|
Tender For Development Work Of Sautle Talab In Nagar Panchayat Ikouna - Providing of 32HP diesel pump for dewatering of pond with 2 pump, driver etc. all complete (for 8 hours) (NP Approved) 2 Removal of sludge, kanker, brick bats, organic or inrorganic material in faul position or in liquid mud including lead 30m and 3.00 meter lift with specials T & P labour etc. all complete. (SOR-252) 3 Earth work in excavation in cutting & embankment in ordinary soil with manual labour/ machine and shifting of excavated soil wuth tractor trolly for 0-1.5m depth. (SOR.-251) 4 Earth work in excavation in cutting & embankment in ordinary soil with manual labour/ machine and shifting of excavated soil wuth tractor trolly for 1.5-3.0m depth. (S.I. no.-251+254) 5 Earth work in excavation in cutting & embankment in ordinary soil with manual labour/ machine and shifting of excavated soil wuth tractor trolly for 3.0-4.5m depth. (SOR.-251+254+254) 6 Cartage of earth and malva up to 8km distance including loading & unloading all complete (SOR- 231 A) 7 Extra for compaction of earthwork in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density) SOR- MORT & H 305 (3.19) 8 Providing and Laying cement concrete in 1:4:8 (1 Cement : 4 Course sand : 8 graded stone aggegate 40mm of nominal size) and curing complete DSR-4.1.8 9 Brick work in Masonary with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plith in 1:4 Cement & Course sand mortar D.S.R.- 6.1.1. 10 12mm Plastering on brick work with cement mortar in 1:4 Cement and Course sand. D.S.R.- 13.4.1 11 Dismantaling of following road surfaces (CC Road and old structure (SOR-17.2.2) 12 Earth work in excavation including disposal of excavated earth, lead upto 30mt. and lift mentioned below. (SOR-251) 13 Providing & laying in position cement concrete in 1:4:8 with cement, course sand and 40mm. graded STONE ballast in all footing and trenches including supply of materials and labour T&P etc. complete (SOR-275) 14 R.C.C work with cement, course sand and 20mm gauge stone grit in proportion of 1:1.5:3 in slabs excluding of supply of reinforcement & its Bending but including its fixing, binding wire and supply of all materials, labour T&P (DSR-5.1.2.) 15 Mild steel or iron work in R.C.C work in drain including cutting and bending of the same for proper completion of work. (DSR-5.22.1.) 16 Earth work in excavation in trenches for foundations and pipes cables etc. in ordinary soil(loan clay and sand) including lift upto 1.5m and dressing of sides and ramming of bottom snad disposal od surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. (PWD-251) 17 Providing and Laying in cement concrete 1:4:8 (1 cement : 4 fine sand : 8 graded stone ballast 40mm nominal size) and curing complete, including cost of form-work in foundation and floors. (PWD-281) 18 R.C.C. work with cement approved course sand and 20mm gauge approved stone ballast in the proportion of 1:1.5:3 (M-20) in beams excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire including necessary centering and shuttering etc. and also including supply of all materials, labours and tools and plants etc., required for proper completion of the works, binding wire cost being included Grade Beam 19 As in item 3 above but in R.C.C. columns in 1:1.5:3 having strenth not less than M150 SOR289 20 As in item 3 above but in R.C.C. Footing foundation and footing with approved stone ballast. (using 1:1.5:3 mix concrete) 283A 21 Boring providing & installing cast-in-situ single under reamed pile of specified dia and length below pile cap in cement concrete with mix M-25 of 20mm nominal size of grit to size to carry a safe working load not less than specified excluding the cost of steel reinforcement but including boring with pentonide solution and length of pile to embedded in the pile cap 300mm dia piles DSR 22 Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (PWD-504) 23 Earth work in cutting or in embankment in regular soil excavation to be the form of regular pits not exceeding 1/2 meter (20") in depth and earth work in embankment to be in 20cm (8") layers, including ramming and dressing the surface too required levels and slopes and also including 1.5cm (5") lift and 30m (100") lead. The earth form cutting to be used in making embankment or to be deposited as spoil banks with in 30m (100") distance as directed by the Engineer i/c with in a lead of 50m. (PWD-251) 24 Earth work in filling the Carted Earth of 10.0km as per S.I. No. 253+231(A) 25 Boring providing & installing cast-in-situ single under reamed pile of specified dia and length below pile cap in cement concrete with mix M-25 of 20mm nominal size of grit to size to carry a safe working load not less than specified excluding the cost of steel reinforcement but including boring with pentonide solution and length of pile to embedded in the pile cap 300mm dia piles DSR 26 R.C.C. work in R.C.C. Footing foundation with cement approved course sand and 20mm gauge approved stone ballast in the proportion of 1:1.5:3 (M-20) in beams excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire including necessary centering and shuttering etc. and also including supply of all materials, labours and tools and plants etc., required for proper completion of the works, binding wire cost being included. 