Tender For Electrification Work At Zila Parishad Sabha Bhawan, Kota - Supply, Installation, Testing & Comiss ... in India

Work Detail

Tender For Electrification Work At Zila Parishad Sabha Bhawan, Kota - Supply, installation, testing & Comissioning of Hybrid Ready Central Conference Controller with Recording & Web Server-Controller unit with 4 Bus Connections (4 branches or 2 closed loops) for fail-safe redundancy technology,The controller should support total cable length of a branch / loop are up to 400M or more. The maximum cable length between units or between units and central unit is 80M or more.Control & Configure the controller via the Integrated Web Server.The Controller easily integrated by using USB audio, AES-67 and analogue audio,The central engine can control up to 250 or higher units by adding network extenders,Hands-free mode upto 16 microphones or better, no need to push/press button,Camera Control integration capability,The conference units are connected in daisy chain with a CAT5e or better shielded cable (non-proprietary) over the 4 bus connections,AES67 and the multi-channel USB connection which allows to link the system with external devices such as a DSP or an external recording solution,The controller can be configurable in DSP Mode,Audio configurator, can choose where the audio is routed to and group microphones and speakers together,Recording capabilities › Internal storage- 3GB or better › External flash drive via USB-C › On a PC via multi-channel USB connection,Power button, Fan-less operation, Extended power, Wake-On-Lan, Auto Power-on, ECO mode,Volume dial- adjusts the system volume, Record button-for starts or stopsthe recording,Audio & Control feature like Dynamic Mix-Minus, Gain Sharing, API Control,Connectivity: 4x Bus connections (4 branches or 2 loops), LAN connection (Control & AES-67), 2x Lockable USB-C connections for Flash drive interface, Hybrid meeting Interface & Multi-channel audio interface. 2x Balanced XLR inputs, 2x Balanced XLR outputs, 1x Front-facing 3.5mm input & output jack for line or microphone level. 1x Power connection.Link speed 10/100 Mbps - 1 Gbps or better over the Network. Included power supply for central unit:48 VDC. Certification: CEcomplete in all respect with all required test report . Make :-BXB/ Brahler/Telvic etc and make is to be approved by department 2 Supply, installation, testing & Comissioning ofTable Top Chairman Discussion Unit with removable microphone capability.Chairman Discussion Unit with Digital Signal Processing.Unit with Priority and Next-in-Line Configuration.Priority button silences all delegate microphones and allows only the chairperson to speak.Next-in-line button gives the floor to the next speaker in a waiting list of speakers who requested to speak.User Button with feedback.High-quality integrated loudspeaker, minimum 4W or better.Audio quality : 16 bit digital or better.Microphone Frequency response: 25 Hz-15,000 Hz or better.3.5 mm stereo jack socket for headphones output with volume adjustment.Connectivity:› Concealed conference bus connections.› 2 x RJ 45 ethernet port (IN/OUT - interchangeable).› Loop through, daisy-chain cabling (non-proprietary).Unit with Bi color bar indicator.Removable 400MM gooseneck microphone is equipped with a screw lock connector,Polar Pattern: Unidirectional, Cardioid,Shielded microphone, immune to mobile phone interference,Transducer principle: Back electret (condenser),Max SPL @ 1kHz: 110 dB SPL (1% THD+N),S/N Ratio: > 67 dB(A),Sensitivity: (-40.5±2) dBV @ 1Pa, 1KHz,Microphone with Ring Indicator to light up Red when active and Green when in Request.gooseneck microphone Material: Brass.Compatible screw lock detachable microphone connectivity.Certification: CE; BIS, Make :- BXB/ Brahler/Telvic etcand make is to be approved by department 3 Supply, installation, testing & Comissioning ofTable Top Delegate Discussion Unit with removable microphone capability.Delegate Discussion Unit with Digital Signal Processing.Unit with Microphone On / Off Button.Next-in-line button gives the floor to the next speaker in a waiting list of speakers who requested to speak.User Button with feedback.High-quality integrated loudspeaker, minimum 4W or better.Audio quality : 16 bit digital or better.Microphone Frequency response: 25 Hz-15,000 Hz or better.3.5 mm stereo jack socket for headphones output with volume adjustment.Connectivity:› Concealed conference bus connections.