|
Construction Of Public Parks At Various Places In District Kargil ( Balance Work Sitc Of Gym Equipments) Under The Scheme- State Sector-Air walker : Providing and fixing air walker with below Specification:1. Dimensions (LxWxH): 1100x550x1480mm2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make .3. ‘U’ shaped main frame of NB 65mm (G.I) ‘C’ class pipe .4. All other pipes of NB 32mm (G.I) ‘C’ class (‘NB’ stands for nominal bore i.e , internal diameter pipe in millimeters)5. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints .6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs .7. Zinc primer paint is applied at all the welding points prior to finishing .8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.9. Foothold made of nylon alloy with rounded edges to prevent impact and injury .10. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .11. The equipment are fitted with inbuilt limiters to prevent unwanted movements .12. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .13. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .14. High tensile steel with galvanized nut bolts are used for assembly .15. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .16. Self – explanatory stainless steel label fixed on equipment for ease of use . 2 SIT UP STATION :Providing and fixing sit-up station with below specification:1. Dimensions (LxWxH): 1500x1150x650mm.2. Fabricated with base frame of NB 50mm (G.I) ‘C’ class pipe of approved make .3. Main frame of NB 32mm (G.I) ‘C’ class pipe.4. Leg support of NB 65mm (G.I) ‘C’ class pipe (NB’ stands for normal bore i.e, internal diameter of pipe in millimeter).5. Fixed on its top is back support made of perforated MS sheet of 2mm thickness .6. All pipe are powder coated using akzonobel or equivalent paint of 80-120 micron thick .7. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.8. Zinc primer paint is applied at all the welding points prior to finishing.9. The equipmentto be fixed onground with concrete of minimum strength M-25 and expansion bolts.10. Once the concrete is set , the equipment is fixing on to it.11. High tensile steel with galvanized nut bolts are used for assembly.12. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment.13. Self – explanatory stainless steel label fixed on equipment for ease of use . 3 AIR SWING : providing and fixing air swing in a pair with below specifications:1. Dimensions (LxWxH): 1150x900x1250mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Main frame of NB 50mm (G.I) ‘C’ class pipe.4. Handle support frame of NB 40mm (G.I) ‘C’ class pipe . (NB’ stands for nominal bore i.e., internal diameter of pipe in millimeters )5. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high end quality rubber grips .9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.10. Foothold made of nylon alloy with rounded edges to prevent impact and injury .11. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .12. The equipment are fitted with inbuilt limiters to prevent unwanted movements .13. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .14. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .15. High tensile steel with galvanized nut bolts are used for assembly .16. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .17. Self – explanatory stainless steel label fixed on equipment for ease of 4 HORSE RIDER STATION:Providing and fixing horse rider station with below specification:1. Dimensions (LxWxH): 1000x600x1100mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Main frame of NB 65mm (G.I) ‘C’ class pipe.4. Handle support frame of NB 50mm (G.I) ‘C’ class pipe . (NB’ stands for nominal bore i.e., internal diameter of pipe in millimeters )5. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.9. Foothold made of NB 25mm (G.I) ‘C’ class pipe .10. Seat to be made up from virgin LLDPEmanufactured by rotational molding with 4.00mm thickness , colored , UV resistant and environmental friendly.11. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .12. The equipment are fitted with inbuilt limiters to prevent unwanted movements .13. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .14. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .15. High tensile steel with galvanized nut bolts are used for assembly .16. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .17. Self – explanatory stainless steel label fixed on equipment for ease of use . 5 LEG PRESS: Providing and fixing leg press in a pair with below specification:1. Dimensions (LxWxH): 1750x550x1600mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Main frame of NB 50mm (G.I) ‘C’ class pipe..(NB’ stands for nominal bore i.e., internal diameter of pipe in millimeters )4. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.5. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.6. Zinc primer paint is applied at all the welding points prior to finishing.7. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.8. Foothold made of NB 25mm (G.I) ‘C’ class pipe .9. Seat to be made up from virgin LLDPEmanufactured by rotational molding with 4.00mm thickness , colored , UV resistant and environmental friendly.10. