|
Tender For Trauma Surgery Endoscopic Equipment - The Trauma surgery endoscopic equipments comprises for surgeries related Endoscopic Lumber Discectomy & Root decompression for all types if disc Herniation from Central to Far-Lateral disc and for treatment of Lumber stenosis along with Bilateral decompression using Unilateral Approach - Fix System. The equipments used are as follows. The approximate size of the items mentioned is summarised below. The compliance sheet with catalogue number shall be duly filled. Dilation Sleeve, graduated, inner diameter 1.5mm, Outer diameter C165.2 mm, length 23cm. Dilation Sleeve, OD8.9 mm, ID 5.3 mm, graduated, length 21 cm. Dilation Sleeve, graduated, inner diameter 9 mm, outer diameter 12.7 mm, length 19 cm. Dilation Sleeve, OD14.9mm, ID12.9mm, graduated, length 17cm. Dilation Sleeve, OD16.9 mm, ID15.1 mm, graduated, length 15cm. Dilation Sleeve, OD18.9 mm, ID17.1 mm, graduated, length 14 cm. Dilation Sleeve, OD20.9 mm, ID19 mm, graduated, length 13 cm. Trocar Attachment, diameter 15 mm Telescope Holder, diameter 15 mm Trocar, diameter 15 mm, working length 70 mm, for use with Trocar Attachment, telescope holder and telescope Trocar Attachment, diameter 19 mm Telescope Holder, diameter 19 mm Trocar, diameter 19 mm, working length 70 mm, for use with Trocar Attachment, telescope holder and telescope Trocar Attachment, diameter 23 mm Telescope Holder, diameter 23 mm Trocar, diameter 23 mm, working length 75 mm, for use with Trocar Attachment, telescope holder and telescope Telescope 25-30°, eyepiece angled minimum 90°, diameter 3.5-4mm, length minimum 9cm, scope should be autoclavable with fiber optic light transmission incorporated, scope for use with 70-75mm long 15mm, 19mm & 23mm Trocars for all endoscopic discectomies. Bone Punch, should be able to dismantle in 2 parts, should be of bayonetshape with downbiting 40° forward 2 mm, should have working length 17 cm Bone Punch, should be able to dismantle in 2 parts, should be of bayonetshape with Upbiting 40" forward 2 mm, should have working length 17 cm Spoon Forceps/Disc Forcep/ Cup Forcep/ Neclus Cutting Forcep, working length 15 to 22cm Palpation Hook, straight, distally 8-10 mm long and angled 80-90°, with ball tip, working length 20-22 cm Nerve Retractor, angled 25-30°, distal width 4-5 mm, working length 17-18cm Nerve Hook, distal width 2.5-3 mm, bayonet-shaped, working length 16-18 cm Articulated holding arm, L-shaped arm with mechanical central clamp for all five joint functions, height 48-50cm, operating range 50-52cm with fastener. Socket to clamp on the operating table for use with European and United States standard rails should also be suited rails from 25x10 up to 35x8 mm. should be with lateral clamping element for height adjustment of the articulated holding arm Stitch less Surgery performed under Local anesthesia. Percutaneous Spinal Lumbar Endoscopy for Decompression of lateral and central canal. Wide Angle Telescope 25° 30°, oblique view, outer diameter 6 to 7mm, working channel diameter 3.4 to 4.2 mm Length 15 to 20 cm, autoclavable, fiber optic light transmission incorporated. Operating Sheath, distal 45° oblique, integrated irrigation adaptor, outer diameter 7 to 8 mm, length 17 to 19 cm. Dilation Sleeve, with minimum two ports/holes for guide wire, outer diameter 6 to 7 mm, inner diameter 1 to 2mm, length 22 cm, Light weight Mallet, with Nylon replacement, length minimum 22.5 cm Punch Sleeve, for use with operating sheaths. For tapping of sheath purpose. Mallet tapping surrface replaclable. Palpation Hook, 360 degree rotating, dismantling with working insert and handle, bendable to 85-90°, diameter 34 to 3.6 mm, working length 35 to 37 cm. Should be in 2 parts handle and forceps insert. Annular cutter with distal hook, 360 degree rotatable, single jaw moving size 3 to 3.5 mm, working length 34-36cm, Should be in 2 parts handle and forceps insert. Grasping forceps with minimum 