› 2 x RJ 45 ethernet port (IN/OUT - interchangeable).› Loop through, daisy-chain cabling (non-proprietary).Unit with Bi color bar indicator.Removable 400MM gooseneck microphone is equipped with a screw lock connector,Polar Pattern: Unidirectional, Cardioid,Shielded microphone, immune to mobile phone interference,Transducer principle: Back electret (condenser),Max SPL @ 1kHz: 110 dB SPL (1% THD+N),S/N Ratio: > 67 dB(A),Sensitivity: (-40.5±2) dBV @ 1Pa, 1KHz,Microphone with Ring Indicator to light up Red when active and Green when in Request.gooseneck microphone Material: Brass.Compatible screw lock detachable microphone connectivity.Certification: CE; BIS. Make :- BXB/ Brahler/Telvic etc and make is to be approved by department . and make is to be approved by department . 4 Supply, installation, testing & Comissioning of Network Extender ,It should connect to central unit and expand the number of units in conference network,Enhances redundancy with the ability to create two loops using a single extension unit,It should have four conference port to connect the conference device,Provides network extension 50 units or more complete in all respect . Make :- BXB/ Brahler/Telvic etc and make is to be approved by department . 5 Supply, installation, testing & Comissioning of ,The Power supply should be48 VDC/180W power supply. It comes with a built-in indicator light on the front,Supply input 100-240 VAC 60/50 Hz 2.5 AOutput voltage 48 VDCOutput current 3.75 AOutput power Max.complete in all respect . Make :- BXB/ Brahler/Telvic etc and make is to be approved by department. 6 Supply, installation, testing & Comissioning ofIP camera control with set and save the preset points IP Camera. adjust default positions, Zoom in/out, movement speed, vertical/mirror and other functions with one click. Support the minimum 450 points (conference unit x 450 + Two HOME + panorama view) and control minimum of 09 ip camera. Intuitive web interface: configure the system settings and control & monitor the camera’s images on the web browser via the PC or mobile devices. Output the IP camera"s video at 1920 1080 resolution.Equipped with RJ45 port: connect with Conference MCU to remotely control the camera via Internet and HDMI,RS-232,RS-485 ports complete in all respect . Make :- BXB/ Cypress/AMX etc and make is to be approved by department. 7 Supply , Installation, Testing and Comissioning ofManaged Layer-2 Intelligent 10/100 Ethernet Switch providing 24 x 10/100/1000 MBPS Giga Ethernet ports / with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software including making connections etc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 8 Supply, installation, testing & Comissioning ofFull HD 1080p @ 60 frames per second PTZ Camera with minimum 20X Optical Zoom and FoV of minimum 57 deg, min 100 Presets.Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI & USB 3.0,Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 200° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver.Quoted model should be BIS, CE, FCC & RoHS Certified with TestLab Reports complete in all respect .Make :- Lumens/Sony/ Vaddioetc and make is to be approved by department. 9 Supply, installation, testing & Comissioning ofCamera wall mount metal stand. It should be constructed with durable material and can be attached right side up or upside down, depending on camera configuration and requirment. OEM accessory will give a perfect fit and features pre-drilled installation hardware and cable holes complete in all respect . Make :- Lumens/Sony/ Vaddio/Standerd etc and make is to be approved by department. 10 Supply, installation, testing & Comissioning ofRecording, Streaming & Webcasting Hardware simultaneously, Built-in 4x HDMI & IP Inputs with 4x Line Inputs, 2x HDMI Outputs. The system should be capable to record upto any four inputs simultaneously in a single frame and as well as individual sources simultaneously. Should have minimum 1TB inbuilt storage and can be connected to local NAS storage. The system should be able to support minimum 3 unicast streams.The recorded files should have the option of time and date stamp. Quoted model should be CE, FCC & RoHS Certified with TestLab Reports complete in all respect .Make :-Lumens/Mediapointe/Mediasite/Vbrick etc and make is to be approved by department . 