Tender For Construction Of Co Office Mount Abu At Abu Road District Sirohi - Part A Civilwork Earth Work In ... in India

Work Detail

Tender For Construction Of Co Office Mount Abu At Abu Road District Sirohi - Part "A" CIVILWORK Earth work in excavation in foundation trenches or drains including dressing of sides and ramming or bottoms lift up to 1.5 m including taking out the excavated soil as and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr.,All kinds of soil 2 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :Hard Rock Balsting Probihited 3 Filing available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consoliding each deposited layer by ramming each deposited including layer by ramming and watering including lead upto 50Mtr 4 P/L in position cement concrete including curing compacation etc. complete in specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) 5 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. 6 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : :Columns, pillars, posts and struts etc. 7 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : :Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks,sills,chhajjas,lintel, beam etc. 8 Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix / Design Mix 9 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement :1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominalmix ( withgraded stone aggregate20mmnominal Size) 10 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcementfor :-Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases M20 grade Nominal Mix 11 R.R. stone masonary in foundation and plinth in cement sand mortar 1:6 (1 cement : 6 sand) for above 30 cm. thick walls, 12 Providing and fabricating reinforcement for R.C.C.work including straightening , cutting , bending,placing in position and binding (including cost of binding wire ) all complete up to floor three level Hot rolled deformed bers (IS :1139 13 Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layer not exceeding 20 cm. In depth, consolidation each deposited layer by ramming and watering including lead up to 50 meter and lift up to 1.5 meter. (B - 1.30 ) 14 Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingles sand. (B- 1.33 ) 15 Random RubbleStone Kharanja under Floor 16 Brick masonary in super structure up to third storey bricks of class designation 75 in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) add extra over item 5.10 & Add extra over all type of bricks for using clay fly ash bricks 17 Half Brick masonary in foundation and plinthUsing bricks of designation 75 cement mortar 1:4 (1cement : 4couarse sand) 18 Add extra over item for half brick masonry in super structure upto third story including cost of norminal hoop einforcement (2 Nos. ,6mm Ø M.S. barat every fourth course) . 19 P&F Vitrified Porcelain Polished tiles and approved size (600mmX600mm) as pattern (Naveen/Bell/Johnson/Kajariya) 10mm thick on floor skirting and steps etc. laid with tile admixture (Roof Pidilite of equivalent) including joints to be filled with tile grout to 20 Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 withmachine cut edges : Kota stone 25 to 30mm thick. 21 Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:2:4 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification. 22 Add Extra for doing mirror polishing 23 Grading roof water proofing treatment with :Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). 24 P&L glazded tiles pieces for roof treatment having colour and shade as approved by the engineer in charge over 20mm thick under layer of cement mortar mix 1:4 with application of cement slurry incl. finishing of joints with white cement and pigment matching the shade curing etc. complete in all respect. 25 Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge :Pofile B 26 .Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure "A" : 8.18.1 25 35 mm thick Decorative teak veneer both side 35 mm thick Decorative teak veneer both side 27 Add extra for Flush doorsFor Internal teak wood lipping in 25mm depth in single leaf. 28 Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred weldedand grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C Cblock 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to framefor paitam fixing float glass 4mm thickpanes with glazing clips and metal sash putty andfixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –chargeWindow openable. 29 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 30 6 mm cement plaster to ceiling of mix 1:3 ( 1 cement : 3 fine sand) 31 Plaster on new surface on walls in cement sand mortae 1:6 including racking of joints etc. complete fine finish: 20mm thick. 32 Plaster on new surface on walls in cement sand mortae 1:6 including racking of joints etc. complete fine finish: 25mm thick. 