80-90" opening, single jaw moving action, Diameter Ø 3.2 to 3.5 mm, working length 34 to 36 cm Grasping Forceps, 360 degree rotating, should be with working insert and handle, should be insulated, single jaw movement, jaw should be fenestrated, jaw size 2.5 to 3 mm, length 34 to 36 cm, Should be in 2 parts handle and forceps insert. Trephine, with round handle for puncturing calcified annulus, should be compatible with working channel of scope. Should be able to pass through working channel of scope. Endoscopic Lumber Discectomy & Root decompression for all types if disc Herniation from Central to Far-Lateral disc and for treatment of Lumber stenosis along with Bi - lateral decompression using Unilateral Approach-Mobile System Localization Device, for fluoroscopic determination of the point of incision Telescope 0°, enlarged view, diameter 4 mm, length 18 cm, autoclavable, fiber optic light transmission incorporated. Operating Tube, oval, with obturator, for use with working insert. Working Insert, with positioning detent, with adjustable Nerve Protector, for use with Operating Tube, with working channel diameter 8 mm and irrigation channel, for use with Telescope. Chisel, flat, straight, with handle, distal width 15 mm, working length 9 cm Suction Tube, angled, with cut-off hole, diameter 3.7 mm, working length 11 cm Spoon Forceps, dismantling, robust, oval, single action jaws, spoon size 3 x 10 mm, working length 15 cm Elevator, spatula slightly curved, distal width 5 mm, working length 13 cm Palpation Hook, blunt, distally angled 90", hook length 5.5 mm, working length 13 cm Trephine, with round handle, diameter 3 mm, working length 22 cm Bone Punch, dismantling, 90° upbiting, not through-cutting, 3 mm, working length 18 cm Bone Punch, dismantling, upbiting 45° forward, not through-cutting, 3 mm, working length 18 cm Bipolar Forceps, rounded tip, width 1.9 to 2 mm, outer diameter 3.3 to 3.4 mm, working length 19 to 20 cm. Bipolar High Frequency Cord with 2 x 4 mm banana-plug, length 300 cm RF Ablation System Radio Frequency unit with 5 no of RF probes shouid be supplied to be used in Transforaminal Spine endoscopy system LED 175 with Fiber optic cables shall be supplied. . Cold Light Fountain LED Light Source Lumens: 2100 and above Color Temperatures 6000K Light Outlets-1 Lamp life of approx. 30,000 hrs 4.8 mm Fiber Optic Cable and 550 cm Long Holding Arm for 3D Video Exoscope Mechanical Mobile Holding Arm with quick release coupling. Holding arm should be mobile. It should be long enough to reach to surgical site. It should be Spring arm with quick release coupling of video exoscope with different clamps. It should have caster wheels with lock. Should be supplied with Exoscope holding clamp-1 Qty IMAGE/VIDEO RECORDING AND DATA ARCHIVING SYSTEM capable of record in 3D, 2D& 4K State of the art user friendly medical grade system (certified to be used in OT) should be offered with following features User should have full control of the system from the sterile field via camera head buttons, optional touch screen and optional foot switch. Parallel (Synchronic or Independent) recording of 2 image sources. Still images and videos (optional with audio) in 2D, 3D and 4K. and overview of open/automatic save processes. editing of still images and videos. Playback of 2D, 3D and 4K content operating system and it is only possible to run certified software. Storage on internal memory (2 TB, FIFO), USB storage media via 2.0 and 3.0, optical media (DVD writer, Blu-ray reader), network drive, FTP or via DICOM. Scalable range of functions. the system in order to allow the surgeon to view all the DICOM 3 images stored in the PACS system on a digital light box within the operating rooms. Furthermore, all intra operative images recorded can be sent via the DICOM 3 interface to the PACS system for further processing Note- All the equipments should be US FDA/ CE approved and certification shall be enclosed.
|
