|
tender for State Health Transport Organisation Day To Day Annual Maintenance Work Of State Health Transport Organisation 142 A J C Bose Road Kolkata 14 For R And B And S And P Work- 1 Stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish with in a lead of 75 m as directed. . 2 Dismantling all type of masonry excepting cement concrete plain of reinforced stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.. 3 (a) In ground floor including roof. 4 Dismantling R.C.floor, roof,beams etc. including cutting rods and removing rubbish as directed with in a lead of 75 m. including stacking of steel bars. 5 (a) In ground floor including roof. 6 Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints withlocal sand. 7 Brick work with 1st class bricks in cement mortar (1:6) 8 In Super structure, ground floor. 9 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 10 Ordinary cement concrete(mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant IS codes. 11 (a) Pakur Variety. 12 (a) Applying 2 coats of bonding agent with synthetic multi functional rubberemulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer"sspecification [Cement to be supplied by the Department] 13 Artificial stone in floor, dado, staircase etc. with cement conctrete (1:2:4) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners includingraking out joints or roughening of concrete surface and application of cement slurry before flooring works, using cement @ 1.75 kg./sq.m. all complete including all materials and labourIn ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement.Using grey cement. 14 (ii) 25 mm. thick. 15 Supplying,Fitting & fixing 1st quality Ceramic tiles inwalls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. 16 (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20 Kg/Sq.m. 17 (b) Area of each tile the above 0.09Sq.m. 18 (i) Coloured decorative. 19 (B) Wall With Sand Cement Mortar(1:3)15mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m. & joint filling using white cement slurry @0.20kg/Sq.m. 20 (b) Area of each tile the above 0.09Sq.m. 21 (i) Coloured decorative. 22 Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brand conforming to IS 15622:2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.)≤ 0.08 %] in floor, skirting etc. using polymerised adhesive of 6mm thick layer applied directly over finished artificial .... 23 (a) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5mm thick) 24 Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. 25 (i) with 1:6 cement mortar. 26 (b) 20 mm. thickplaster. 27 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). 28 (e) sal : malayasian. 29 Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite doorframe as per approved section with glass fibre reinforced plastic moulded skinsand a special sandwich core, so as to impart monolitaheic composite structure asper approved technology of Department of Science and Technology (DST) tosafisfy IS: 4020 door testing performance criteria.. 30 (i) 66mm x 90mm 31 supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar , end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction . ( cost of concrete will be paid separately). 32 (b) 40mm x 6mm, 200mm Length . 33 Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite doorshutters as per approved design with glass fibre reinforced plastic moulded skinsand a special sandwich core, so as to impart monolitaheic composite structure asper approved technology of Department of Science and Technology (DST) tosatisfy IS:4020 door testing performance criteria.In ground floor. 34 (i) 32 mm thick 35 Iron butt hinges of approved qualityfitted and fixed with steel screws, with ISI mark. 36 (vii) 100 mm x 58 mm x 1.90 mm. 37 Supplying solid flush type doors of deluxe decorative (both side) quality,conforming to I:S 2202 timber frame consisting of top and bottom rail and sidestyles of well seasoned timber 65mm wide each and the entire frame fitted with27.5mm wide battens places both ways in order to made the door of solid coreand internal lipping with teak, mahogony or rose wood approved decorativeveneers using phenol formaldehyde as glue etc. complete, .... 38 (a) 35mm thick shutters (single leaf) 39 Iron socket bolt of approved quality fitted and fixed complete. 40 (e) 300 mm long x 10 mm dia bolt. 41 (c)150 mm long x 10 mm dia bolt. 42 (i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm dia rod with centre bolt and round fitting. 43 (C)300 mm long . 44 (b) Supplying "Godrej"mortice lock chromium plated with keys 6 levers, including fitting and fixing complete. 45 (i) Brass floor door stopper. 46 (ii) Godrej hydraulic door closer fitted and fixed complete. 47 (b) Medium type. 48 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete:. 49 (a) With continuousplate base (hexagonal/round rod). 50 (vii) 150 mm grip x 12 mm dia rod. 51 Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde sythetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per designn as per approval and direction of Engineer-In-Charge.[ excluding the cost of supporting frame work and teak wood batten/ipping ]in ground floor. 52 (iv)12 mm. 53 Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. 54 White washing includingcleaning and smootheningsurface thoroughly :All floors:. 55 (b) Two coats (to be done on specific instruction.). 56 Applying interior grade acrylic primer of approved quality and brand on plasteredor concrete surface old or new surface to received distemper /Acrylic emulsion paint including scraping and preparing the surface thoroughly , complete as per manufactured specification and as per directions of the EIC.In ground floor. 57 (a) one coat. 58 (i) water based interior grade Acrylic primer. 59 Applying acrylic emulsion paint of approved make and brand on walls and ceiling including sand papering in intermediated coats including putty ( to be done under specific instructions of superintending engineer): (two coats). 60 (ii) luxury quality. 