|
Appointment. Provides High -Quality Opening Of Productive Layers, Provides A Lubricant And Anti -Corrosion Effect On A Drilling Tool; Cools And Lubricates The Chisel; Prevents The Possibility Of Complications During Drilling (Differential) Grabbing, Absorption, Oil And Gas, Etc. 3. Technical Characteristics: - Density: * In Oil-Based Solutions-890-980 Kg/M3 * In Small Solutions-1050-1060 Kg/M3 * In Weighted Drilling Solutions - 2200 Kg/M3 Or More - The Content Of Barium Sulfate- 80-90% - Pirite Content - Less Than 6% - The Content Of Water-Soluble Salts- 0.35-0.45% - The Share Of The Fraction Of 5 Μm - 10-20% - Humidity Up To 2%, Bullet Tap Universal Mbu 74-120, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipples. Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipple. Internal Size 50 Mm/Nar 73 Steel, Spindle Rotator 2D 146000, Size 85 Mm, Length Up To 100 Cm, Cuff Stem Piston 11Gri, 04-004 Rubber, The Remote Cylinder Set Of Lifting The Mast, Assembled Urb-2A-2, Breeded Drill Pipes (Ubt) Are Designed To Increase The Stiffness And Increase The Mass Of The Lower Part Of The Drill Column, Through Which The Load On The Loot Is Created. Scroll 146 Mm, Length 4 M, Thread 117 Mm, Piston Rod Nb 32-02-501, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipple. Internal Size 66 Mm/Bun 117 Steel, In The Molecule Of The Tsitter-Ion Polymer Coagulant Fa367, A Linear Macromolecule Of A Polymer Of A Cationic Group, A White Or Gray-Yellow Powder. It Is Mainly Used To Inhibit The Detritus Dispersion And Increase The Viscosity Of The Drilling Fluid, Has A Sufficiently Strong Ability To Suppress Enveloping, In This Regard, It Has Strong Properties Of Contamination Resistance, Is Easily Cleaned Of Stone Flour, Can Reduce The Content Of Submicrons In The System, Increase The Rate Of Drilling And Protect The Fertile Layer. Often Used In Combination With Lower Viscosity Of A New Type Of Xy-27, Can Significantly Reduce The Cost Of Drilling Fluid, Increase The Overall Economic Benefit., Bullet Tap Universal Mbu 32-73, Translators For Drill Columns Are Designed To Connect Parts Of The Drill Column And Attach The Tools Used For Drilling Wells To It. Translators For Drill Columns Are Made The Following Types: P - Transitional; M - Coupl; N - Nipples. Interior Size 86 Mm/Nar 117 Steel, Wa-C-C Short, But A Simple But Very Effective And Extremely Necessary Auxiliary Manual Mechanical Tool Used During Drilling Of Gas Or Oil Wells When Installing Or Dismantling The Pipe. The Wa-C Series Model Is Directly Used To Work With Pipes From 3 1/2 To 15 5/8 Inches, That Is, 88.9 ... 396.9 Mm., The Hydraulic Cylinder Of Lifting The Rotator 2-25-10-1 To Urb-2A-2, Article Mz -73.000, Pipe Diameter, Mm - 89, Length, Mm - 535, Mass, Kg - 8.7, Cuffs 85-95-6 Ush Nbr Rubber
|
