|
Tender For Provision Of Lbcw Wk, Revenue Wk And Certain Spl Repairs To Baramulla And Pattan Under Ge 969 Ews.; 1 Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed. 2 S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. 3 S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. 4 Dismantlingtimber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed. 5 M&L 2nd Class soft wood (Kail) as in scantling, clean swan timber framed and fixed, complete all as specified and as directed. 6 All as per above Srl No 5here-in-before but except timber, complete all as specified and as directed. 7 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets, complete all as specified and as directed. 8 S&F 2nd class soft wood 20 mm thick in facia boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed. 9 S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified & directed 10 All as per Srl No 9 here-in-before but except boarding, complete all as specified and as directed. 11 M&L 4 mm thick veneered decorative plywood ,grade 1 (with BWR resin)with decorative face veneers on one faces,in wallfixed with screws to timber frame work, complete all as specified and as directed. 12 M&L 4mm thick veneered decorative plywood ,grade 1 (with BWR resin)with decorative face veneers on one faces,in ceiling fixed with screws to timber frame work, complete all as specified and as directed. 13 Dismantling timber scantling in fillets rails, posts purlins etc under 40 Sqcm in section in framed work, complete all as specified and as directed. 14 S&F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm, complete all as specified and as directed. 15 S&F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 and not exceeding 13 Sq. cm, complete all as specified and as directed. 16 S&F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm, complete all as specified and as directed. 17 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. 18 M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 graded aggregate) as in floors finished even and fair, complete all as specified and as directed. 19 M&L for 75 mm thick cement concrete of 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified. 20 M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm. in floors set and jointed over and including cement screed base 15mm screed bed in CM 1:4 and pointed in white or coloured cement to match, complete all as specified and as directed. 21 M&L for light shade Non Skid Ceramictiles 9 mm thick (square/rectangular) area of each tile n.exc 0.36 Sqm in floors set and jointed over and including cement screed base 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match, complete all as specified and as directed. 22 M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. 23 Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. 24 S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick plastering with CM (1:4), complete all as specified and as directed. 25 Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site, complete all as specified and as directed. 26 S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening, complete all as specified and as directed. 27 S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C" channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mm x2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of "C" channel using PVC solvent adhesive, complete all as specified and as directed. 28 Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(W/out taking off shutters from the frames), complete all as specified and as directed. 29 S&F 30 mm thick 2nd class soft wood glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats, complete all as specified and as directed. 30 S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws, complete all as specified and as directed. 31 MS Cold rolled Butt hinges medium weight 75 mm long, complete all as specified and as directed. 32 S&F mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed, complete all as specified and as directed. 33 S&F Aluminium anodised barrel tower bolts, 150 mm long complete, complete all as specified and as directed. 34 S&F mild steel pressed handles, oval type ISI marked stove enamelled black complete all as 150mm size, complete all as specified and as directed. 35 S&F Aluminium anodised handles, cast type anodised 125 mm long, complete all as specified and as directed. 36 S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple, complete all as specified and as directed. 37 Hacking out old broken glass from wooden/metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones, complete all as specified and as directed. 38 M&L sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames, complete all as specified and as directed. 39 All as per item No 38 above but pin head type, figuredglass, complete all as specified and as directed. 40 Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc, complete all as specified and as directed. 41 Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc, complete all as specified and as directed. 42 Refixing old 15mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc), complete all as specified and as directed. 43 Refixing old 20mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc), complete all as specified and as directed. 44 S&F 15mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed. 45 S&F 20mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed. 46 Dismantling water tanks and removing to store 1000 ltrs capacity, complete all as specified and as directed. 47 S&F in repairs 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed. 48 S&F in20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed.(Minimum weight 20mm - 210 gms) etc, complete all as specified and as directed. 49 S&F in replacement of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe, complete all as specified and as directed. 50 S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe etc, complete all as specified and as directed. 51 S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed. 52 S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete of approved make, complete all as specified and as directed. 53 S&F repairs Vitreous China wash hand basin with pedestal, white, flat backsize 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair, complete all as specified and as directed. 54 S & F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality, complete all as specified and as directed. 55 S & F in repair 15 mm bore Angle valve fency type valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. 56 S&F repairsCentral hole basin mixer Brass CP for mixing hot & cold water screwed down for iron pipe and fixedfor mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe fixed in repair, complete all as specified and as directed. 57 S&F repairsWall mixer two-in- one Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and for OH shower fixed for 15mm dia bore pipe fixed in repair, complete all as specified and as directed. 58 S&F repairsof Bib tap chromium plated in repair of 15 mm dia bore, screwed for iron pipe, or for brass ferrule, complete all as specified and as directed. 59 S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and as directed. 