|
Tender For Special Repair To Bldg No Dy 64 At Alhilal Mil Stn; 1 Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed. 2 S&F pre-painted galvalume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE) 3 M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with selftapping screws as specified. (Colour as approved by GE) 4 Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed. 5 S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Grade E-250) complete all as specified and directed. 6 S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed. 7 M&Lpreparing new surface of steel of any description, over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. 8 Dismantling of wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blanketsany thickness, including cover fillets complete all as specified and directed. 9 Providing and fixing tiled false ceiling of size 595x595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanized steel section (galvanized @ 120 gms/sqm, both side inclusive) consisting of 3600mm long main "T" runner size 24x38mm and 0.30mm thick, 1200mm long cross "T" of size 24x25mm and 0.30mm thick, 600mm secondary cross "T" of size 24x25mm and 0.30mm thick and PPGI wall angle of size 24x24mm and 0.4mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main"T" runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasterners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm center to center along main T and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent = wall, then 1200mm long cross "T" is interlocked between the main "T" at 600mm center to center to form a grid of 1200x600mm and then secondary cross "T" of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally whitecoloured Gyproc 9mm thick Dew Drop/Granular tiles of size 595x595 having foil on back side & PVC paper on front side wrapped around edges to be placed in grid complete all as specified and directed. 10 S&F clip-in false ceiling system with plain steel beveled edged tile (600mm X 600mm) manufactured out of 0.70mm aluminium sheet having powder coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure positive engagement into the spring clip-in profile allowing for demounting of individual tiles. The rigid suspension system consists of rows of galivanized steel 0.50mm thick clip-in profile of size 38mm X 20mm and installed at 600mm c/c spacing to support the tiels clilp-in profiles shall be suspended and jointed from galvanized steel "C" channels of size 10mm X 38mm X 10mm with hold on clamps at spacing as specified by manufacturer. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacturer"s instructions and jointed to the "C" channels. The tiles shall be held in place by pressure clips "C" at spacing as per manufacturer"s instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20mm X 30mm X 20mm and 0.50mm thick with matching the colour with tiles all as manufacturer"s specification/insturctions and including necessary scaffolding all as specified and directed. 11 Demolition ofbrickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. 12 M&L brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed. 13 M&L walling of random rubble stone masonry uncoursed, brought upto course with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. 14 Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpaving"snot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed. 15 M&L PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels or drains etc complete all as specified and directed. 16 M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.(inner girth only measured) 17 M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/footh path finished the surface even and smooth without using extra cement complete all as specified and directed. 18 Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed 19 M&L rendering 15mm thick plaster in CM 1:4 on stone masonry or other than fafir faces of brick wall finished the surface even and smooth without using extra cement complete all as specified and directed. 20 M&L rendering 10mm thick plaster in CM 1:6 on brick/stone masonry or other than fafir faces of brick wall finished the surface even and smooth without using extra cement complete all as specified and directed. 21 M&L preparation of newlyplastered or unplastered surfaces of wallsand applying two coats ofdistemper oil emulsionand applying plaster of paris putty of 1mm thick over newly plastered wall surfaces including preparation of surface even and smooth complete all as specified and directed. 22 M&L preparation of oldplastered or unplastered surfaces of wallsand applying two coats ofdistemper oil emulsionand applying plaster of paris putty of 1mm thick overplastered wall surfaces including preparation of surface even and smooth complete all as specified and directed. 23 M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces of wall complete including preparation of surfaces of walls complete all as specified and directed. 24 M&L preparation of newly plastered surface of walls and applying two coats of white wash complete all as specified and directed. 25 M&L preparation of old plastered surface or unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed. 26 Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed. 27 Taking down chowkats or frames but with shutters (with outtaking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.meach, complete all as specified and directed. 28 S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. 29 S&F rolled mild steel bands,straps,supports or stays for rainwater,ventilating pipes,including bolts,if required; hooks(stays),heavy,for large gates,hook and pintle hinges;large hasps and staples;chains;hand made sliding bolts;clamps;hold fasts;wall ties;hooks for hanging fans;plain angle cleats for securing purlines to wooder trusses conform to Fe-290 Gde E-165 complete all as specified & directed. 30 M&L plain cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed. 31 S&F 35mm thick factory made 2nd class hard wood rail and styleplain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board withcommercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed. 32 S&F 35mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. 33 S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixedwith tinned tacks or galvanised wire staples,complete all as specified and directed. 34 Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. 35 S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed. 36 S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauged shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytailed at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings,hinges,handles tarred hold fast PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 ,complete all as specified. 