|
Tender For Provision Of Covered Bathing Pt At Bldg No P-205 At Bhagat Line, Organic Waste Composter, Biodegradable Waste Shredding And Composting Machine, Hard Standing At Offrs Mess Under Ge (South) Meerut Cantt; 1 Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in hard/dense soil complete all as specified and directed. 2 M&Lfor cement concrete type D-2, 1:4:8 (using 40mm graded agg) as in foundations, filling and mass concrete complete all as specified and directed. 3 M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. 4 M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed. 5 M&L for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed. 6 M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed. 7 Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. 8 M&L for hardcore (broken stone or boulders) of gauge nexc 63mm, deposited, spread and levelled in layers nexc 15cm thick, watered and rammed to a true surface complete all as specified and directed. 9 M&L for 75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub-base complete all as specified and directed. 10 M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) 11 M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. 12 M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete 13 M&L for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) as in sub-base complete all as specified and directed. 14 M&L for 75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed. 15 M& L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type A complete all as specified and directed. 16 M& L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. 17 M&L for providing, cement concrete type B-1, 1:2:4 (20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed 18 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed. 19 S&F Fe-290 (Gde E-165) MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, nut bolts, MS plate etc complete all as specified and directed. 20 S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 21 M&L for preparation new steel & iron surface of any description, not otherwise, descried, over 10cm width or girth applying two coats of synthetic enamel paint over one coat of red oxide (zine chrome) complete all as specified and directed. 22 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil complete all as specified and directed. 23 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point hard/dense soil complete all as specified and directed. 24 "Supply, erection and commissioning of fully automatic organic waste composter(OWC) /Bio-Digester including all necessary electrical fittings and plumbing having capacity of 250 Kgs/ day both dry and wet waste at two difference locations. The technical specifications of the OWC shall be as under: - (a) Overall dimension - 2600X1142X1450 mm (b) Type of machine - Fully Automatic (PLC Based) (c) Machine Weight - 1.20 Tonne (d) Material of - Stainless steel SS 202/304 construction (e) Operations - Fully Automatic (f) Power - 7.87KW (g) Motor - 1.5KW and above (h) Fan - Heavy duty of 0.37 KW (i) Heater - 6 KW (j) Capacity(Waste to compost converter machine)-250 Kgs/day. (k) Material shredding before process – High Technology Twin shaft shredder inbuilt in the machine for bones and hard items shredding. (l) Volume reduction - 85-90% (m) Control Panel - Provided with HMI display and automatic controls (n) Shredder - Twin Shaft Shredder with all stainless steel Blades. (o) Rotating Drum - Stainless steel SS 202/304 (p) Rotating Shaft - Stainless steel SS 202/304 (q) Compost output - Stainless steel SS 202/304 door (r) Feeding - From the top (s) Discharge - From the side bottom (t) Gear motor/BEE - 3 and above Star Rating (u) Safety features - Emergency switch, overload indication function and safety switch and Internal mixing blades Automatically stop when input door is opened Make – Ecovibes (ES-250)/SMS Hydrotech(FS250)/Ornate Naturale(OWC-250) Note-Minor deviations in above tech specification as per OEM specification is allowed subject to approval of GE. " 25 Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified and directed. 26 M&L for 60mm thick coloured with grey cement and pigment machine pressed rubber moulded (comparising of red & yelow colour) interlocking pavers M-30 in approved design/colour set laid over 25mm thick coarse sand and all as specified and directed. 27 M&L for use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. 28 M&L for form work to sides and soffits of beams lintels etc finished fair complete all as specified and directed. 29 M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 30 M&L for mild steel TMT bars 5 mm dia and over upto and including 10mm dia as in stirrups complete all as specified and directed. 31 M&L for RCC 1:2:4 Tybe B1 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed. 32 M & L for RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified and directed. 33 Material & labour for brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and direceted. 34 M&L for brick with fly ash old size bricks, straight or curved on plan to any radius in half brick thick in CM 1:4 complete all as specified and direceted. 35 Material & labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed. 36 M&L for non Skid ceramic tiles 8 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, (400 x 400 x 8mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement joint free non skid tiles.to match 15mm thick screed bed in CM 1:6 complete all as specified and directed 37 Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed. 38 S&F structural steel work for in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240complete all as specified and directed. 39 S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made 40 S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) 41 Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed. 42 S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and direceted. 43 Supply & fix butt hinges, 100 mm long of stainless steel, complete all as specified & directed. 44 Supply & fix in PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. 45 Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed. 46 S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed. 47 S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and direceted. 48 M&L for PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore complete all as specified and direceted. 49 Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed. 50 S&F Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 20 mm pipe complete all as specified and direceted. 51 Supply & fix bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed. 52 Supply & fix in vitreous china wash hand basin, white, oval type of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed. 53 Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed. 54 Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) triple layers hoisted and fixed in position with all fittings including 20mm brass float valve complete all as specified & directed. 55 M&L for granite 18-20mm thick (of any type table rubbed and polished in steps, Jambs pillars platform and like with round edging complete all as specified and directed. 56 Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. 57 Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. 58 Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed. 59 Supply and fixing in repair looking mirror 1200x600 mm bevelled edges of selected quality glass mounted on 6mm commercial ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed by Engineer-in-Charge.
|