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .11. The equipment are fitted with inbuilt limiters to prevent unwanted movements .12. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .13. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .14. High tensile steel with galvanized nut bolts are used for assembly .15. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .16. Self – explanatory stainless steel label fixed on equipment for ease of use . 6 PULL CHAIR : Providing and fixing pull chair in apair with below specification:1. Dimensions (LxWxH) : 1950x700x2000mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Main frame of NB 50mm (G.I) ‘C’ class pipe.4. Handleframe of NB 40mm (G.I) ‘C’ class pipe . (NB’ stands for nominal bore i.e., internal diameter of pipe in millimeters )5.All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high end quality rubber grips .9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.10. Seat to be made up from virgin LLDPEmanufactured by rotational molding with 4.00mm thickness , colored , UV resistant and environmental friendly.11. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .12. The equipment are fitted with inbuilt limiters to prevent unwanted movements .13. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .14. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .15. High tensile steel with galvanized nut bolts are used for assembly .16. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .17. Self – explanatory stainless steel label fixed on equipment for ease of use . 7 SEATED CHEST PRESS: Providing and fixing seated chest press in a pair with below specification :1. Dimensions: (LxWxH) 1800x700x2000mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Main frame of NB 50mm (G.I) ‘C’ class pipe.4. Handleframe of NB 32mm (G.I) ‘C’ class pipe . (NB’ stands for nominal bore sizei.e., internal diameter of pipe in millimeters )5.All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high end quality rubber grips .9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.10. Seat to be made up from virgin LLDPEmanufactured by rotational molding with 4.00mm thickness , colored , UV resistant and environmental friendly.11. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .12. The equipment are fitted with inbuilt limiters to prevent unwanted movements .13. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .14. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .15. High tensile steel with galvanized nut bolts are used for assembly .16. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .17. Self – explanatory stainless steel label fixed on equipment for ease of use . 8 ARM WHEEL: Providing And fixing arm wheel in a pair with below specification :1. Dimensions (LxWxH): 850x800x1800mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Mainframe wheelof NB 32mm (G.I) ‘C’ class pipe . (NB’ stands for nominal bore sizei.e., internal diameter of pipe in millimeters )4. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.5. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.6. Zinc primer paint is applied at all the welding points prior to finishing.7. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.8. Seat to be made up from virgin LLDPEmanufactured by rotational molding with 4.00mm thickness , colored , UV resistant and environmental friendly.9. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .10. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .11. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .12. High tensile steel with galvanized nut bolts are used for assembly .13. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .14. Self – explanatory stainless steel label fixed on equipment for ease of use . 9 ROWING MACHINE : Providing and fixing rowing machine with below specification:1. Dimensions (LxWxH): 1280x800x1150mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Main frame of NB 65mm (G.I) ‘C’ class pipe.4. Handle supportframe of NB 25mm (G.I) ‘C’ class pipe . (NB’ stands for nominal bore sizei.e., internal diameter of pipe in millimeters )5. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.9. Foothold made of NB 65mm (G.I) ‘C’ class pipe .10. Seat to be made up from virgin LLDPEmanufactured by rotational molding with 4.00mm thickness , colored , UV resistant and environmental friendly.11. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .12. The equipment are fitted with inbuilt limiters to prevent unwanted movements .13. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .14. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .15. High tensile steel with galvanized nut bolts are used for assembly .16. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .17. Self – explanatory stainless steel label fixed on equipment for ease of use . 