33 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS : 13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar)Category-A : Kajaria, Jhonson, , Somani make 34 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13753 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4)Category-A : Kajaria, Jhonson, Somani make 35 Providing batta (gola) 75mmx75mm in cement (1:2:4) including finishing with cement mortar 1:3 as per standared design. 36 Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). With 75mm opening when closed 37 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 38 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: New work (three or more coats ) New work (three or more coats ) 39 Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide 40 Add extra over above Item for fixing hand railing in lead (weight of lead to be paid). 41 Painting with enamel paint of approved brand and manufacture to give an even shade. Two or more coat on new work 42 Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit. MS Sheet 18 SWG 43 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).Grade 304 44 Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete :50 mm thick with 20 mm thick nominal size aggregate. 45 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm Dia. 46 Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of:Jhunjhunu / Jalore (Red / Choclate Colour)1501 to 3600 Cm2 47 Extra for providing edge moulding to18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-ChargeGranite work.. 48 Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately).For fixed portionPowder coating aluminum( minimum thickness of powder coating 50 micron) 49 For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Powder coating aluminum( minimum thickness of powder coating 50 micron) 50 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.)With float glass panes of 8 mm thickness 51 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate 52 Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.Polyester Powder coating aluminum( minimum thickness of powder coating 50 micron) 53 Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 54 Providing and fixing steel gate grating and grills made of angles,tees,square bars or other flats black pipe with holdfast and fittings complete per design and drawing including cutting welding and fabrication with priming coat of red oxide. 55 Providing & laying Chequerred terrazzo tiles of approved make 22 mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28 mm thick bed of C.M. 1:4Dark shade using ordinary cement. 56 Demolishing of R.C.C. work including stacking of steel bars and disposal of unserviceab le material within 50 meters lead. 57 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. Cement Mortar. 58 Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.Cement Mortar. 59 Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material with in 50 Mtr. lead for :Stone slab roofing complete with lime dhar and kharanja. 60 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead 61 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 25mm to 40mm. 62 Sanitary Work P&F Indian type white glazed vitreous china 1st quality W.C. Orissa pan( IS. 2556 Mark) with 100 mm vitreous china Por S trap including cutting and making the wall and floor. Size 580mmx440 mm 63 P & F Europeantype white glazed vitreous china 1st quality W.C. (IS : 2556 Mark) including cutting and making good the wall and floor Wall Mounting (syphonic) 64 P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked)White 65 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:WVC for symphonic EWC. 66 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 550 mm x 400 mm dia for counter top 67 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (large) or half stall size 590x375x390mm. 68 P&FC.P.brassUrinalFlushPipeset complete with flanged brackets of approved make.For 3 Urinal 69 P & F C.P. brass Urinal Spreader for stall urinal of approved make. 70 P & F Marble. Urinal Partition slab both sides polised of approved design cut from marble size 900X600mm. Makrana "Albeta" marble having light spreaks 71 P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :1.0 mm thick Salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel – kanth, Jaina, Faber-Castell )with large waste coupling. 37x18x7…bowl size(17x15x7(with drain board) 72 P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. 73 P & F Grating of approved quality/make: 74 Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make 75 P & F Shower arm 15mm dia of approved quality/make. 76 (-do-) size 370mm.(-do-) 77 P & F Bath Shower of approved quality/make. 78 C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm. 79 P & F Extension Pipe for bib cocks of approved quality/make. 80 (-do-) 150 X 15mm. 81 P& F Sink Cock of superior quality and approved make : CP Sink Cock, Casted spout 15mm 82 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 83 Providing & fixing C.P.flange for 15mm dia taps. 84 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore. 85 (-do-) Long body, 15mm nominal bore weight not less than 690 gm 86 P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make: 87 (-do-) Concealed Stop Cock 15mm. 88 P&F Ball Cock (IS-1703) with rod & PVC ball complete Brass wt.Not less than 400 gm, 20mm 89 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. with 37 Cm. long pipe and nut. 90 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : 91 Gun-metal 15mm nominal bore. 92 (-do-) 25mm nominal bore. 93 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1,000 litres capacity. 