Tenders Are Invited For Single -Purpose Sports Facilities Construction Work - Refurbishment Of The Great Käl ... in Germany

Work Detail

Single -Purpose Sports Facilities Construction Work - Refurbishment Of The Great Kälbersteinschanze - Starting Track System. The Services Described Below Include Fully Manufacturing, Supplying And Assembling A Start -Up Track System With Accessories For Ski Jumping Hill As A Summer And Winter Track System. The Offer Must Be Taken Into Account, All Suitable Work Aids For Material Transport And Assembly, All Necessary Arrival And Departure, Overnight Stays As Well As All Materials, Fabrics, Tools And Fortifications, As Well As Setting Up Costs For Construction Sites, Holding, Operating And Rooms. No Crane Is Available On Site. Structural Description Of The Ski Jump: The Large Kälbersteinschanze Is Designed As Hs98. The Profile Is Approved By The Fis. The Gradient Of The Start Describes A Straight Line And A Subsequent Clot Hoid With A Radius 85M At The Transition To The Ski Jumping Table, As Well As The Table Stretch At The Ski Jump Table. The Incline Of The Start -Ups Before The Rounding Is 35 °. The Ski Jumping Table Has A Tendency Of 10.7 °. It Must Be Guaranteed That The Tendency To Spend In The Area Of ​​The Ski Jump Table Can Be Readjusted At +/- 0.2 °. It Is Expressly Demanded From The Fis That It Is Possible To Be Able To Adjust Or Readjust The Tens Of Table By +/- 0.2 °. The Starting Track Consists Of A Steel Structure. The Upper End Is A Steel Trapezoidal Sheet Across The Entire Width. The Total Length Of The Starting Track Is Approx. 92.2M Plus The Parking Position For The Milling Van Of Approx. 2.8M, A Total Of Approx. 95.0M. The Width Between The Inner Protective Planks Is Approx. 2,500Mm. The Start -Up Construction Has A Total Width Of Approx. 4,500Mm In The Section From The Ski Jumping Table At Station 0 To Station. At Station 60M Is The Athlete Elevator. From Station 60M To The Existing Wooden Tower Are On One Side. The Total Width In This Section Is Approx. 7,650Mm. At The Upper End Of The Starting Track In The Existing Wooden Tower There Is The Parking Position Of The Lane Milling Mill And Above The Wind Position. The Winch And Lane Milling Machine To Be Delivered And To Be Installed Must Be Integrated Into The Existing Wooden Tower. The Steel Trapezoidal Sheet Is 400Mm Below The Starting Track.

Contact Information