11 Supply, installation, testing & Comissioning ofEight HDMI inputs matrixed to eight HDMI outputs with HDMI 2.0a specification and 18Gbps (600MHz) 4K UHD support, HD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit) & 4096×2160@60Hz (4:4:4, 8-bit), 16-bit Deep Color up to 1080p@60Hz. Eight Audio output ports can pair with eight HDMI outputs individually. Audio support Digital and analog Formats. Device should be provides an intuitive set of front panel controls with an LCD as well as RS-232, Telnet, WebGUI, and IR remote control options complete in all respect .Make :-Cypress/Crestron/ Lightware etcand make is to be approved by department 12 Supply, installation, testing & Comissioning of HDMI including 3D and 4K2K (Ultra HD) support, HDCP and DVI compliant. Supports HDCP repeater and CEC bypass functions.Supports HDBaseT Technology including 2-Way IR, RS-232 and Bi-directionlal Power over Cable (PoC) . Supports HD resolutions up to 1080p@60 Hz/36-bit and Ultra HD (4K×2K). Supports transmission distance of up to 60 meters through CAT5e/6/7 cable (1080p) or 35 meters (4K×2K) Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters at 12-bit resolution and output up to 15 meters at 8-bit resolution and 10 meters at 12-bit resolution RS-232 with baud rate up to 115200/sec. Supports wide range of IR frequency from 30 to 50 kHz Audio support up to LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audiocomplete in all respect .Make :-Cypress/Crestron/ Lightware etcand make is to be approved by department 13 Supply, installation, testing & Comissioning ofSteel &Aluminum Black Table Mounted Male to Female Cable Cubby with HDMI, C-USB for Deta, USB 3.0, Power complete in all respect . Make :-Logic/Giga/MX etc and make is to be approved by department. 14 Supply, installation, testing & Comissioning of4 x 4 USB 3.2 Gen 1 Industrial Hub Switch. Enables 4 computers to share 4 USB 3.2 Gen1 devices. Support port selection via remote controller or RS-422/RS-485 link through 5-pin terminal block. Supports DC 9-24V power input by terminal block. Supports USB BC 1.2 and over current protection. USB 3.2 Gen 1 compatibility with maximum data transfer rates up to 5 Gbps complete in all respectMake :-Aten/Cypress/NTI/ ICRON etcand make is to be approved by department 15 Supply, installation, testing and commissioning of Diagonal Size-55",Panel Type,Resolution-3840*2160 (4K UHD),Brightness-300 nit,Contrast Ratio-4000:1,Viewing Angle(H/V)-178/178,Response Time-8 ms,Display Colors-16.7M,Color Gamut-72%,Dynamic C/R-mega,Audio-Built in Speaker(10W + 10W),Input Type-HDMI 2.0 (2),HDMI 2.0 (2),USB 2.0 x 1,Stereo Mini Jack, HDMI/Audio(Common),Output Type-Stereo Mini Jack,Duty Cycle-16/7,Special features-UHD Signage with Built-in MagicInfo Lite,Haze 2%,Temperature Sensor,Clock Battery(168hrs Clock Keeping), Built in Speaker(10W 2ch), IP5x Rating, Auto Source Switching & Recovery,,LFD Home UI, Button Lock, Hot key option, Plug&Play (Initial Setting)External Control-RS232C(in) thru stereo jack, RJ45,Power Consumption(Max)-154 W/H OR LESS,Standby Mode Power-200*200,Operating Temperature-0 ℃ ~ 40 ℃,Humidity-10 % ~ 80.0 %,Safety-CE, UL & BIS,EMC-Class B.Make- Samsung/NEC/Christie etcand make is to be approved by department 16 Supply, installation, testing and commissioning of Diagonal Size-65",Panel Type,Resolution-3840*2160 (4K UHD),Brightness-300 nit,Contrast Ratio-4000:1,Viewing Angle(H/V)-178/178,Response Time-8 ms,Display Colors-16.7M,Color Gamut-72%,Dynamic C/R-mega,Audio-Built in Speaker(10W + 10W),Input Type-HDMI 2.0 (2),HDMI 2.0 (2),USB 2.0 x 1,Stereo Mini Jack, HDMI/Audio(Common),Output Type-Stereo Mini Jack,Duty Cycle-16/7,Special features-UHD Signage with Built-in MagicInfo Lite,Haze 2%,Temperature Sensor,Clock Battery(168hrs Clock Keeping), Built in Speaker(10W 2ch), IP5x Rating, Auto Source Switching & Recovery,,LFD Home UI, Button Lock, Hot key option, Plug&Play (Initial Setting)External Control-RS232C(in) thru stereo jack, RJ45,Power Consumption(Max)-204 W/H OR LESS,Standby Mode Power-400*300,Operating Temperature-0 ℃ ~ 40 ℃,Humidity-10 % ~ 80.0 %,Safety-CE, UL & BIS,EMC-Class B,make- sumsung/NEC/Christieetcand make is to be approved by department 17 Supply, installation, testing & Comissioning of Bezel less active LED of diagonal size 135’’ ,Pixel Pitch-1.56 mm COB technology(Chip on board) ,Resolution 