Or Signalling Equipment For Roads-Tma-S-Cover Vejt in Hungary

Work Detail

Control, Safety Or Signalling Equipment For Roads-Tma-S-Cover Vejt. Ta Ta-Mounted Vjt. The Mk Nzrt. He Began To Develop A Concept That Aims To Make The Roads On The Road To Make It Safer By Purchasing New Tools And Creating New Procedures. An Essential Element Of The Concept Is The Installation Of Engineering With New Tools That Manage The Highway Or Expressway In Their Construction. The Devices Purchased Together Are Able To Achieve The Better Visibility Of Diversions And The Rules Of The Drivers Rule -Following. One Of The Elements Of Such Diversion Sets Is A Vjt (A Variable Signboard) That Must Be Secured To The Back Of The Tma (Truck Mounted Attenuator: Truck-Mounted Energy Absorption Unit) Above Tma. It Can Also Display A Colorful, Moving Signal During Operation. The Contracting Authority (Ak) Will Provide Intervention For The Purchase, Installation Of Assets And After-Operation (Injury Service, Component Replacement) For Subsequent Operation. The Installed Equipment And Their Accessories, Apart From The Accident Injury, Need To Be Provided With An Estimated Heaven. Phase I Mobile Vjt* 37 Pcs Ii. Phase Component Led Module 20 Pcs Led Display 3 Pcs Steel Fastener Frame 3 Pcs Control Unit 5 Pcs 24V-230V Power Supply 5 Pcs Ip Protected Box 5 Pcs Remote Control 5 Pcs Service Outflow 1000 Km Survey 20 Hours Installation 40 Hours Repair 20 Hours Programming 5 Hours The Mobile Vjt Is Part Of The Led Display, Steel Fastener, Control Unit, 24- Remote Control. One Of The Elements Of The Diversion Sets Is A Vjj (Variable Signboard) That Must Be Secured To The Back Of The Truck With The Tma (Truck Mounted Attenuator: A Truck-Mounted Energy Absorption Unit) Above The Tma. It Can Also Display A Colorful, Moving Signal During Operation. Vj Should Be Formed From Outdoor Led Panels With At Least Ip54 Protected Led Panels For Modular Interchangeability. The Brightness Of The Modules Should Reach At Least 5000 Cd/M2 When White Radiation). The Control Of Each Module Must Be Designed With A Remote Control, But Programmable Control Unit, So That It Is Possible To Switch The Display On And Off From The Trucks Cab. In Addition, A Feedback Interface Should Be Established So That The User Can See The Capacity Of The Operating Equipment On The Cab And The Displayed Signal Displayed. The Vj Should Be Secured To The Rear Trucks Of The Truck Platform So That The Steel Frame Holding It Is Connected To The Trucks Structure At Least 4 Points, At Least 2 Points To The Rear Racks. The Frame Must Be At Least 20 Mm From The Side Plane Of The Led Panels To Protect The Panel From Punches (Figure 2). If Necessary, Protect The Led Panels From Splashing Water From Above (Liquid Precipitation), And The Protective Roof Should Be Design

Contact Information