|
Redevelopment Of Parks Under Vda, Varaansi. (Part-3) - PARK CIVIL WORK 2 Cleaning grass and removal of rubbish up to a distance of 30 m out side the periphery of the area as per technical specification clause 201 3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 4 Demolishing cement concrete or bricks or Granolithic floor including base concrete and including stacking of dismantled material as directed by engineer in charge within a distance of 50 m 5 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 6 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 7 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 8 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. 9 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil 10 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transportincluding loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 11 Excavating, supplying and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 12 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 13 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 14 Providing and laying stone/ boulders Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications 15 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 16 BrickworkM-150 in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all materiall, labour and tools and plants, ect required for proper completion of work 17 12 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 18 Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 19 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources) 20 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse and(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 21 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more 23 Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete(Storm water, sewer) 450 mm dai RCC pipes 24 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal) 25 Supply and fixing of precast CC block KC drain. 26 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 mm internal dimensions M30 Grade concrete 27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) brick of class designation 7.5 28 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. asrequired. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 29 Providing and fixing dry cladding upto 10 metre height with 30 mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). Red sand stone work for wall lining etc. 30 mm thick saw cut stone 30 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 31 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) 32 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 33 Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. 34 Providing and Laying of Rubber moulded (Red colour) Interlocking Concrete Block Pavements having thickness 80 mm including leveling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling oints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504. 35 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 36 Taking out existing KERB STONE from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 37 Providing & Laying 150x150 mm with thickness ranging from 70-90mm rough finish granite cobbles stone and shape of approved and complete as per direction of Engineer-in- Charge. including transport ,loading ,unloading and conveyance of Grey cobbles granite from available source to work site, including labor charges for fixing the granite and pointing etc., all complete as per direction of Engineer-in-charge. 38 Providing and laying tactile tile (for vision impaired persons as per stanDSRds) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 39 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete of M30 grade with minimum cement content of 350 kg /cum 40 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete of M40 grade with minimum cement content of 390 kg /cum 41 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 42 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match theshade of stone and pointing with same mortar. . Red sand stone. 43 Providing and laying 15mm thick full synthetic Walking track with 6mm Spray coat EPDM and 9mm SBR surface bonded together including lane separator lines and marking all complete as per the requirements specification laid down. 44 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass bads @ 250 gms per sqm area, thickness of 2.5 mm is excludive of surface applied glass baeds as per IRC: 35 the finished survace to be level, uniform and free from streaks and holes. As per Morth Specification No. 803 45 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick 46 Applying stamping finish to the top surface of freshly laid plain/reinforced cement concrete of specified grade in porticos,sidewalks, driveways, pool decks and open yards as perdirection of the Engineer-in-Charge. The process shall include the following:- * The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting. * After stamping, the curing shall be done as per manufactures specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per the requirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface. * The construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.) : 47 Supplying and fixing 10 Gauge weld mesh of size 100mm x100 mm for floor/roof slab concrete screed over the micro beams as reinforcement. The weld mesh shall be fixed as per drawing. 