1920x1080, Aspect ratio 16:9,Brightness -600 nits, refresh rate 3840 Hz, contrast ratio 25000 :1, Audio- 12 W X 2 speaker, technology-COB (Chip on Board) , cabinet material-Aluminium , Viewing angel (H/V)-170/170 Input -2 X HDMI ,3 X USB 3.0, SPDIF X 1, RJ45 X1 ,Output - Audio out,RJ45 ,LED Life --150000 hrs or more , Inbuilt RAM/Storage -4 GB RAM / 32 GB storage ,with 5 years warranty. OEM should have their own registered office in India.BIS, ISO 9001, ISO 14001, OHSAS 45001 & ISO 27001:1 certified, BIS should be name of same manufacturer and quoting OEM, Emitted brightness measurement tool namely a luminance meter available with them (which can provide direct brightness reading in cd/m²) for brightness measurement of offered LED screen complete in all respect. Make :-Delta/Barco/NEC etc and make is to be approved by department. 18 Supply, installation, testing & Commissioning ofUHD+ 3x2 Matrix Switcher with USB Ethernet Hub. Supports auto-switch functionality with a “last memory” feature for both input ports and USB ports. Supports 4K HDR formats by HDR10, HLG and Dolby Vision. Dual HDMI outputs can directly feed into two displays side-by-side. Support USB 3.0 with one USB type B and one USB type C interface for connection to a host PC, plus two USB type A ports for peripheral devices such as keyboard- mouse and storage extension. Supports 4K HDR formats by HDR10, HLG and Dolby Vision complete in all respect.Make :-Cypress/Crestron/ Lightware etc and make is to be approved by department. 19 Supply, installation, testing & Commissioning of USB 3.2 Extenders. Transmitter should have 1xUSB C input port,1X RJ45, 1xUSB-A Output Port. Receiver should have Input Port 1×Cat5e/6A/7 (RJ45).1×USB-C, 3×USB-A Output Port. Bandwidth upto 5Gbps (SuperSpeed), Tranmission distance upto 100M. Devices should be controlable by the USB host on a transmitter. Should have backward compatibility with USB 2.0 complete in all respectMake :-Cypress/Crestron/ Lightware etc and make is to be approved by department. 20 Supply, installation, testing & Commissioning of 4K60 UHD HDMI splitting and distributing a single HDMI input to 4 HDMI outputs. Input and output Signal Types 4K@60 8bit YUV 4:4:4, HDR 12. HDCP Compliance: 2.2 . Support for Automatic 4K to 1080p down-scaling and color space conversion (4:4:4 to 4:2:0) for each independent output based on each connected display’s EDID. Digital Audio Format:HDMI LPCM(8 Channels), Bitstream, HD Bitstream complete in all respect . Make :-Cypress/Crestron/ Lightware etc and make is to be approved by department 21 Supply, installation, testing & Commissioning ofHDMI to USB 3.0 video converter. Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output. simultaneously streaming the audio and video signal at 1080p to a USB connected PC for capture or re-broadcast. Automatically scales 4K sources to 1080p for USB capture. Video timing stabilization feature helps to ensure that the USB capture stream won’t lock up or drop, even if the HDMI input source is intermittent or becomes disconnected. Digital stereo audio from either HDMI (LPCM 2.0) or the 3.5mm analog audio input will be captured with the HDMI video source and is selectable within the configuration software. Inputs 1x HDMI [1x Uncompressed AV and Data] 1x 3.5mm [1x Stereo(L/R)]. Outputs 1x HDMI [1x Uncompressed AV and Data]. 1x USB Type-B [1x Propriety Data] complete in all respect .Make :-Cypress/Crestron/ Lightware etc and make is to be approved by department . 22 Supply, installation, testing & Commissioning ofconferencing digital audio DSP with 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz processor or better with following features and specifications are required. The DSP shall have 12 balanced inputs and 8 balanced output channels for microphone or line-level analog audio signals, each independently controllable . The DSP shall contain 12 channels of acoustic echo cancellation (AEC), with multiple references, routable to analog and/or Dante® inputs. The DSP shall have Dante digital audio networking up to 64 x64 channels, an Ethernet connection for control and programming on an RJ-45 jack and VoIP connection for 2 lines, GPIO – 5x5 expandable general-purpose contro, PSTN and USB audio and 8 digital channels on an RJ-45 jack.It shall haveIT web configuration page, USB Port – Micro-B USB for PC soft codecs with stereo input