94 Hoisting charges for each floor 95 P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.Trap size 225 X 150 mm, 15 Kg. C.I. cover with frame Internal Chamber size 450 X 450mm. 96 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant 97 110 mm dia 98 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 99 Bend 87.5 Dg. 100 110mm dia 101 Coupler (socket) 102 110mm dia 103 Pipe Clip 104 110mm dia 105 Plain Tee 106 110mm dia 107 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 108 75 mm dia 109 110 mm dia 110 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 111 Coupler 112 75mm dia 113 110mm dia 114 Bend 87.5 Dg. 115 75mm dia 116 110mm dia 117 Single "Y" 118 75mm dia 119 110mm dia 120 Door Bend 87.5 Dg. 121 110mm dia 122 Single Tee with Door 123 110mm dia 124 Single Tee 125 75mm dia 126 110mm dia 127 Nahni Trap without Jali 4” 128 110mm dia 129 Plain floor trap 130 110mm dia 131 Vent Cowel 132 110mm dia 133 Construction of manhole in all type of soil inner size 90 X 60 Cm. 450 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, 25 k.g C.I. cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M 134 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 100 mm thick C.C. 1:5:10 in foundation, 20mm thick inside plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. size 450 x 450mm depth upto0.5 M & 15 k.g. C.I.cover with frame 135 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia 25 k.g.each Ferro C.I. cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 400x140x150cm (for 50users) 136 Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :Size 300 Cm. dia outside & 300 Cm. depth. 137 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 138 15mm dia nominal bore "B" Class 139 25mm dia nominal bore"B" Class 140 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:Exposed on wall 141 15 mm dia nominal bore"B" Class 142 25mm dia nominal bore"B" Class 143 Concealed pipe in wall including painting with anticorrosive bitumen paint 15 mm dia nominal boreB class 144 P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore 145 P & F Towel Rail or Ring of approved quality/make:C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). 146 Construction of open surface drain with 112 mm thick brick masonry in cement mortar 1:4, 110 mm thick base concrete 1:5:10, 37mm thick M-15 Concrete, 12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation and disposal of earth complete as per approved design/drawing (150mm drain 225mm avg depth 147 Providing Laying & jointing glazed S.W. pipes grade `AA` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1.1 excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. 150mm dia 148 Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications (Width W=Dia of pipe in Cm+40Cm.) concrete width to be reduced from width W at center of pipe to "0" at top of pipe (Excluding cost of pipe). 150mm dia S.W. Pipe. 149 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & it"s accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories) 150 Short point (up to 3 mtr.) 151 Medium point (up to 6 mtr.) 152 Long point(up to 10 mtr..) 153 Wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it"s accessories, round tles,18 SWG M.S. box with earth terminal, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories) 154 Long point(up to 10 mtr..) 155 Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it"s accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal,6 Aswitch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. GP1 ( use semi moduler accessories) 156 On board 157 Short point (up to 3 mtr.) 158 Medium point (up to 6 mtr.) 159 Long point(up to 10 mtr..) 160 Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet, making connection , testing , etc. as required. GP1 ( use semi moduler accessories) 161 In Item no. E020100, E020200, E020300 The rates are for flush type PC / Urea series accessories ,for using semi modular PC / Urea series accessories, rate shall be increased 2 % in point wiring rate( For item no. 1 to 4 Total cost Rs. 148926.00X @2%=2978.52) 162 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required.Gr I 163 20 mm 164 25 mm 165 32 mm 166 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.Gr I 167 3x 1.5 sq.mm 168 2 x 2.5 sq. mm. + 1x1.5sqmm ( All light and power Ckt) 169 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (AC Ckt) 170 4 x 6.0 sq.mm (Sub main) 171 1 x 4.0 sq.mm (With sub main ) 172 P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.Gr I 173 Single