Bids Are Invited For Hiring A Company For The Acquisition Of Peristaltic Bombs For The Luiz De Queiroz, Anhu ... in Brazil

Work Detail

Apex 20 Motobomba Set Personaltic Motobomba For Use In Dosage Of Hydrated Cal And Carrious Solution With The Following Characteristics: With Positive Displacement; Project Flow: 50 To 400 L / H; Manometric Pressure: 8, 0 Bar; 0, 182 Liters/Revolution; 57 Nm Starting Torque; Reversible And Self -Removal; Helicoidal Motorbidding; Three -Phase Induction Engine; Rotation: 46 Rpm In Its Maximum Flow At A Frequency Of 60 Hz; Engine Power: 0, 37Kw With Forced Ventilation To The Motorductors Assembly; Maximum And Minimum Lubricant Level On The Lower Lid Of The Carcass; The Anticipated Compression System For The Hoses Should Be Performed By Stubs Of The Rotor Built Of Cast Iron Astm A48 Class 25. The Pump Rotor Shall Have Independent Bearings With Lubricated Bearing Sets, Not Being Acceptable Pump Of The Monobloc. The Bearings Should Be Supported By A Box And Sealed With A Dynamic Buna-N Seal. The Rotor Should Connect To The Reducer By Striated Axis For Axial And Radial Load Distribution. The Coupling Between Engine And Pump Should Be Straightforward. Hose With Material Compatible With The Fluid To Be Pumped, The External Surface Of The Hose Should Be Uniform (Machined) With A Maximum Tolerance Of 0, 2 Mm. To Ensure Total Refund Of The Hose, It Must Have Four Layers Of Nylon, And 8, 5 Mm Wall Thickness. Mangote Fixation Should Be Through Bolt -Ups, With High Radial And Axial Tolencia That Allows Axial Loading And Radial Compressive Effort Dispersion Without The Elastic Deformation Of The Cl It Should Enable Dosages With A Minimum Accuracy Of 99, 0 %;, Apex 28 Peristaltic Motobomba Set With Copulated Motorductor And Hose Sanitary Lubricant Hose For Pac Dosage, With The Following Characteristics: Project Flow: 50 To 500 L/H Manometric Pressure: 8 Bar Suction Bocal 1 Ans B16, 5/150Psi Recalque Bocal: Flanged Dn 1 Ansi B16, 5/ 150Psi Pump Construction Materials Carcass: Molten Aluminum Under Rotor: Molten Aluminum Lid: Molten Aluminum Under Pressure With Maximum And Minimum Level Indication (No Stresses) Hose: Epdm With Uniform Outdoor Surface And Two Layers Of Nylon Reinforcement, With An Internal Diameter Of 28 Mm Inserts: Pp Electric Motor Features Power: 1, 0 Hp (0, 75 Kw) Rotation: 23 Rpm (4 Poles) Type: Fully Closed With Forced Ventilation Protection: Ip55 (Nbr 7094) Voltage: 220/380 Or 440V Three -Phase Frequency: 60 Hz Isolation: Class F Carbon Steel Metal Accessories With Anticorrosive Coating Each Motobomba Set 02 (Two) Pieces: Epdm Hose W/ Uniform Outdoor Surface And Two Layers Of Nylon Reinforcement, With An Internal Diameter Of 28 Mm Observation The Hose Should Operate Immersa In A 100% Time Glycerol Sanitary Lubricant. The Rotor Must Have Its Own Bearings And Bearings. The Planned Compression System For The Hoses Shall Be Made Through The Stresses Of The Molten Aluminum Rotor. Must Have Minimum And Maximum Level Indication Of The Sanitary Lubricant. Pump Painting In Epoxy. The Peristaltic Pump Should Allow Dosages At Least 99, 0 %.

Contact Information