and output,ultra-low latency digital audio, Serial Port – 3-wire RS-232C (DTE) serial interface connection.It shall Supports remote zone controllers, PSTN (RJ-11) – Supports worldwide analog telephone connection, Dynamic Range> 115 dB, A-weighted 20 Hz – 20 kHz;THD : < 0.002 % or better ,Maximum Input Level +24 dBu;Phantom Power +48 VDC, 10 mA, selectable per input. The audio DSP shallinclude configurable signal processing, signal routing and mixing, equalization, filtering,dynamics, delay, conference room router, conference room combining, as well as control,monitoring, and diagnostic tools. The audio DSP shall control and proxy allexpansion devices and other Dante endpoints complete in all respect . Make :-Bose/Powersoft/EAW etcand make is to be approved by department. 23 Supply, installation, testing & Commissioning ofClass D configurable amplifier with total 600W output power or better across 4 outputs, 4/8ohms, 70/100 Voltor mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ; S/N Ratio > 99db and THD <.3% at rated output complete with standard accessories as required. Built in DSP for Matrix routing, Speaker EQs, delays etc. Phoenix Input and output terminals, shall support remote Volume controllers (wired) for individual channels.Shall also have built in 4 channel or better Digital Audio input port Compatible with offered DSP complete in all respect . Make :-Bose/Powersoft/EAW etcand make is to be approved by department. 24 SITCofof 2-way IP55 rated (as per IEC 529) indoor/outdoor surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Usable Frequency range (-10dB) of 65Hz to 20kHz; Power handling of 200Watt peak; Nominal dispersion of130°(H) × 130°(V); Sensitivity of 87 dB SPL and Max SPL of 110 dB SPL peak; Nominal impedance of 8 Ohms with an Integral multi-tap Transformer with selectable tap settings of 6/12/25/50W@100V or better. The loudspeaker system shall be comprised of a powder-coated aluminum grill; 5.25-inch weather-treated woofer and 1-inch neodymium dome tweeter coaxially mounted enclosed in engineered-plastics with an In-built waveguide designed to provide uniform area coverage across the loudspeakers frequency range. UL-1480A rated complete in all respect. Make :-Bose/TW Audio/EAW and make is to be approved by department. 25 Supply, installation, testing & Commissioning of 23.8-inch display with FHD (1920 X 1080) resolution. Connectivity: 2 HDMI (with H-Frequency: 30~83kHz / V-Frequency: 56~75Hz); D-Sub - 1, Headphone Out: 1 Contrast Ratio: 1000:1(Typ.) Response Time: 5 ms View angle: 178/178 with Anti glare 3H surface treatment with Keyboard and Mouse complete in all respect . Make :-LG/HP/DElletc and make is to be approved by department. 26 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it"sISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure "A" attached with this BSRShort point (up to 3 mtr.) 27 Medium point (up to 6 mtr.) 28 Long point(up to 10 mtr.) 29 Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it"s ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure "A" attached with this BSROn board 30 Short point (up to 3 mtr.) 31 Medium point (up to 6 mtr.) 32 Long point(up to 10 mtr..) 33 S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure "A" attached with this BSR25 mm 34 50 mm 35 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure "A" attached with this BSR2 x 2.5 sq. mm. + 1x1.5sqmm 36 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 37 4 x 10.0 sq.mm 38 4 x 16.0 sq.mm 39 2 x 6.0 sq. mm. + 1 x 4.0 sq. mm. 40 Supply and laying following size twin parallel type Speaker cables ofIS/ISO 9001 CERTIFIED COMPANY made with multi wire, bright annealed flexible bare electrolytic grade copper conductor, insulated with specially formulated transparent grade PVC compound, red strip for identification in existing conduit etc. as required. For additional technical parameters of product / work refer Annexure "A" attached with this BSR2.5 Sq.mm 41 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure "A" attached with this BSRSingle pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating Four pole MCB (With B/C curve tripping Characteristics) 42 50/63 A rating 43 80 A rating 44 Providing & Fixing of 240/415 V factory fitted RCBO with overload, short-circuit and earth leakage protectionwith ISI marked (IS12640-2)/ conforming to IEC 61009-1, breaking