pole MCB 174 6 A to 32 A rating 175 Double pole MCB ( for UPS and AC Point ) 176 6 A to 32 A rating 177 Four pole MCB 178 40 A 63 A rating 179 Triple pole MCB 180 40 A 63 A rating 181 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.Gr I 182 Double door (single phase) 183 4 Way 184 Double door (Three phase) 185 6 Way 186 P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing ,phophatised ,powder painted complete with insulated suitable ratingcopper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. GP1 187 Double door with Provision of Incomer MCCB 100 / 125 A Rating 188 6 Way 189 P&F flush/surface type enclosure for housing MCB/Isolator with Din rail including making connectionswith lugs, repairs etc. as required. GP1 190 With sheet steel enclosure 191 Two way 192 P & F ISI marked following semi modular accessories with decorative cover plate of approved colours including making connections testing est." as required GP1 193 RJ-11 telephone jack single two line 194 RJ-45 computer jack with shutter 195 5 step fan regulator 196 T.V. socket single outlet 197 P & F following size hot dip galvanized M.S. box of 20 SWG with earthing terminal in recess/ surface suitable for modular accessories as required. GP1 198 1-2 Module 199 P & F following size mounting grid plates with cover plates GP1 200 1/2 Module 201 SITC of quick make and quick break3 pole current limiting MCCB having following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with frontface and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push( test) to trip, including making connections with lugs & spreaders,etc. as required. GP1 202 With Thermal Magnetic release 203 up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu 204 P/Laying P.V.C./ XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.Armoured 205 10.0 Sq.mm 206 4 core ( For Submersible pump) 207 25.0 Sq.mm 208 3.5 core ( For main line) 209 Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 210 4 x 10.0 sq.mm 211 3.5 x 25.0 sq.mm 212 P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make.Outer Dia. / Inner dia. 213 110 / 95 mm 214 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. G.I. "B" class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. 215 Maintenance free Gel EarthingwithPipe in pipe / Pipein striptechnologyfilled with anti corrosive conductive compound ( CPRI Tested )below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineralfillingcompound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone) and C.C.finished chamber covered with hinged type with locking arrangement C.I. Cover,C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes. 216 With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating 217 GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip 218 S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 219 25mm x 6mm G.I. ( Hot Dipped) Strip 220 8 SWG G.I. ( Hot Dipped) Wire 221 P&F 1200mm sweep BEE 5 star rated double ball bearing capacitor start, aluminium body & blade ceiling fan complying to IS 374:1979, I/p 50 watt at max speed & 230 Volt, air delivery>210 CMM, Speed> 330 RPM with down rod upto 30 cm with 3 x 1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required. 222 P & F 18 swgM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . 223 P&F of Double ball bearing, capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Gr I 224 300 mm sweep 225 P&F of Heavy duty capacitor start, Double ball bearing900/1400 RPM single phase ISI marked Exhaustfan,IS:2312 marked in existing opening including making connections testing etc. as required. GP1 226 300 mm sweep(900/1400 RPM) 227 Supply & FixingISI marked( IS : 15683 )Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, completein all respects includinginitial fill and wall suspension of following capacity.GP1 228 6 kg 229 P & F of IP 65 protected LED Street Light fixture 70-75 watt (with surge protection device 10KA) applicable for area lighting with extruded pressure diecast aluminium housing, system lumens efficancy of 100 Im/watt minimum, toughened glass with diffuser, suitable lenses on LED, 240V, 50 Hz of High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency>85% and in compliance to IEC standards system life of 50,000 Burning Hours, CRI>80, PF>0.90 at full load, CCT 5700-6500 K (as per direction of Engineer incharge). Fixtures shall be CE compliance. 230 S & F of Street light bracket made out from following size of " B "class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. 