283 A 27 Concrete with 40mm gauge approved stone ballast, sand of 1.25 fineness modulus in 8:4:1 in foundation including supply of all materials labour and tools and plants etc. required for proper completion of work 28 R.C.C. work with cement, approved course sand and 2cm gauge approved stone grit (Dala) ballast in the proportion 1:1.5:3 in R.C.C. Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper completion of work. 29 Mild steel or Iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including westage bend, hook and authorised over lapping shall be measured. 30 Chequered terrazo tiles 22mm thick with graded marble chips of size up to 6mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20mm thick bed of cement mortar 1:4 (1cement :4course sand) Dark shade pigment used for work. 31 Running of 5 h.p pump for Dewatering of Pond side retaining wall foundation water including making all arrangement of pump section and delivery pipes and other accessories at site including cost 32 Installation & Comissioning of Solar Module, 110wp module *4 LED Lights, 18 watt *4 Batterys 50AH *4 (Lithium Ferro Phosphate) Poles 7 meter high 33 Providing and stacking of Ficus Bengalensis (Bargad) of height 120- 135cm in big poly bags of size 25 cm as per direction of the ofiicer-in-charge. 34 Providing and stacking of Azadirachta Indica (Neem) of height 120- 130cm in big poly bags of size 25 cm as per direction of the ofiicer-in-charge. 35 Providing and stacking of Ficus Religiosa (Peepal) of height 150- 150cm in big poly bags of size 30 cm as per direction of the ofiicer-in-charge. 36 Providing and Stacking of Bottle Palm of ht. 270-300 cm bottle palm girth 40-50 cm well developed in big HDPE bags as per direction of the office-in-charge 37 Providing and Stacking of Phoenix Sylvestric Roxb. ( Wild date palm/khajur) of height 150-165 cm. in big HDPE Bag as per direction of the office-in-charge. 38 Providing and Stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the office-in-charge 39 Providing and Stacking of Washingtonia Filifea palm stem of height 120-150 cm. with 8-10 healthy leaves lush green leaves well developed in big size HDPE bags as per direction of the office-in-charge 40 Providing and Stacking of Calliandra Hybrida of height 105-120 cm. well branches, bushy in big size HDPE bags as per direction of the office-in-charge 41 Providing and Stacking of Dombeya mastersii of height 60-75 cm. with 4-5 branches in big size HDPE bags as per direction of the office-in-charge 42 Providing and Stacking of Ficus blackii (F. vivion) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the office-in-charge 43 Providing and Stacking of Ficus Panda of height 90-105 cm. with 8-10 branches and healthy foliage, bushy in big size HDPE bags as per direction of the office-in-charge 44 Providing and Stacking of Hibiscus variegated of height 60-75 cm. with 8-10 branches and healthy variegated foliage in cement pots of size 35cm as per direction of the office-in-charge 45 Providing and Stacking of Thuja compacta of height 75-90 cm. conical shaped well formed with healthy foliage in earthen pots of size 30cm as per direction of the office-in-charge 46 Providing and Stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm in 20 cm size of earthen pots/plastic pots & as per direction of the office-in-charge. 47 Providing and Stacking of Clerodendrum thomsoniae of height 30 cm to 45 cm in 20 cm size of poly bag & as per direction of the office-in-charge 48 Supply and fixing of precast RCC fencing post 9 feet long 49 Supply of Galvanized iron Barbed Fencing Wire, 6mm 50 Fixing of Galvanized iron Barbed Fencing Wire, 6mm in 7 rows and in cross 51 Fabrication and fixing of MS Grill made with 40X40X6mm MS Angle, 12X12mm square bar and 30mm X6mm MS Flat around the Pond and front boundary for safety purpose including Supply of all material, labour and T&P etc. 52 Painting or varnishing on new iron work in small areas with two coat priming & two coat paint or varnish 53 Supplying and Installing of MS Bench 54 Installation of UNOLEX AQUA Semi-Automatic Grade surface Floating Aerator, Motor speed 1440 rpm and 10hp power, Oxygen transfer capacity 1.5kg/HP/Hr, used for water and waste water treatment supply and disposal system.
|