capacity 10 KA,provision for pad lock, min. Electrical operation 10,000 upto 63 A rating , minimum phase termination capacity of 35sq.mm. , IP 20 contact protection with existing distribution board / sheetincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure "A" attached with this BSR Four pole 100/300 mA sensitivity63 A rating 45 Providing & Fixing of din rail mounting LED Indicating Lights with following description and configuration in existing distribution board / sheet including making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure "A" attached with this BSRRed / Yellow / Blue / Green 46 Red-yellow-Blue 47 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure "A" attached with this BSRGlazed door (Three phase) IK-09 and IP-43 with Metal end box 12 Way 48 Providing & Fixing of following modular accessories as per PWD specification for electrical Works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure "A" attached with this BSRRJ-45, Cat 6 computer jack with shutter 49 Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure "A" attached with this BSR 50 SITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel as specifications andOther parameters requiredas per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:- (a)Thickness of CRCA sheet shallbe 2.0 mm,cable alley compartments having concealed hinged type doors with key type lock with / withoutdetachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided (b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting,pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel.The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire. [c)Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar(>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only.All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar/ Flexible wire for Interconnection between Main busbar and Switchgearis to be Paid Extra ) (d)Wiring between components within switchgear and Incoming / outgoing cableshall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging. (g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out.(f)Floor mounted panel shall be mounted on Base frame of ISMCchannel size 100 x 50 x 5 mm( to be paid Extra ) (h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 51 Supplying and fixing of Aluminium (IEC 60105 ISO 209-1,2) / Copper (IEC 60028) bus bar by means of SMC / DMC type insulatorwith standard short circuit withstand capacity, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .Electrolytic grade Aluminium bus bar 6010 grade 52 Providing & Fixing of IS: 13875 & IEC :61326 confirming LED Digital type(up to 500) V range Volt meter / Direct- Ammeter /CT oertated ammeter/ Frequency meter / KWH meter / Multi Function Meter / Power analyzer of class 1 accuracyas per IS : 1248 of size 96mm x 96 mm including making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . Three phase with universal Auxiliary supply + AMP + HZ + PF + KW + KVA + KVAR + KVARH + KWH + DUAL ENERGY+ ENERGY+THD-I, THD-V & RUN HRS + MD with RS485 53 SITC of3 /4pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator,line load interchangeability,designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree,pollution degree 3, having positive isolation capability, push(test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage690 V.provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure "A" attached with this BSR 4 pole MCCB With Thermal Magnetic release200 Amp , 25 kA, adjustable O/L & adjustable S/C setting, 54 125 Amp , 25 kA, adjustable O/L & adjustable S/C setting, 55 Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have it"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure "A" attached with this BSR3.5 core*95 SQ MM 56 Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) 57 Providing & Fixing of Heavy duty capacitor start, copper woundDouble ball bearing900/1400 RPM single phaseExhaustfan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .300 mm sweep(900/1400 RPM) 58 Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure "A" attached with this BSR5 step fan regulator 2 Module 360 dgree rotating 59 Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminiumhousing with in built driver, System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .1170mm(+/-10%) LED batten with min. lumen output 2200 lm 60 Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / SqaureSMD Mid Power LED Downlight with power coated die-cast aluminum housingwith UV Stabilized non yellowish Diffuser withBIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .Minimum lumen output 1950 lm 61 Providing & Fixing of IP20, 2"x2" LED Surface/ Recessedmounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection(Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 ,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .Recessed MountingMinimum lumen output 4200 lm 62 Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with HDPE, U/UTP (Unscreened/Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Outdoor Cable as per latest ammendments of ANSI/TIA/EIA-568 C.2 & ISO/IEC 11801 2nd Ed, The copper conductors should be balanced twisted in pairs, seperated by a cross divider & protected by LSZH PVCouter jacket of UV resistant. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. Should meet IEEE 802.3af & IEEE 802.3at for POE applications. Cable Should support Ethernet10GBASE-T according to the standards. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 63 Supply and Installation of unsheilded/360 degree sheilded Information outlets made of high impact plastic body with ABS, FR Grade halogen free material with provision for protection against dust in jack, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA/EIA 568 C.2 standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM,Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP) Specifications in existing modular/MS Boxes along with necessory connections as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . Cat 6A, Sheilded Information Outlet 64 Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture ,material should bePC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. OEM. Dimensions should be 86mm X 86mm as required complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . Dual Aperture 65 Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP).All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 3 Mtr 66 Supply & Installation of IP-20 & IK-08 , UL Listed Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet,Vertical Mounting Rail 1.6 MM with "U"Marking, front sturdy sheet steel frame folded from one piece and welded with 5mm toughened glass door, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, Set of 75 mm height 4 castors, 2 of which have brakes, Accessories like: 5 Nos of 19" 1U Horizontal Cable manager, 2 Nos of vertical cable managers, 1 no. Keyboard Tray,4 Nos of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 2 No of 19" 1U, mountable socket strips with 6 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 42 U Rack with Width 600 mm &Depth 800 mm 67 Supply , Installation, Testing and Comissioning of Air Cooled Cassette typeAir conditioners complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, +/- 10% 50 Hz ,1 /3 phaseACsupply, apable of performing cooling, dehumidification,Air circulation, filteration & ventilation of following capacity with Scroll /rotary/twin rotary compressor. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . Inverter Type 3.8 / 4.0 TR 68 2.0 TR ISEER not less then 3.5 69 Supply , Installation, Testing and Comissioning ofInverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and50 hz , single phaseACsupply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 2.0 TR ISEER not less then 3.8 70 Supplying and drawing flexible / stranded bare copper conductor, PVC / XLPE insulated, overall aluminium mylar tape shielded ATC drain wire and outer PVC sheathed industrial Instrumentation (shielded)cables voltage grade 300/500 V as per BS /EN 50288-7 in existingsurface or recessed PVC/ MS conduit/casing capping/ Cable tray / Open Duct making connections, testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for cables. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 4 core x 2.5 Sq.mm 71 Supply, installation, testing and comissioning ofinterconnectingcopperrefrigerant pipingof DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink MarkBrand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified "Class O" in Fire Propagationas per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 22.2 mm O.D., wall thinkness ≥ 1.0mm (insulation – 19 mm thick) 72 12.7 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick) 73 Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping withfittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing,support with MS hanger on ceiling or recessed in wallwith chasing & plastering with 6 mmthickclosedcellelastomeric nitrile rubberinsulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .32 mm 74 Making hole in stone masonary/ RCC wall/ RCC slab with core cutter for accomodating refrigerant pipe/ drain pipe/ MS pipe/ cables etc of following dia200 mm dia per running inch length 75 Supply & fixing MS powder coated stand suitable for 2.5/3.0/4.0 Tr outdoor type of Split/Ductable/Tower AC.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 76 SITC of Radiator Cooled and Turbo charged Silent DG Set (As per latest CPCB emissionnorms) havingspecifications as per A, B, C, D, E, F,G,H & I A) 1500 RPM Diesel Engine conforming to BS:649/5514 of suitable BHP(up to 82.5 kVA 6 cylinder or Below required, 125 kVA & Above ratings 6 cylinder or aboverequired ) capable of taking 10% over loading for one hour after 12 hours of continuous operation.,Dry exhaust mainfold with Hospital grade silencer and catalytic convertor(isolated from main DG chamber),up to 3 M exhaust piping (with LRB insulation & Alum. cladding ) as required . B)AC Brush less SPDP Alternator conform to BS 5000 (part 99) or IS/IEC 60034-1. . Alternator shall be self regulated with standard Alternator Protection( Over voltage , over speed & under voltage, under speed warning & shutdown).Engine & Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupledC) CPCB / ARAI approved Standard canopy with Weatherproof, powdercoated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with sidewall fabricated from 1.6 mm CRCA sheet & filled with glasswool (96Kg/m3) / Foam. as per IS8183 the doors of 28/40/50/85mm thick as perrating and fabricated from 1.6mm CRCA sheet packed with accoustic material, All doors/opening are sealed with neoprene /EPDNgaskets. The DG Set has Inbuilt / External in fuel tank to run 6 to 8 Hrs as per OEM standard, with protection and tripping of DG set against temperature of more than 50 degree centigrade. D) Electronic / Mechanical governor, Manual & electric Start ,Batteries with battry charger,Engine instruments panel,AVM pads All controls for operation of DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Panel mounted MCCB/ACB of suitable rating, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be less than 75 dB at a distance of 1 Mtrs. duly certified by authorised agency etc. complete in all respect of following capacity : E) (i) Accoustic glass wool wall thickness should not be less then 40mm and not less then 20mm PU foam upto rating 100 KVA. (ii).Accoustic glass wool wall thickness should not be less then 65mm and not less then 50mm PU foam upto rating 250 KVA. (iii)Accoustic glass wool wall thickness should not be less then 100mm forrating above 250 KVA.F) First filling of the fuel tank shall be done by contractor and the prevailing fuel cost at that time shall be reimbursed to the contactor by department. G) Servicing Contract of DG Set from OEM"s Authorised Service Dealer as per OEM guidelines during the DLP period shall be done by contractor including all consumables, actual charges shall be reimbursed to the contractor by End User Department. H) Manufacturer / OEM must have its authorized service dealer in Rajasthan. Which can provide service within 6 Hours of compalint registration. I) DG set will be offered for Inspection and Testing at Manufacturer"s Works in presence of Departmental Engineers. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 82.5 KVA at 0.8 pf 415V 50Hz 3-ǿ 77 SITC of PLC Based Auto main failure (AMF) Panel fabricated from CRCA sheet steel 2 mmThick , Powder coated finish , Engine Start & Stopcommands, control Relays , Ammeter & Voltmeterwith selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets: Appropriate Test Certificate/ report of product/accessories from OEM/Panel Manufecturer shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR . 50 to 82.5 KVA 78 Providingexperienced and Highly skilled/skilled/ semi-skilled/Un Skilledlabour for electric repair/ maintenance / operation of Air conditioning/Air cooling/Fire fighting/Lift/DG set/CCTV/EPABX or any other electromechanical systems as per requirement (one shift of 8 Hrs per day for 26 Working Days in a month)skilled Labour

Contact Information