|
Cabinet - High 2 -Door Steel Cabinet With Key Lock, With 4 Shelves Adjustable Every 10 Cm. Made Of Steel Sheet 26/0, 45 Treated With Anti-Ruginous Phosphatization And Epoxy-Phi Painting By Electrostatic Process In Gray, Capacity Of 20 Kg Per Shelf, Approximate Dimensions 198 X 90 X 40 Cm (A X L X P). Approximate Dimensions Of The Structure (A X L X P): 77 X 140 X 75 Cm. Steel Tube Structure, Epoxy Paint Coating, White Color, Ocher Granite Top. Chairs With Chorino Coating, White, Black Or Floral Print, Non -Reclining Backrest. Approximate Dimensions Of The Chair (A X L X P): 90 X 38 X 48 Cm., Round Meeting Table. Approximate Measurements: Diameter: 1200 Mm, Height: 740 Mm, (Maximum Variation Of 5% To Plus Or Less) Surface: Overlapping The Structure. In 25 Mm Thick Mdp Wood (Cluster), Coated In Low Pressure Melamine Laminate Textured On Both Sides. Longitudinal Border With 3Mm Thick Pvc Ribbon Finish, Hot-Glued To The Holt-Melt System, With A Minimum Radius Of 2, 5 Mm, All Over Its Perimeter. Fixed To The Table Structure Through Steel Screws And Metal Bushings. Structure: Surface Support Through X -Shaped Steel Structure. Vertical Column In Round Steel Tube Of 04 (101, 60 Mm) Diameter In Plate #16 (1, 50 Mm) Thick (Minimum). 04 Upper Steel Tube Locking With 20 X 40 Mm Rectangular Section In Chap #18 (1, 20 Mm) Thick (Minimum). 04 Lower (Minimum) Crashes On Arc -Shaped Steel Sheet Steel Shaped #14 (1, 90 Mm) Thick (Minimum) With Rounded Ends On The Same Plate. In The Lower Locking Steel Repux Rivets For Level Regulators Adaptation. Metal Components All Metal Pieces. Multilaminated Plywood 14 Mm Thick With Anatomical Injected Foam With Turning Axial Rolling, High Strength Tempered Steel, Chair Height Adjustment System. Measurements: Height From 115 To 125Cm, Width 62Cm, Total Depth 62Cm And 49Cm Seat Depth. Height Of The Floor Seat: 48 To 58Cm, Arm Height To The Floor: 58 To 68Cm, Supports Up To 130Kg., Cabinet Guard With 04 (Four) Doors Made Of Galvanized Steel With Chemical Treatment Of The Plates. Dimensions 1, 98M High, 32, 5Cm Wide And 40Cm Deep., Table Office W/ 02 Drawers With 02 Drawers, Measurements: Approximately 1, 50 X 0, 60M And Height Of 0, 75M Table: Mdp, 15 Mm Thick Cluster. Finishing Both Faces, With Low Pressure Melaminic Laminate, In The Color Of The Requesting Organ, Headtop With 0, 45 Mm Thick Pvc Ribbon. Drawing: Fixed 03 15Mm Cluster Drawers In Melminoco Bp Both Sides, With 1Mm Edge, Steel -Printed Nylon Stamped Ribbon, With Simultaneous Key And Locking, Front Latch Fixed On Top Drawer. Anti-Inflaxator, And Textured Epoxy Electrostatic Painting, Greenhouse Polymerized, Cured At 200ºc, Multipurpose Cabinet With 2 Doors With 5 Shelves With Key To The Doors. Technical Description: Height: 1, 88M, Width: 61Cm, Depth: 39Cm. Features: Structure Material: Mdp, Color: White
|