10 DOUBLE CROSS WALKER : Providing and fixing double cross walker with below specifications:1. Dimensions (LxWxH): 1600x600x1600mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Handle frame of NB 32mm and 25mm(G.I) ‘C’ class pipe . (NB’ stands for nominal bore sizei.e., internal diameter of pipe in millimeters )4. Foot support frame of 100x50x2.5mm CRC rectangular pipe .5. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.9. Foothold made of nylon alloy with rounded edges to prevent impact and injury .10. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .11. The equipment are fitted with inbuilt limiters to prevent unwanted movements .12. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .13. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .14. High tensile steel with galvanized nut bolts are used for assembly .15. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .16. Self – explanatory stainless steel label fixed on equipment for ease of use . 11 TWISTER: Providing and fixing tripletwister with below dimensions :1. Dimensions (LxWxH): 1700x1300x1300mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Main frame of NB 32mm (G.I) ‘C’ class pipe.4. Handle frame supportof NB 32mm (G.I) ‘C’ class pipe . (NB’ stands for nominal bore sizei.e., internal diameter of pipe in millimeters )5. Foothold plate of made of cast iron of 12mm thickness .6. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.7. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.8. Zinc primer paint is applied at all the welding points prior to finishing.9. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured .10. The equipmentis fixed on the ground with concrete of minimum strength M-25 and expansion bolts .11. Once the concrete is set , the equipment is fixing on to it .12. High tensile steel with galvanized nut bolts are used for assembly .13. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .14. Self – explanatory stainless steel label fixed on equipment for ease of use . 12 ELLIPTICAL EXERCISER : Providing and fixing elliptical exerciser with below specifications:1. Dimensions (LxWxH): 1200x540x1600mm.2. Fabricated with main post of NB 100mm (G.I) ‘C’ class pipe of approved make.3. Main frame of NB 65mm (G.I) ‘C’ class pipe.4. Handle frame of NB 32mm and 25mm(G.I) ‘C’ class pipe . (NB’ stands for nominal bore sizei.e., internal diameter of pipe in millimeters )5. All pipe are powder coated with 80-120 micron thick akzonobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high end quality rubber grips .9. Base plate cover made of virgin LLDPE plastic by rotational molding with minimum 4.00mm thickness , UV resistant and colored.10. Maintenance free bearings of skf or equivalent make duly oil sealed and self – lubricated are used in the equipment manufactured.11. The equipmentis fixed on the ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness .12. Once the concrete is set , the equipment is fixing on to it and nuts and bolts are coveredwith base plate cover .13. High tensile steel with galvanized nut bolts are used for assembly .14. Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .15. Self – explanatory stainless steel label fixed on equipment for ease of use . 13 WEIGHT ASSISTED SHOULDER PRESS : Providing ,designing and fixing of weight assisted shoulder press fabricated with main pipe of ‘C’ class G.I pipe with minimum 75 mm dia and other pipes of 60mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Machine to have weight plate adjustment arrangement made of 202 grade stainless steel and designed to prevent theft of weight plates .plates have to be fully locked in the machine but movable for adjustment . change system should allow user to freely change resistance by changing individual weight plate of each arm . weight on each arm should be adjustable between 0-15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00mm, colorful and uv resistant and environmental friendly. Bearing used shall be maintenance free, dutyoil sealed and self-lubricated made by reputed company to be approved by engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements .all open ends of pipe to be closed by G.I / LLDPE caps or sealed in for user safety . The equipmentto befixed onground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm galvanized rod and once the concrete is set , fix the equipment on to it . all complete as per direction and approval of engineer –in-charge regarding material , shape of equipment , color on metal , seat and base plate and fixing of equipment etc . ( the cement concrete and excavation work shall be paid separately).Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .Self – explanatory stainless steel label fixed on equipment for ease of use . 