|
Lot 1 - Vortex Pv -Mesh T -Shirt, 67% Polyester And 33% Viscose, 180G/M², Moss 160, Round Collar With 2, 5 Cm Finished, Rectilinear, 100% Polyester Composition, Double -Type, According To Technical Design. The Sleeves Should Be Green Moss Pantone 160, On The Left Side Of The Chest Should Be Applied To High Resolution Embroidery With The Municipalitys Coat Of Arms, In Its Original Colors (According To Layout). The Inside Of The Collar Will Be Reinforced By A Seam Of 2 5 Mm Wide Range. The Body Bar And Sleeves Should Be Rebound With A Width Of 2, 0 Cm In 2 Needles. On The Inside Of The Collar Should Be Sewn From The Manufacturer., Lot 1 - Mange Long T -Shirt In Polyamide Fabric, 91% Polyamide Composition + 9% Elastane, With Fpu 50+ Sun Protection, In The Color Green Pantone 160. Round Collar With 2, With Application Of A Reflective Track In Neon Green. In The Body Of The Left -Side T -Shirt, The Municipalitys Coat Of Arms Should Be Applied To High -Resolution Embroidery, In Its Original Colors (According To Layout). A Reflective Range Of 5 Cm In Neon Green Should Be Applied Just Below The Municipalitys Coat Of Arms. The Inside Of The Collar Fired On The Gallon, 2 Needles 5 Mm Wide, The Body Bar Should Be Folded In The Galloner Two Needles With Width Of 2, 0 Cm. On The Inside Of The Collar Should Be Sewn From The Manufacturer., Lot 1 - Making Of T -Shirt Piquet P.A. 50% Pes And 50% Co, 184G/M², With Collar And 2 Buttons In The Bedroom According To Technical Drawing. The Sleeves Should Be Green Moss Pantone 160, In Their Original Colors (According To Layout). The Inner Part Of The Collar Should Be Reinforced By A Sewn Gallon Finish Of 2 10Mm Wide Strip. The Body Bar And Sleeves Should Be Folded With A Width Of 2, 0 Cm In 2 Needles Gallon, On The Inside Of The Collar Should Be Sewn From The Manufacturer. Have 4 Pockets, 2 Rear And 2 On The Front Of A Knife -Type Stoned, Waistband With A 4Cm Wide Half -Wide, With 7 Passenger Pants With Metal Button, Coarse Zipper In Jeans, Made With 3 To 4 Points Per Centimeters, Use In Finishing, Heavy Machine, Interlock, Conpedited With A Current Sponneum, Finishing. Traveted (Passing, Pocket And View) Line To Be Used In The 50 And 80 Pes 100% (According To Layout). Inner Part Should Be Sewn From The Manufacturer., Lot 1 - Making Of Shirt In Unioficce P.A. 38% Pes And 62% Co, 163G/M², In Blue, Long Sleeve, According To Technical Design. On The Left Side Of The Chest Should Be Applied To High -Resolution Embroidery With The Citys Coat Of Arms, In Its Original Colors (According To Layout). The Sleeves Should Be Folded With A Width Of 0, 8 Cm In A Machine Conveyor Point Of 2 Needles, Lot 1 - Coat Making In Oxford 100% Pes Fabric, In Special White Color, In Its Original Colors (According To Layout). Inside The Collar Should Be Sewn From The Manufacturer., Lot 1 - Making Of Female Label In Gabardine Fabric, 100% Polyester Composition, 140/152 G/M2, Standard Model, White Mango V, With 4 Bot.
|