37 S&F steel ventilator with top hung shutter including hinges, steel peg stay,complete with glazing bars dove tailed or welded complete` all as specified and directed. 38 S&F 100 mm size aluminium butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised, type B-21complete all as specified and directed. 39 S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. 40 S&F 150 mm size extruded aluminium alloy handles, cast type, anodised complete all as specified and directed. 41 S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 42 S&F 300mm, ordinary door springs including roller and roller plate complete all as specified and directed. 43 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 44 M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting/dado etc. laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured to match the tiles complete all as specified and directed. 45 M&LNon-skid,coloured ceramic tiles 7 to 8mm thick (Square/rectangular)area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed. 46 M&LNon-skid, coloured/digital ceramic tiles 7 to 8mm thick (Square/rectangular)area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed. 47 M&L 25 mm thick PCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in leveling course offlooring or levelling course of roof etc, complete all as specified and directed 48 M&L colour chequered cement concrete tiles, machine pressed, factory made of size 300x300x25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, ever and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 49 S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed. 50 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails.M.S. frame shall be covered with heat molded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed. 51 Dismantling 75/100mm dia cast/PVC drain pipe, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directedd. 52 S&F 75mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed. 53 S&F 110mm bore PVC (SWR) pipesingle socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors, complete all as specified and directed. 54 S&F 75mm bore PVC (SWR) bendscomplete all as specified and directed. 55 S&F 75mm bore PVC (SWR) junction,(single T) complete all as specified and directed. 56 S&F 75mm bore PVC (SWR) junction,(single T) equal or unequal with oval access door ,complete all as specified and directed. 57 S&F 110mm bore PVC (SWR) bendscomplete all as specified and directed. 58 S&F 110mm bore PVC (SWR) junction,(double T) equal or unequal with oval access door ,complete all as specified and directed. 59 S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed. 60 S&F 75mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cementcomplete all as specified and directed. 61 S&F 75mm dia PVC (SWR) vent cowl complete all as specified and directed. 62 S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GInipple for inlet, outlet, washout and overflow etc,including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. 63 S&F vitreous China squatting pan orissa pattern size 580mm x 440mm white with integral foot rest (including making good the disturbed portion as per surrounding areas excluding flushing cistern and flush pipe) including PVS (SWR) "S"trap, provn of lime concrete and jointing to flush pipe all as specified. 64 S&F vitreous china wash downEuropian water closet pan (Padestal Pattern), including connection to flush pipe, "P" or "S" trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed. 65 S&F 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe, complete all as specified and directed. 66 S&F vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal including water spider to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush type, grating and union for discharge pipe complete all as specified and directed. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) 67 S&F oval (of any colour as directed) counter wash basin of size 560x470x205mm including CP coupling and waste pipe complete all as specified and directed. 68 S&F waste pipe of polyethylene of low or high density of PVC, 32mm dia, complete all as specified and directed. 69 S&F PVC connection 15mm size, 600 mm long with PTMT nuts complete all as specified and directed. 70 S&F towel rail, 600mm long of PTMT fixed with and including, CP brass screw and wooden/plastic cleats (min wt 190 gms) complete all as specified and directed. 71 S&F soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed. 72 M&L granite (of any size) tile 18 to 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and including 15mm thick screed bed in CM 1:6 and grinding and polishing complete all as specified and directed. 73 M&L 20mm thick granite (of any t ype) tiles machine cut, in skirting/dado laid over screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. 74 S&F 1500mm x 600mm bevellededge looking mirror of selected quality with 4.5mm thick polished glass, mounted on 6mm thick AC building board of commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repairs complete all as specified and directed. 75 S&F fancy type, chromium plated, bib tap,cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed. 76 S&F CP swan neck type pillar taps fancy type 15mm bore cast alloy with capasten head screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and flynuts screwed complete all as specified and directed. 77 S&F CP jet spray hygenic spray set for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed. 78 S&F 15mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. 79 S&F 15mm bore fancy type chromium plated stop valve/angle cock (concealed type) with long shank and cup cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. 80 S&F 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 81 S&F swivel shower along with shower arm 15mmsize 195mm long with bend of 45 degree with flange of PTMT any colour for fixing with 15mmdia pipe (Min weight 40 gms) complete all as specified and directed. 82 Taking up or down 15mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 83 Taking up or down 20mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 84 Taking up or down 25mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 85 S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. 86 S&F steel water tubing, 20 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. 87 S&F steel water tubing, 25 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. 88 Cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing,steps, cills, sunshades, shelves,lintels,etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting exc. 10cm but not exc 20cm girth complete all as specified and directed. 