14 WEIGHT ASSISTED CHEST PRESS : Providing ,designing and fixing of weight assisted chest pressfabricated with main pipe of ‘C’ class G.I pipe with minimum 75 mm dia and other pipes of 60mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Machine to have weight plate adjustment arrangement made of 202 grade stainless steel and designed to prevent theft of weight plates .plates have to be fully locked in the machine but movable for adjustment . change system should allow user to freely change resistance by changing individual weight plate of each arm . weight on each arm should be adjustable between 0-15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00mm, colorful and uv resistant and environmental friendly . . Bearing used shall be maintenance free, dutyoil sealed and self-lubricated made by reputed company to be approved by engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements .all open ends of pipe to be closed by G.I / LLDPE caps or sealed in for user safety . The equipmentto befixed onground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm galvanized rod and once the concrete is set , fix the equipment on to it . all complete as per direction and approval of engineer –in-charge regarding material , shape of equipment , color on metal , seat and base plate and fixing of equipment etc . ( the cement concrete and excavation work shall be paid separately).Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .Self – explanatory stainless steel label fixed on equipment for ease of use . 15 WEIGHT ASSISTED LAT PULL DOWN :Providing ,designing and fixing of weight assisted lat pull down fabricated with main pipe of ‘C’ class G.I pipe with minimum 75 mm dia and other pipes of 60mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Machine to have weight plate adjustment arrangement made of 202 grade stainless steel and designed to prevent theft of weight plates .plates have to be fully locked in the machine but movable for adjustment . change system should allow user to freely change resistance by changing individual weight plate of each arm . weight on each arm should be adjustable between 0-15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00mm, colorful and uv resistant and environmental friendly . . Bearing used shall be maintenance free, dutyoil sealed and self-lubricated made by reputed company to be approved by engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements .all open ends of pipe to be closed by G.I / LLDPE caps or sealed in for user safety . The equipmentto befixed onground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm galvanized rod and once the concrete is set , fix the equipment on to it . all complete as per direction and approval of engineer –in-charge regarding material , shape of equipment , color on metal , seat and base plate and fixing of equipment etc . ( the cement concrete and excavation work shall be paid separately).Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .Self – explanatory stainless steel label fixed on equipment for ease of use . 16 WEIGHT ASSISTED ROWING MACHINE: :Providing ,designing and fixing of weight assisted rowing machine fabricated with main pipe of ‘C’ class G.I pipe with minimum 75 mm dia and other pipes of 60mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Machine to have weight plate adjustment arrangement made of 202 grade stainless steel and designed to prevent theft of weight plates .plates have to be fully locked in the machine but movable for adjustment . change system should allow user to freely change resistance by changing individual weight plate of each arm . weight on each arm should be adjustable between 0-15kgs. Seats to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4.00mm, colorful and uv resistant and environmental friendly . . Bearing used shall be maintenance free, dutyoil sealed and self-lubricated made by reputed company to be approved by engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements .all open ends of pipe to be closed by G.I / LLDPE caps or sealed in for user safety . The equipmentto befixed onground with concrete of minimum strength M-20 and J shaped welded bolts of 18mm galvanized rod and once the concrete is set , fix the equipment on to it . all complete as per direction and approval of engineer –in-charge regarding material , shape of equipment , color on metal , seat and base plate and fixing of equipment etc . ( the cement concrete and excavation work shall be paid separately).Equipment made to EN16630 AND ASTM F 3101-15 and GS mark for international standard for outdoor fitness equipment .Self – explanatory stainless steel label fixed on equipment for ease of use . 17 Providing and laying in position cement concrete of specified grade including curing but including the cost of centring and shuttering and all carriages, complete. All work upto plinth level with,1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) 18 Surface dressing for ground levelling/ Providing and laying of stone pitching in horizantal including all carriages complete. 19 Providing and fixing rubber tile flooring 25 mm thick made of SBR (Styrene Butadiene Rubber) with interlocking arrangements and adhesive all complete colour and size as approved by over concrete flooring Engineer-in-Charge. 20 Providing and fixing of sign board with steel stand average size (2"-6" x 3"-0"), including writing, priming and painting and writing complete job, as per the incharge of site engineer.
|