48 Dismantling and refixing of old available MS grill over boundry wall including straingthening of grill by heating breaking, minor repair of any including fixing together by nuts & bolts/weldingcomplete as per direction of Engineer-in-charg 49 Providing ,fixing and boring/drilling ,installation of1 hp with including all complete work 50 INAUGRATION STONE GRANITE SIZE WITHING WRITUP 750X600 MM ALONG WITH BRICK PEDESTAL 51 Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 52 Artistic wall painting on wall 53 Horticulture Works (Landscaping Work) 54 Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment). 55 Carrigae of sludge upto 5 K.M. 56 Supplying and stacking at site dump manure from approved source including carriage upto 1 km (manure measured instacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm 57 Carrigae of manure upto 5 K.M. 58 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. 59 Spreading of sludge, dump manure or/and good earth in requiredthickness (cost of sludge dump manure or/and good earth to bepaid separately). 60 Digging holes in ordinary soil and refilling the same with theexcavated earth mixed with manure or sludge in the ratio of 2:1by volume (2 parts of stacked volume of earth after reduction by20% : 1 part of stacked volume of manure after reduction by 8%), flooding with water, dressing, including removal of rubbish and surplus earth, if any with all leads and lifts ( cost of manure, sludge or extra good earth if needed to be paid for separately). 61 Holes 0.9 m dia. and 0.90 m deep. 62 Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately). With grass Turf. 63 SEASONAL PLANTS 64 Providing and Displaying Chrysanthemum single variety in different colourwell developed having 45 to 60 cm ht., minimum 100 and above half bloomflowers open well stacked with bamboo stick having three layer tiding bythread fresh and healthy foliage in 25 cm Earthen Pot and as per directionof the officer-in-charge. 65 Providing and Displaying Clarkia well developed with fresh & healthy foliage,5 to 6 branches in full bloom with stacking in 25 cm Earthen Pot/PlasticPot and as per direction of the officer-in-charge. 66 Providing and Displaying Cyclamen hybrid variety specimen 5-6 in a pot,fresh & healthy in full bloom well developed in 35 cm Earthen Tray/ Nand.as per direction of the officer-in-charge. 67 Providing and Displaying Dahlia double kenya variety in different colourwell developed with 3 to 4 flowers in half bloom, good foliage stacked withGreen painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 68 Providing and Displaying Primula Hybrid variety well developed with fresh& healthy foliage with full bloom in 25 cm Earthen Pot/Plastic Pot and asper direction of the officer-in-charge. 69 SUMMER & RAINY SEASONAL PLANTS 70 Providing and Displaying Celosia well developed fresh & healthy 20 to 25cm ht. (attractive) multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 71 Providing and Displaying Cosmos well developed fresh & healthy 20 to 25cm ht. attractive colors multi branching at blooming stage in 20 cm EarthenPot/Plastic Pot and as per direction of the officer-in-charge. 72 ROSE PLANTS 73 Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht.well developed with 8 or more flowers / flower buds in 20 cm Earthen pot /Plastic pot as per direction of the officer-in-charge. 74 Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch90 cm and above ht. well developed with one and above flowers in 25 cmEarthen Pot, as per direction of the officer-in-charge. 75 ORNAMENTAL PLANTS 76 Providing and Displaying Acalypha Different colour well developed, fresh &healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size ofEarthen Pot/ Plastic Pot bushy as per direction of the officer-in-charge. 77 Providing and Displaying Adenium Obesum grafted well developed withfresh & healthy 30 to 60 cm ht. in 25 cm size Earthen Pot/ Plastic Pot asper direction of the officer-in-charge. 78 Providing and Displaying Adenium Obesum well developed with fresh &healthy 4 to 5 branch 60 to 75 cm ht. in 40 cm size Earthen Pot/ PlasticPot as per direction of the officer-in-charge. 79 Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marrypalmar, Cherry Blossom etc. well developed with fresh & healthy bushy infull bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of theofficer-in-charge. 80 Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfranceof base stem well developed as per direction of the officer-in-charge. 81 Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cmht., with fresh and healthy Golden colour foliage in 35cm Cement Pot asper direction of the officer-in-charge. 82 GROUND COVERS PLANTS 83 Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cmand above, with fresh and healthy variegated foliage in 25 cm size ofEarthen Pot/Plastic Pot & as per direction of the officer-in-charge. 84 Providing and stacking of Chlorophytum (Green), full of leafy suckers in 15cm size of Earthen Pot/Plastic Pot & as per direction of theofficer-in-charge. 85 Providing and stacking of Daniella variegated, with 3 to 4 variegated leavesin 20 cm size of Earthen Pot/Plastic Pot & as per direction of theofficer-in-charge 86 TREE PLANTS 87 Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25cm well developed in big poly bags of size 25 cm as per direction of theofficer-in-charge. 88 Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 89 Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 90 Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm.in big poly bags of size 25 cm as per direction of the officer-in-charge.v 91 Providing and stacking of Ficus bengalensis (Bargad) of height 120-135cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 92 Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. inbig poly bags of size 25 cm as per direction of the officer-in-charge. 