89 M&L prelaminated particle board of thickness 18/19mm, interior grade, prelaminated one side with decorative choice lamination & other side balancing with lamination, fixed with screws to timber frame work complete all as specified and directed. 90 S&F wooden lipping complete all as specified and directed. 91 S&F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 40mm (when open),complete all as specified and directed. 92 S&F rolled mild steel sections like angle, channel, flat etc as inframed work such as grills, gratings,etc,with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framed work of water tanks and similar work confirming toFe-290Gde E-165 complete all as specified & directed by Engineer-in-charge. 93 Excavation in post holes (or similar holes) in any type of soil each n exc 0.50 cu.m,getting out,returning,filling on and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m in hard/dense soil and making good surface complete all as specified and directed. 94 M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 95 S&F PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, each opening n exc 1.50 mtr, contained with a pair of clamps and ap pair of side ornamental attachments complete all as specified & directed. 96 Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. 97 Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. 98 Taking down unserviceable Sheet metal box & MCB DB SPN with MCB"s of any make/capacity, complete, all as specified and directed by Engr-In-Charge. 99 Taking down unserviceable TPN DBwith MCB"s of any make/capacity, complete, all as specified and directed by Engr-In-Charge. 100 M&L, concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm dia confirming to IS 14930 (Part-I) 2001,with all fitting and fixing accessories and1.5 Sqmm FRLSHPVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etccomplete for the following:- NOTE:- All point wiring considered for high buildings. Bidders must visit in work side before quoting the rates 101 One light point controlled by one switch. 102 One Ceiling fan point controlled by one switch. 103 One Exhaust fan/ wall mounted fan point controlled by one switch. 104 One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. 105 One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. 106 Description all as per item No 100 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. 107 S&F switch piano, PVC/Polycarbonate, flush button single pole one way 5 Amp complete all as specified and directed. 108 S&F socket out let, multipurpose, PVC/Polycarbonate, 2 in 1 5 pin, 5 Amp complete all as specified and directed. 109 S&F switch piano, PVC/Polycarbonate, flush button single pole one way 15 Amp complete all as specified and directed. 110 S&F socket out let multipurpose PVC/Polycarbonate, flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed. 111 S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed. 112 S&F ceiling rose, PVC/Polycarbonate,surface bakelite 63.5 mm dia three terminal complete all as specified and directed. 113 S&FLamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete. 114 S&F LED Bulb09/10 watt with provision of fixed in Lamp holder complete. 115 S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 116 S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. 117 S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqdlength of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. 118 S&F in repair / replacement of old unsv LED luminaire 600 mm x 600 mm 36 watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceilingincluing connecting upto drive with reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection to connector of LED fitting including testing on completion & Taking down old unsv fittings all as specified and directed. 119 Supply & fixExhaust fans made of sturdy Engineering plastic complete with louvers shutter, 230 Volt, 50 Hz, RPM 1200, copper winding of sweep 300 mm, incl all fixing accessories required including making hole & regd length of 3 core 1.0 sqmm PVC multistranded copper conductor,and testing complete all as specified and directed. 120 Supply & fixBEE 5 star rating energy efficient ceiling fans 1200 mm sweep (BLDC) with minimum air delivery 210 cum/min, down rod all accessories required including regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, PVC connector for proper hanging of fan and testing complete all as specified and directed. 121 Supply & fixing water heater storage type metallic outer body and stainless steel inner container, 50 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheated, three pin plug top complete with necessary fittings and fixtures all as specified and directed. 122 S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KAcomplete all as specified and directed. 123 M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia confirming to IS 14930 (Part-I) 2001, with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSHcopper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.(NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. 124 S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB"s are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making goodthe distributed wall surfaces to match with existing specification including taking down all as directedby Engr-in-Charge at site. 125 S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. 126 S&F, MCB SPN 63 Amps, 240 volts "C" series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. 127 S&F, MCB SP 240 volts, 6to 40 Amps, "C" series 10 KA including connection with suitable size copper lugs.complete all as specified and directed. 128 S&F, MCB SP 240 volts, 63 Amps, "C" series 10 KA including connection with suitable size copper lugs.complete all as specified and directed. 129 Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area 35 Sqmm 3.5 Core complete all as specified and directed. 130 Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete. 131 Bricks, old size sub class `B" laid in trenches with width wise along the alignment of the cable as protection complete. 132 S&F tube "Light" grade galvanised Pipe of 50 mm dia with all fittingfor cable protection, laid in trenches, fixed to wall and floor by MS shaddle & fixed with pole, 02 position by MS clamp made of 40x5 mm MS flat, complete all as specified and directed. 133 Excavation in trenches n exc. 1.5 m wide and n" exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. 134 Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed. 135 Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete. 136 M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded BTstone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in "D" shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.
|