60 S&F repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. 61 S&F in repair CP soap tray fixed to walls with rubber plugs, complete all as specified and as directed. 62 S&F 125mm dia CP grating doom with/without waste hole (Minimum weight 40 gms), complete all as specified and as directed. 63 S&F (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. 64 S&F chromium plated decorative stainless steel type curtain rods of selective quality designed and colour shall be as directed by GE, complete all as specified and as directed. 65 All as per item No 64 but only bracket of selective quality designed and colour shall be as directed by GE, complete all as specified and as directed. 66 Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out soft and loose soil, complete all as specified and as directed. 67 Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm of loose and soft soil, complete all as specified and as directed. 68 Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.5 M above the starting point, complete all as specified and as directed. 69 Taking down cement or cement lime plaster of any descriptionon brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed. 70 M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth, complete all as specified and as directed. 71 Rendering 10mm thick in patches in cement mortar1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement, complete all as specified and as directed. 72 Demolition of cement concrete reinforcementas required in suspended slabs, beams, lintels etc, complete all as specified and as directed. 73 Providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match, complete all as specified and as directed. 74 M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. 75 Demolition and breaking up 150mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement laid in trenches incl all fittings & accessories, complete all as specified and as directed. 76 M&L PCC 1:3:6 type C-2 concret bed using 40mm graded stone agg to drain pipe including packing under & haunching against the sides of pipe 100 mm dia ( internal) after these are laid in trenches, complete all as specified and as directed. 77 Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 100mm, complete all as specified and as directed. 78 Taking down pipe and eaves gutters(any size and pattern) including all fittings heads shoes bends swan necks etc, complete all as specified and as directed. 79 S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc, complete all as specified and as directed. 80 S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc, complete all as specified and as directed. 81 S&F in repair 110 mm bore PVC (SWR) Bends with accesss door etc, complete all as specified and as directed. 82 S&F in repair75 mm bore PVC (SWR) Bends with accesss door etc, complete all as specified and as directed. 83 S&F in repairs110 mm bore PVC (SWR) junction single (Single T) equal of unequal, complete all as specified and as directed. 84 S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal, complete all as specified and as directed. 85 M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement, complete all as specified and as directed. 86 M&L in repairfor 75 mm PVC (SWR) floor trap setting and jointed with solvent cement, complete all as specified and as directed. 87 Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint, complete all as specified and as directed. 88 Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and as directed. 89 Preparation of old surface of wallincluding brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint on old plastered or un-plastered surface of walls, complete all as specified and as directed. 90 Preparation of newly plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified and as directed. 91 S&F in repairs Framed brackets of angles or tees, rafter purlens with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measuredunder "Structural Steel"), complete all as specified and as directed. 92 S&F glazed ceramic coloured tiles in verticles surfaces of size 600x300x7/9 mm thick set and jointed in neat cement slurry and pointedwhite or coloured cement to match tile surface over and including 10 mm thick plaster in cement andsandmortar (1:4), complete all as specified and as directed. 93 S&F vitreous china urinal, Half Stall type, white (excluding flushing cistern, flush pipe and waste pipe, complete all as specified and as directed. 94 S&F Vitreous china wash basin600mmx450mm including waste pipe, coupling and brackets etc, complete all as specified and as directed. 95 S&F mild steel framed work such as grills, frame work of water taks FE 290 Gde E-165, complete all as specified and as directed. 96 Demolition and breaking up drain pipe 75/100 mm dia (AC, saltglazed, PVC or RCC pipes ) set in cement mortar or any description incl excavation of earth, returning filling, removal and making good, complete all as specified and as directed. 97 M&L for PCC (1:4:8) type D1(using 40 mm grade aggregate ) as in bed to drain pipes including packing under and haunching against the side of pipes after these are laid tested for 150 mm bore of pipes, complete all as specified and as directed. 98 S&F 110mm bore PVC (SWR)bend, plain including jointing with solvent cement, complete all as specified and as directed. 99 Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar, complete all as specified and as directed. 100 M&L for brick work with sub class "B" bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:4), complete all as specified and as directed. 101 M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory ompaction by using plate vibrator, filling he joints with fine sand and cutting of paver block as per required size and attern, finishing and sweeping extra sand, complete all as specified and as directed. 102 M&L for providing cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stop, rounded or chamfered on edges, complete all as specified and as directed. 103 Soakage well exc in ordinary soil foundation in PCC 1:3:6 well of honey combed and solid in M-25 concrete including intercepting chamber screen chamber and excavation work ,brick work in CM 1:4, RCC cover slab in M-25/RR Masonary/filling with brick bats, complete of size 1.80M dia x 3.00m deep, complete all as specified and as directed. 104 M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate),in foundation, filling and mass concrete, complete all as specified and as directed. 105 M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built inCM (1:6), complete all as specified and as directed. 106 M&L for brick work with sub class "B" bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6), complete all as specified and as directed. 107 M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and as directed. 108 M&L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.(Note -W P C shall be measured and paid separately). 109 M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint, complete all as specified and as directed. 110 M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. 111 S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane, complete all as specified and as directed. 