93 Providing and stacking of Magnolia grandiflora of height 150-165 cm. in bigpoly bag of size 25 cm as per direction of the officer-in-charge.v 94 Providing and stacking of Pinus longifolia (Pinus) of height 90-105 cm. incement pots of size 35 cm as per direction of the officer-in-charge. 95 Providing and stacking of Polyalthia longifolia (Ashok) of height 180-195cm. in gunny bag of size 30 cm as per direction of the officer-in-charge. 96 Providing and stacking of Pterospermum acerifolium (Kanak Champa) ofheight 150-165 cm. in big poly bags of size 25 cm as per direction of theofficer-in-charge. 97 SHRUBS 98 Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm.in earthen pots of size 20 cm as per direction of the officer-in-charge. 99 Providing and stacking of Calliandra hybrida of height 75-90 cm. with 4-5branches in bag of size 25 cm as per direction of the officer-in-charge. 100 Providing and stacking of Cassia biflora of height 90-105 cm., well branched,bushy in big size HDPE bag as per direction of the officer-in-charge. 101 Providing and stacking of Tabernaemontana coronaria (chandni variegated)of height 45-60 cm. with 3-4 branches earthen pots of size 20 cm as perdirection of the officer-in-charge. 102 CREEPER PLANTS 103 Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. inpoly bag of size 20 cm as per direction of the officer-in-charge. 104 Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cmto 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction ofthe officer-in-charge. . 105 Providing and stacking of Passiflora caerulea (Rakhi bel) of height 30 cmto 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction ofthe officer-in-charge. 106 Complete maintenance of the entire garden features having as per yard.(3 month * area of park/rate per sqm) DSR 2020 Horticulture 2.39.5stick in the garden area i.e. lawn trees, shrubs, edge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide, lawn mover and brush cutter with fuel & other T & P material/ articles shall be provided by the department.) 107 ELECTRICAL LIGHTING WORK 108 S/F of 3mtr, Long decorative tree pole outdoor type complete with cdecorative pole in 3 step 100mm dia × 1.524 mtr, 80 mm dia × 1.524 mtr, and 3 nos. 50 mm dia× 0.61mtr. Long and 3 nos. aluninium leaf 0.61 mtr, long in 3 shades with 3 mps/ Suitable size hole for Water ProfLED Sport Light on leaf as given and design specification as E/I. 109 S/F of decorative pearl leaf Sculpture with leaf like slitly boul type making ofMS or al leaf in given Shades Total no ofpear leaf Sculpture6 nos, the hight should be 18 fit, 7.5 fit and widht leaf 5 fit to 2.5 fit. Leaf Mancufechring with Different type Round bar and hole for water prof LED Sport lightfixing on leaf complete with wiring with 1 Sqm Coper Cable total 6 nos. LED sport light required. designe and drawing, specification as E/I. 110 S/F of decorative metal Sun flower with 1 nos.leaf size 3 fit and width 2 fit on 80 mm dia MS pipe Structer the sun flower size 4 fit and yellow colour and red colour in midlle and Suitable size hole for water prof LED in flower or side the MS Structure and leaf pented with green colour total 3 Nos. Structure and lightes in one set Complete with wiring etc.design and drawing, specification as E/I. 111 S/F of decorative flowering sculpteure with 1 nos. one set lotus transperent and coloured perfex sheet on100 mm diaMS pipe Structer 3mtr long andthe folwers width 1.2 fit complite with Suitable size hole forwater prof LED in middle of flowerStructure and lightes in one set Complete with wiring etc.design and drawing, specification as E/I. 112 Supply &fixing of 60 watt LED Sport light with water prouf housing Die cost complete with Suitable Capicity diver set (make philips) 113 Supply & fixing of LT cable armored served sheathed cables 1100 V grade depth of 750mm below ground or cable shall be run on surface fixed on MS clampSOR 2018 SI No.501 114 25 Sqmm × 3.5 core 115 10 Sqmm × 4 core 116 Supply and burring of safe earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of 25 × 3 GI. Strip will be extra) Make : As approved in U.P.P.W.D., & C.P.R.I. CertifiedSOR 2018 SI No. 725 (A) 117 Supply and fixing of plain or pin type copper tin plated cable socket (lug)SOR 2018 SI No. 504 118 25 Sqmm 119 10/16 Sqmm 120 S/B of pole earthing with 20mm die × 2000mm long M/S Rod connected with pole by 6 to 4 swg GI wire complete.As per UPPCL 121 S/F of HDPE Pipe 4Kg./Cmsq size 63mm die.PSR at Rajghat Bridge file 122 S/F of HDPE Pipe 4Kg./Cmsq size 50mm die.PSR at Rajghat Bridge file 123 HDD Drilling by manual of mechanical method PSR at Rajghat Bridge file 124 S/F of GI wire as continuity wire.SOR 2018 SI No.628 125 S/F of GI strip 25mm × 3mm size.SOR 2018 SI No. 716 126 S/F of MCB DP 6 to 32 amp. CAT - ASOR 2018 SI No. 1009 127 CC work asrequired at site for plinth, foundation for panel etc.as given of 1:2:4 CC Foundation in 2cm stone grit, sand mortars and cement.SOR 2020 SI No. 279b 128 Road and divider cutting and maiking good. Complete all material labour complete for all places. As directred by E.I. Rate based on SOR 2021 SI No. 694, DSR 16:13:1 and 16:13:2. 129 Supply and fixing following capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.Rate based on SOR 2018 SI No. 807 130 40 A TPN 131 S/F of 4mtr, Long decorative pole outdoor type complete with decorative pole & 60 watt LED Sport light with water prouf housing Die cost complete
|
