Bids Are Invited For Acquisition Of Computer Equipment And Inputs (Computers, Workstations, Notebooks, Acces ... in Brazil

Work Detail

Notbook: Plate: Must Be From The Same Brand As The Manufacturer, Developed Specifically For The Model Offered And Produced In Oem Or Personalized Regime; Should Have At Least One (1) Standard Ddr4 Or Ddr5 Memory Slot; At Least One (1) M.2 Nvme Slot Supporting Ssds With A Maximum Capacity Of 512Gb Or Higher; It Should Have Three (3) Usb Ports, Not Being Used Hubs, Offboard Boards Or Adapters, One (1) Usb-C Port 3.2 Gen 1 (Data Transfers Only); One (1) Usb Port 3.2 Gen 1; One (1) Usb Port 2.0; You Should Have One (1) Audio Jack Of The Type/Microphone Combo; One (1) Hdmi Output For External Video; One (1) Entrance Rj45 Gigabit, Not Being Accepted Adapters; Tpm Version 2.0 Integrated Or By Firmware; Compatible With Windows 11 And Current Linux Distributions. Bios Bios Must Comply With Nist 800-147 Or Iso/Iec 19678, Based On Market Standards In Order To Use Robust Encryption Methods To Verify Bios Integrity Before Passing The Execution Control It; The Model Offered Must Have Certifications: Epeat Gold, Energy Star; The Equipment Should Have A Chip (Hardware), Which Enables Trusted Platform Modules Encryption; The Equipment Should Be Compatible With Safety Software That Installs Persistent Agent On The Equipment Of The Equipment Capable Of Tracking The Equipment In Case Of Loss/Theft/; The Manufacturer Must Have Compatibility With The Proven Uefi Standard Through The Site Http://Www.Uefi.Org/Members, In The Promoters Category; Bios Developed By The Same Manufacturer Of The Equipment In Flash Room. Flash Rom Bios And Can Be Updated Through Management Software. Enable The Password To Access The Bios To Be Activated And Deactivated Via Setup. The Equipment Should Have Software To Diagnose Problems With The Following Characteristics: In Order To Allow The Eq Test, Desktop: Sff Type Enclosure Type; Tool Less Type Cabinet; Have Intrusion Sensor; The Equipment Should Be Delivered With The Fiec Logo, Through Laser Screen Printing, Such Service Should Be Performed By The Equipment Manufacturer. Power Supply The Power Supply Should Be Internal And Have The Following Technical Characteristics: Have Sufficient Power To Support The Maximum Use Of Its Internal Resources, Maintaining Full Functionality Without Loss Of Power Or Component Failure; Support And Operate In 130W 100-240Vac @60Hz.; Track Standard Nbr-14136 Power Cord, With A Minimum Size Of 1, 80 Meters (By Approach) And Amperage Compatible With The Power Source Power. Motherboard The Motherboard Should Be Of The Same Brand As The Manufacturer, Developed Specifically For The Model Offered And Produced In Oem Or Personalized Regime; Shall Have At Least Four (4) Ddr5 Standard Memory Slots; It Should Have Two (2) Pcie Slots Being At Least One (1) Of Them Pattern Pcie X16; One (1) Of The Pcie Slots Should Be 4Th Generation Pcie; At Least Three (3) Slot Pcie M.2 Nvme 2242 Gen 4 Or Higher Supporting Ssds Tlc With A Maximum Capacity Of 1Tb; (Wireless And Storage) Sata Support For 3, 5 Hdds With A Maximum Capacity Of Up To 2Tb To 7200Rpm; You Should Have Ten (10) Usb Connections, With: Minimum Two (2) Usb-A 3.2 Generation 2 Front Usbs One (1) One (1) Usb-C 3.2 (20Gbit/S) Frontal Usb Generation 1 With 15W Loading; Two (2) Usb-A 2.0 Generation Usbs

Contact Information