112 S&F 150mm long aluminium anodised cast typealumiinium handle ISI marked, complete all as specified and as directed. 113 S&F Water closet (Orrissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs, complete all as specified and as directed. 114 S&F 100mm bore PVC (SWR)"T "any radius, complete all as specified and as directed. 115 S&F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement, complete all as specified and as directed. 116 S&F 15mm bore Bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. 117 S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water, complete all as specified and as directed. 118 S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water, complete all as specified and as directed. 119 S&F 25mm PPR Gate valve inserted as per requirement of site, complete all as specified and as directed. 120 S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms), complete all as specified and as directed. 121 S&F Vitreous china wash basin600mmx450mm including waste pipe, coupling and brackets etc, complete all as specified and as directed. 122 M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. 123 Construction of LLDPE Septic tank exc inordinary soil foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all arround/fiber reiforced cover with angle iron frame vent shaft and sludge chamber etc complete for 10 userscomplete all as specified as per manufactures instructions. 124 Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia and 3m depth,completeall as specified and as directed. 125 RCC NP3 150 mm diameter Pipes laid on150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functionalfor depth 0.70m to 1.65m, complete all as specified and as directed. 126 Supply and fix Gun metal gate valve of size 20mm size,complete all as specified and as directed. 127 M&L for cutting of existing line including all accessories, complete all as specified and as directed. 128 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil, complete all as specified and as directed. 129 S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and as directed. 130 S&F rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe -410W -(Gde E-250 Quality A) all as specified and as directed . 131 M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. 132 Surface excavation n. exc 30 cm deep and averaging 15 CM deep and getting out in hard dense soil, complete all as specified and as directed. 133 Removing excavated material exc. 250m but n. exc. 500m and depositing where directed at a level n. exc. 1.5m above the starting point all as specified and as directed . 134 M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; Flat surface fair finishing, complete all as specified and as directed. 135 M&L For cement concrete type B-0 1:2:4 (using 12.5 mm graded aggregate ) 150 mm thick as sub base complete all as specified & directed 136 M&L Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, complete all as specified and as directed. 137 Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A for 100 mm thick cement concrete, complete all as specified and as directed. 138 Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing, complete all as specified and as directed. 139 Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches. ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe Custody for reuse at site and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed. 140 M&Lfor point wiring inPVCcasing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor 141 (a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way 142 (b)One 3 pin 5 Amp switch socket outlet on independent board. 143 (c)One 3 pin 5 Amp switch socket outlet on same board with accessories. 144 M&Lfor point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor. 145 S&F switch Piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed. 146 S&F switch Piano Flush type, single pole, 15 amp 240 volts, complete all as specified and directed. 147 S&FSocket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box, complete all as specified and as directed. 148 S&FSocket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed. 149 S&FSwitch socket combination 2 in1, 3 pin, 5 and 15 Amp flush type, universal, complete all as specified and as directed. 150 Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed. 151 S&F Distribution Board, SPN, 8 Way,Double door complete all as specified and as directed. 152 S&F in repairs MCB ,SPN 63 Amps 240 Volts C curve, complete all as specified and as directed. 153 S&F in repairs MCB DP 40 Amps 240 Volts B curve, complete all as specified and as directed. 154 S&F MCB single pole 6-32A amps 240 Volts B curve, complete all as specified and as directed. 155 S&F LED lights fitting 1x20 Watt , 220 Volt AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. 156 S&F LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. 157 S&F, LED bulb 12 W, 220 V suitable size from ceiling rose, complete all as specified and as directed. 158 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. 159 S&F lamp Holder, PVC/Polycarbonate type with black plate suitable for batten fitting, complete all as specified and as directed. 160 S&F 1100 V grade heavy duty U/G cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tapeand overall pvc sheathed one twin core cable flat or circular of size 16 Sqmm X 2 Core, complete all as specified and as directed. 161 S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wirescomplete all as specified and as directed. 162 S&F, stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, complete all as specified an as directed. 163 Supply& fixing in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan complete all as specified and as directed. 164 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all acessories such as safety valve, thermstate, NRV, connection piece etc. 165 S&F electric water heater, storage vertical type outer body Engineering Thermoplastic plastic with puf injected type insulation, Steel tank with glass lined coating inner tank and heating element (Copper tube) upto 2KW capacity 25 litre, 230 volts AC single phase BEE 5 Star rated complete with all accessories such as FR Grade 3 core PVC Cord, multifunctional safety valve, thermostate, connection piece etc, complete all as specified and as directed.Note : Internal water supply upto service connection will be measured and paid separately under B/R item. 166 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and as directed. 167 Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150mm,complete all as specified and as directed. 168 M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm diaPVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed.Note: Two runs of 6 Sqmm and one run of 6 Sqmm cable and one run of casing capping shall be measured as one RM 169 Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding Complete all as specified and directed by Engineer-In-Charge.Note : Spares used and rewinding shall be measured and paid seperatly under relevant item. 170 M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc 171 Note:- Schedule of credit Rs 41,326.50 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
|
