Bids Are Invited For Purchase Of Various Materials in Brazil

Work Detail

Galvanized Wire N. 12 (Kg) The Material Used For The Wire Galvanizaphic 12, And The Carbon Stem. The Galvanized Wire Should Go Through A Galvanization Process, Which Is Existing Greater Resistance And Durability For The Thermal, This Process Is Responsible For Protected Metal Against Rust And Corrosion., Wire Galv. N. 16 (Kg) The Material Used For The Galvanizated 16 Wire, Appelled Wire (Kg) The Recipined Wire Should Be Done With A Carbon Pionery. It Should Be Produced From Agreed To Standard Nbr 5589/82., Fine Sand M3 Should Have Smaller Grains, With Grammation Between0, 05 And 0, 42 Mm. This Characteristic Makes It Ideal For Steps Such As Plaster, Since It Offers A Thinner And Smoother Aspect, Essential For Later Mass And Painting, Ensuring Quality In Its Mortar, Internal Coatings And Exterior, And Regularization In Its Renovation Or Construction. This Paraconstruction Sand Is Used Only To Make Concrete Econtra Floor, Precisely Because Of The Moreustic Aspect And The Smallest Refinement That Has The Others. It Should Be Produced Of Hot Lamination, Obeying The Most Rigorous Quality Of Quality, With The Specifies Of Abnt Nbr 7480.This A-Co Vergalhao Has To Have Inmetro Certification, Ensuring The Quality And Resistance That The Work Needs. It Should Be Ca50. And A Ribbed Super-Tissue Bar, Should Be Produced In A Hot Delamination Process By Obeying The Richer Quality Standards, With The Specifications Danormal Abnt Nbr 7480.This Care Vergalha It Must Be Ca-60. And A Ribbed Super-Tissue Bar, Should Be Produced In The Process Of Hot Lamination By Obeying The Moreirigorous Quality Standards, Ceramic Block 8 The Ceramic Block Must Come In Full Without Imperfections That Hinder The Execution Of The Service. Their Production Should Be Done Ecologically Correct For Not Generating Toxic Residues., Hydrated Lime Ch Iii 20 Kg Hydrated Lime Ch Iii Must Meet The Technique Of Abnt Nbr 7175. Chii-Hydrated Cal Should Not Require Hydra-Tatal Or Rest Time, And Should Not Be Used And Should Not Offer The Risks Of Calvir. Serrote Should Have Spoiled Lamina. The Ca-Va Should Be Ergonomic Wood And Varnished Rigid Plastic Absproked With Terra-Moplastic Rubber. Tools Must Be Subjected To Practical Application Attestes To Ensure Their Mechanical Re-System In Intense Use. A Layer Of Varnish Or Anti-Corrosi-Va Painting Should Be Applied To The Blades To Ensure A Larger Life Of The Tool., Carriola The Hand Cart Should Be Reinforced By Carbon Deco, With A Minimum Capacity Of 60 Liters. It Should Be Finished With Painting To Ensure Pro-Oxidation, With Tire And Air Chamber. The Cavadeira Should Be Seasoned In All The Body Of The Sake, To Provide Greater Resistance And Less Wear During Use. It Should Receive Painting To Ensure Protection Against Oxidation-Cao. The Cable Should Be Of Wood With Colorless Piercing Finish.

Contact Information