231 32 mm Dia. 232 Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required. GP 1 233 Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required GP 1 234 Supply & fixing of Faceplate for Flush / SurfaceMount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm GP 1 235 Single Aperture 236 P & F ISI marked gong bell including making connection testing etc. as required.GP1 237 P & F ISI marked flush/surface type buzzer including making connection testing etc. as required.GP1 238 P & F ISI marked single tone electronic call bell including making connection testing etc. as required.GP1 239 P & F ISI markedding dong/musical chime bell including making connection testing etc. as required.GP1 240 P & F IS:371 marked6 amp surface type ceiling rose including making connection testing etc. as required.GP1 241 P & F ISI marked6 amp bakelite batten/angle holder including making connection testing etc. as required.GP1 242 P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. GP1 243 4.0 Sq.mm 3 core flat / Round 244 Supply and fixing of Oil / Air break Starter panel made out of sheet steelpowder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFFpush buttons,ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors. GP1 245 For single phase Submersible / Monoblockpump 246 0.5 HP to 3.0 HP 247 P & F of 4 star ratedvertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloyconnection,testing etc. as required. GP1 248 25 Ltr. 249 P & F energy efficient/energy saving 9 watt IP 20 LED Bulb cool white, in existing holder/fixture as required, minimum 900 Lumen output, 25000 burning hours, CCT 5700 K or 6500 K (as per direction of Engineer incharge), ANSI Lamp efficacy minimum 100 lumen /Watt, CRI 80, Driver efficiency > 85%, PF 0.95 at full load/230 volt AC. 250 P & F of IP20 surface/recess mounted LED downlight made of pressure diecast aluminium housing, with heat sink and good quality reflector, high efficiency external driver, power consumption 14/15 watt, system lumen efficiency >80 lumen/watt, CCT 6000K (minimum) K, CRI>80, PF>0.9 life time 50,000 burning hours. 251 P&F of IP 20 LED tube light 20 watt external batten mode from CRCA sheet steel suitable to replace T-8/T-12 tube light, integral driver, 2000 luman + 5% tolerance system kuman efficiacy oh 100 Lm/watt minimum expected life time of 25000 burning hours, CCT 5700 K, ANSI, CRI 80, driver efficiency>85% , Life expectancy of driver min 30000 hrs. PF 0.95 at full load/230 volt AC. 252 P&F of 36 Watt IP 20 LED 2"x2" fixture, Recessed / surface type, having efficacy of not less than 100 lumen / watt, made out from CRCA housing and with high purity / transmisvity duffuser for uniform light distribution high efficiency driver electronics and in compliance to IEC standard (integral with light fisture), life time of more than 50000 burning hours, CCT 6000K (minimum), CRI>80 driver maintaining PF>0.9. 253 ROAD WORK. Earth work in excavation in foundation trenches or drains including dressing of sides and ramming or bottoms lift up to 1.5 m including taking out the excavated soil as and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 Mtr.,All kinds of soil(B - 1.8) 254 P/L in position cement concrete including curing compacation etc. complete in specified grade excluding the cost of centering and shuttering - All work upto plinth level. 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) 255 Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement @ 400 Kg per cum , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding25 mm, mixedina batching and mixing plant as per approved mix design,transportedtosite,laidwitha fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrance, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixturesasapproved,curing compound, finishing to lines and grades as per drawing complete as per MoRTH specification clause 602. 256 Providing and fixing of Precast concrete interlocking blocks ofmanufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS : 6717-2001. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lift, lifts & taxes general specifications of blocks. 100mm thick 257 Supply, Installation, Testing and comissioning of 16 Channel Digital Vedio recorder to support 16-ch 1080P video input w16 Channel Digital Video Recorder ith 2 slot for HDD. HDMI output, 1080P playback resolutions, bit rate 32 kbps-10Mbps, complete in all respect as per aboev specifications ( (DVR Approved Makes : Hikvision, Samsung, LG). NVR and Camera should be of the same make for smooth functioning. 258 SITC of 4 TB Surveillance HDD (Approved Makes: Seagate) 259 SITC of SMPS Power Supply required for the above 16 cameras (Standard make) 260 SITC of wiring for analoge camera video and power composite cable (3+1) 261 Supply, Installation, Testing and Commisioning of good quality of BNC connector, complete in all respect. 262 Supply, Installation, Testing and Commisioning of good quality of DC PIN connector, complete in all respect. 263 Supply of 19" (18.5”) Full HD LED / LCD Security Monitor, LED-Backlit TFT LCD technology with 1366×768 resolutions, Wide view angle: 90°(H)/65°(V), 3D comb filter, 3D De-interlace, 3D noise reduction, HDMI, VGA input, High reliable components for 7×24 working, Brightness: 200cd/m2 or better, Contrast: 600:1 or better, Color: 16.7m or better, VESA stand, power consumption not more than 25W, with HDMI Cable and mounting accessories Approved Makes: LG / SAMSUNG / HIKVISION / HONEYWELL

Contact Information