61 (b) Rendring the surface of walls and ceilingwith white cement based wall putty of approved make and brand (15mm thick). 62 French polishing to wood work including preparingsurface (ordinary gloss). 63 (b) On old French polished surface including complete removal of old polish. 64 Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete (In all floors for internal wall & upto 6m height for external wall ). 65 (ii) 4 mm. thick. 66 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium slidingWindow of all Aluminium sections viz. window frame (top,bottom & sideframe), shutter (top, bottom, side & interlock member) made of aluminiumalloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodisedconforming to IS 1868-1983, fitted with all other accessories viz. PVCroller, EPDM ..... 67 Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz top,bottom and side member, intermediate member , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983and IS: 1285-1975, annodized conforming toIS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges ...... 68 a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90sqm 69 Supplying bubble free float glass of approved make and brand. Conforming to IS: 2835-1987. 70 (iv) 5 mm thick coloured / tinted / smoke glass. 71 (A) Providing and fixing of false ceiling with powder coated exposed G.I. gridsuspension system (T-GridT 2430 or having load carrying capacity with midspan deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c )consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long andWall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on theperimeter of the wall by steel screws with distance 300mm c/c. The Main Runnersto be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cutslots of Main Runner at a regular interval of 600 mm to form a ... 72 A) False Ceiling (with 6mm thick Fibre Cement Designer Board and T-Grid T-2430). 73 Supply of G.I. pipes of TATA make of different dia. including necessary sockets. 74 15 mm dia. 75 Medium quality. 76 20 mm dia. 77 Medium quality. 78 25 mm dia.. 79 Medium quality. 80 Supplying, fitting and fixing Peet"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I marking with fittings(tested to 21 kg per sq.cm.). (Note: Item (vii),(viii) and (ix) to be done as per specific direction of the Engineer-in-charge). 81 25 mm. 82 Supplying, fitting and fixing shower of approved brand and make. 83 Hand shower(Health Faucet) with 1mtr Fexible Tube with wall Hook (Equivalent to code No.573 & Model-ALLIED of Jaquar or Similar) 84 Supplying, fitting and fixing bib cock or stop cock. 85 PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm 86 Supplying, fitting and fixing bib cock or stop cock. 87 Chromium plated Bib Cock short body (Equivelent to Code No.511 & Model- Tropical /sumthing special of ESSCO or Similar brand). 88 Supplying, fitting and fixing PVC pipes of approved make ofof Schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pi;es as per IS:1239 (Part-I) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect ..... 89 For Exposed Work PVC Pipes. 90 80 mm. 91 Labour for fitting and fixing G.I pipes above ground (exposed) in structure with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height.(Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting will be paid seperately). 92 15 mm dia. 93 20 mm dia. 94 25 mm dia. 95 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. 96 Supplying, fitting and fixing cast iron raised rain proof tank cover 450 mm. 97 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. Brackets on 75 mm X 75mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30mm dia, approved quality P.V.C.waste pipe with C.P. nut 32mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P.nut including mending good all damages and painting the brackets with two coats of approved paint. 98 550 mm x 400 mm size. 99 Supplying, fitting & fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P.nut, 15mm dia. 100 750 mm long. 101 Supplying, fitting and fixing approved brand 32mm dia P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 102 1050mm long. 103 Supplying, fitting and fixing Waste fittings complete. 104 C.P. over brass. 105 32 mm dia. 106 Supplying, fitting and fixing pillar cock of approved make. 107 CP Pillar Cock-15 mm. (Equivalent to Code No.507 & Model-Tropical/Sumthing Special of ESSCO or similar brand). 108 Supplying, fitting and fixing pillar cock of approved make. 109 CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (CodeNo.5041 & Model - FLORENTINE of JAQUAR or similar brand). 110 Supplying, fitting and fixing cast iron "P" or "S" trap conforming to I.S. 3989/1970 and 1729/1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). 111 P" Trap. 112 100 mm. 113 Supplying, fitting and fixing cast iron extension pipes for using in Traps only (connector) conforming to I.S.3989/1970 and 1729/1964 including lead caulked joints complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). 114 100 mm x 600 mm. 115 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 . 116 Single socketed3 meter length. 117 160 mm. 118 Fittings. 119 Bend 87.5o. 120 160 mm. 121 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any foor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Enginer-in-charge) Payment will be made on centre line measurement of the total pipeline including specials.). 122 Above ground. 123 160 mm dia. 124 Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marble square cut both side polished with two front corners rounded and edges polished. 125 Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved makecomplete in position with necessary bolts, nuts etc. 126 With "P" trap (with vent). 127 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved makein position complete excluding "P" or "S" trap (excluding cost of concrete for fixing). 128 580 mm X 440 mm. 129 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws supplied, fitted and fixed complete. 130 Anglo-Indian . 131 Plastic (hallow type) white.
|
