Tenders Are Invited For Meters-Delivery Of A System For Measuring Specific Mechanical Quantities To Examine ... in Bulgaria

Work Detail

Meters-Delivery Of A System For Measuring Specific Mechanical Quantities To Examine The Border Of Material Fatigue For The Needs Of The Plovdiv Branch Under Project 24 Pl-I002. The Subject Of The Contract Is “Delivery Of A System For Measuring Specific Mechanical Quantities For Examining The Border Of Material Fatigue For The Needs Of The Plovdiv Branch Under Project 24 Pl-I002. The System Consists Of The Following Components: -Axyal Extenster -1 Set Of Excitation: 5 To 10 Vdc, Maximum 12 Vdc Or Vac Output: 2 To 4 Mv/V Nominal; Accuracy: Configurations Must Meet The Requirements For Accuracy According To The Standard Astm E83, Class B-1, For Lengths Of Measuring Instruments ≥6 Mm And Class B-2 For ≤5 Mm, As Well As The Requirements Of Iso 9513, Class 0.5. Linearity: ≤0.15% Of The Full Scope Of The Scale; Temperature Range: -40 ° C (Or Lower) To +100 ° C (Or Higher); Cable: Built -In, Ultrasound Cable 2.5 M (8 Feet); Fast Attachment Kit: Suitable For Round Samples With A Diameter Of 0.5-13 Mm (Or Larger) And Flat Samples With A Thickness Of 0.1-13 Mm And A Width Of Up To 15 Mm (Or Larger); Working Effort: From 10 To 100 G -Destruction Mechanics Meter -1 Set Of Excitation: 5 To 10 Vdc, Maximum 12 Vdc Or Vac Output: 2 To 4 Mv/V, Nominal; Accuracy: Configurations Must Meet The Requirements For Accuracy Under Astm E1820, Iso 12135 And Iso 9513, Class 1; Linearity: ≤0.2% Of The Full Range Of The Scale Temperature Range: From -40 ° C (Or Lower) To +100 ° C (Or Higher) Cable: Built-In, Ultrasound Cable 2.5 M (8 Feet) Working Effort: 9 To 14 N; Set Of 2 Pcs. Fastening Plates. -Usb Converter Of Signal Signals For Integrated Software (Recalled To Use Both Extensometers) -1 Set Of Power Supply: Usb Power ≥120 000 Reports At 10 Hz; ≥50,000 Reports At 100 Hz Data Transmission Speed: 1-200 (Or More) Reports Per Second; Eleuable Low Filter Included Software For Enrollment Available Set Of Ascii Commands For Developing Custom Software All Characteristics And Requirements Are Specified In The Technical Specification Of The Participation Document. The Supplied Equipment Must Be New, Unused, In Original Factory Packaging (Where Applicable). Advanced Equipment Is Completed With The Necessary Elements So That It Is Working And Performing The Functions Embedded In The Specification. If It Turns Out That The Equipment Cannot Perform A Function Due To A Shortage Or Lack Of The Relevant Elements, They Must Be Delivered At The Expense Of The Contractor. The Contract Shall Enter Into Force From The Date Of Its Registration In The Office Of The Contracting Authority. The Maximum Delivery Time Is Up To 120 Calendar Days From The Date Of Registration Of The Contract In The Office Of The Contracting Authority. The Warranty Period Of The Equipment At Least 12 Months From The Date Of Signature Without Notice Of The Acceptance Protocol, Certifying The Delivery Of The System. Payment Is Made In Accordance With The Terms Of Contract

Contact Information